• 미생물학회지
• /
• 제19권2호
• /
• pp.63-77
• /
• 1981

The growth rate of yeast population (Saccharomyces uvarum) cultivated in the Knopp's modified medium (plus various carbon sources) appeared the highest value when the Knopp's minimal medium was treated to 1.5% with disaccharide such as maltose and sucrose. Also the treatment of lactose and raffinose resulted in polulation growth as to the population size in case of maltose and sucrose. However, the gorwth of yeast was not occurred at all when a polysaccharide, such as inulin, was added as carbon source. The growth from of yeast population in Knopp's modified medium are characterized by the fact that log phase continued 100hrs after inoculation and that stationary state phase appeared in general 250hrs after inoculation. Applying the various carbon sources to respiration substrate for yeast cell, the respiration rate of yeast showed the highest value in treatment of maltose and followed in order of raffinose, lactose, glucose, and sucrose. Determined the amount of poly-phosphate and turn over pathway of poly-phosphate according to culture phase of yeast, it is revealed that the yeast synthesized 3 types of poly phosphate (poly-P A,B, and C) and postulated that turn over pathway of poly-phosphate as follows ; Inorganic phosphate is converted into each kind of polyphosphates, and then one part of poly-P-C is converted into poly-P-B, the rest poly-p-C and poly-P-B are converted into poly-P-A. The synthesized poly-phosphate is considered to have a role as energy pool utilizing to synthesis of cellular organic materials. Of the 13 carbon sources used in this experiment, the useful carbon sources for biosynthesis of poly-phosphate and cellular organic materials are confirmed as disaccharide (maltose and sucrose) as well as glucose. Protein synthesis in yeast cell showed the two peaks on 6th and 8th day after inoculation ; nucleic acid on 2nd day (48hrs), carbohydrates on 2nd day (48hrs), and phospholipid on 2nd and 8th day after inoculation, respectively.

• 한국농림기상학회지
• /
• 제18권4호
• /
• pp.242-252
• /
• 2016

생태계 과정 모형인 BIOME-BGC를 이용해 국내 상록침엽수림의 탄소-물 순환 과정의 계절 및 연간 변화를 모의하여 국내의 소나무 고사 현상의 기후-토심 영향을 분석하였다. 연구지로 2009년과 2014년 각각 소나무 대량 고사가 발생한 밀양과 울진을 선정하였다. 두 지역의 표준강수지수를 산정한 결과 약 5년 내외의 주기의 가뭄현상을 판별하였다. 2000년 중반 이후 가뭄은 고온 건조 기후 특성을 보였다. 모형의 여러 변수를 조사한 결과, 임시탄소저장소인 Cpool 변수가 탄소기아에 의한 소나무고사 현상과 개연성이 큰 변수로 나타났다. Cpool의 감소는 총일차생산성(GPP) 감소 혹은 유지호흡(Rm) 증가의 결과로 발생하였고, 연구기간 중 Cpool이 최저값을 보인 해는 각 연구지역에서 소나무 대량 고사가 발생한 해와 잘 일치하였다. 두 지역 모두 가뭄에 의한 GPP 감소와 고온에 의한 Rm 증가가 Cpool의 감소를 초래하였는데, GPP와 Rm의 상대적 기여도는 지역별로 상이하였다. 특히 저온다습한 울진의 경우 Rm 증가 영향이 중요한 요인이었다. 한편 낮은 토심에서 생산성, 생체량, 증산량, Cpool 등 제반 탄소-물 관련 변수가 감소하였고 연간 변동폭이 증가하였다. 그러나 0.5 m 이하 토심에서는 Cpool에 큰 차이가 없는 것으로 보아 일정 수준 이하의 토심에서 생체량-생산성-유지호흡 간의 균형에 따라 Cpool이 유지되는 적응 메커니즘이 나타난 것으로 보인다. 이 연구의 결과 소나무 고사와 관련한 고온건조-탄소 기아 가설을 제안하였고, 보다 현실적 분석을 위한 향후 모형 개선 방향을 제안하였다.

• Journal of Ecology and Environment
• /
• 제43권2호
• /
• pp.161-182
• /
• 2019

Quantifying the amount of carbon pools in forest ecosystems enables to understand about various carbon pools in the forest ecosystem. Therefore, this study was conducted in the Chilimo dry afromontane forest to estimate the amount of carbon stored. The natural forest was stratified into three forest patches based on species composition, diversity, and structure. A total of 50 permanent sample plots of 20 m × 20 m (400 ㎡ ) each were established, laid out on transects of altitudinal gradients with a distance of 100 m between plots. The plots were measured twice in 2012 and 2017. Tree, deadwood, mineral soil, forest floor, and stump data were collected in the main plots, while shrubs, saplings, herbaceous plants, and seedling data were sampled inside subplots. Soil organic carbon (SOC %) was analyzed following Walkely, while Black's procedure and bulk density were estimated following the procedure of Blake (Methods of soil analysis, 1965). Aboveground biomass was calculated using the equation of Chave et al. (Glob Chang Biol_20:3177-3190, 2014). Data analysis was made using RStudio software. To analyze equality of means, we used ANOVA for multiple comparisons among elevation classes at α = 0.05. The aboveground carbon of the natural forest ranged from 148.30 ± 115.02 for high altitude to 100.14 ± 39.93 for middle altitude, was highest at 151.35 ± 108.98 t C ha^-1 for gentle slope, and was lowest at 88.01 ± 49.72 t C ha^-1 for middle slope. The mean stump carbon density 2.33 ± 1.64 t C ha^-1 was the highest for the middle slope, and 1.68 ± 1.21 t C ha^-1 was the lowest for the steep slope range. The highest 1.44 ± 2.21 t C ha^-1 deadwood carbon density was found under the middle slope range, and the lowest 0.21 ± 0.20 t C ha^-1 was found under the lowest slope range. The SOCD up to 1 m depth was highest at 295.96 ± 80.45 t C ha^-1 under the middle altitudinal gradient; however, it was lowest at 206.40 ± 65.59 t C ha^-1 under the lower altitudinal gradient. The mean ecosystem carbon stock density of the sampled plots in natural forests ranged from 221.89 to 819.44 t C ha^-1. There was a temporal variation in carbon pools along environmental and social factors. The highest carbon pool was contributed by SOC. We recommend forest carbon-related awareness creation for local people, and promotion of the local knowledge can be regarded as a possible option for sustainable forest management.

• Journal of Ecology and Environment
• /
• 제41권12호
• /
• pp.336-344
• /
• 2017

Background: Because of climate change, interest in the development of carbon pools has increased. In agricultural ecosystems, which can be more intensively managed than forests, measures to control carbon dioxide ($CO_2$) emission and absorption levels can be applied relatively easily. However, crop residues may be released into the atmosphere by decomposition or combustion. If we can develop scientific management techniques that enable these residues to be stocked on farmland, then it would be possible to convert farmlands from carbon emission sources to carbon pools. We analyzed and investigated soil respiration (Rs) rate characteristics according to input of carbonized residue of red peppers (Capsicum annuum L.), a widely grown crop in Korea, as a technique for increasing farmland carbon stock. Results: Rs rate in the carbonized biomass (CB) section was $226.7mg\;CO_2\;m^{-2}h^{-1}$, which was 18.1% lower than the $276.9mg\;CO_2\;m^{-2}h^{-1}$ from the red pepper residue biomass (RB) section. The Rs rate of the control was $184.1mg\;CO_2\;m^{-2}h^{-1}$. In the following year, Rs in the CB section was $204.0mg\;CO_2\;m{-2}h^{-1}$, which was 38.2% lower than the $330.1mg\;CO_2\;m^{-2}h^{-1}$ from the RB section; the control emitted $198.6mg\;CO_2\;m^{-2}h^{-1}$. Correlation between Rs and soil temperature ((Ts) at a depth of 5 cm) was $R^2=0.51$ in the RB section, which was higher than the other experimental sections. A comparison of annual decomposition rates between RB and CB showed a large difference, 41.4 and 9.7%, respectively. The results showed that carbonization of red pepper residues reduced the rates of decomposition and Rs. Conclusions: The present study confirmed that the Rs rate can be reduced by carbonization of residue biomass and putting it in the soil and that the Rs rate and Ts (5 cm) were positively correlated. Based on the results, it was determined that approximately $1.2t\;C\;ha^{-1}$ were sequestered in the soil in the first year and $3.0t\;C\;ha^{-1}$ were stored the following year. Therefore, approximately $1.5t\;C\;ha^{-1}year^{-1}$ are expected to be stocked in the soil, making it possible to develop farmlands into carbon pools.

• 설비공학논문집
• /
• 제27권1호
• /
• pp.1-7
• /
• 2015

A boiling heat transfer system is used in a variety of industrial processes and applications, such as refrigeration, power generation, heat exchangers, cooling of high-power electronics components, and cooling of nuclear reactors. The critical heat flux (CHF) is the thermal limit during a boiling heat transfer phase change; at the CHF point, the heat transfer is maximized, followed by a drastic degradation beyond the CHF point. Therefore, Enhancement of CHF is essential for economy and safety of heat transfer system. In this study, the CHF and heat transfer coefficient under the pool-boiling state were tested using multi-wall carbon nanotubes (MWCNTs) CM-95 and CM-100. These two types of multi-wall carbon nanotubes have different sizes but the same thermal conductivity. The results showed that the highest CHF increased for both MWCNTs CM-95 and CM-100 at the volume fraction of 0.001%, and that the CHF-increase ratio for MWCNT CM-100 nanofluid with long particles was higher than that for MWCNT CM-95 nanofluid with short particles. Also, at the volume fraction of 0.001%, the MWCNT CM-100 nanofluid indicated a 5.5% higher CHF-increase ratio as well as an approximately 23.87% higher heat-transfer coefficient increase ratio compared with the MWCNT CM-95 nanofluid.

• Journal of Ecology and Environment
• /
• 제38권1호
• /
• pp.75-84
• /
• 2015

Tropical forests play a critical role in mitigating climate change, and therefore, an accurate and precise estimation of tropical forest carbon (C) is needed. However, there are many uncertainties associated with C stock estimation in a tropical forest, mainly due to its large variations in biomass. Hence, we quantified C stocks in an intact lowland mixed dipterocarp forest (MDF) in Brunei, and investigated variations in biomass and topography. Tree, deadwood, and soil C stocks were estimated by using the allometric equation method, the line intersect method, and the sampling method, respectively. Understory vegetation and litter were also sampled. We then analyzed spatial variations in tree and deadwood biomass in relation to topography. The total C stock was 321.4 Mg C $ha^{-1}$, and living biomass, dead organic matter, and soil C stocks accounted for 67%, 11%, and 23%, respectively, of the total. The results reveal that there was a relatively high C stock, even compared to other tropical forests, and that there was no significant relationship between biomass and topography. Our results provide useful reference data and a greater understanding of biomass variations in lowland MDFs, which could be used for greenhouse gas emission-reduction projects.

• Journal of Welding and Joining
• /
• 제23권1호
• /
• pp.69-76
• /
• 2005

Recently, application of arc welding to galvanized carbon steel sheet is on the increasing Ould in the fields of automobile and construction industries. In arc welding process, zinc is evaporated in weld pool, even under the appropriate welding condition and produce blowhole and/or pit. Zinc gas cause instability of arc and increase spatter and fume. This research is purposed to minimize the heat-input and the formation of porosities in the welded joint of the galvanized carbon steel sheet using variable polarity AC wave pulse MIG welding system. An appropriate welding condition which showed low spatter and good bead appearance was acquired by applying the AC pulse MIG welding machine to DC duplicated MIG welding with the solid wire. When oxygen gas was added to shield gas of MIG welding for galvanized steel sheet, arc length was increased and arc stability was improved. In the AC duplicated welding, the loss of galvanized layer was decreased as the amount of heat-input was decreased when the EN ratio was increased under the condition that average welding current was evenly set.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.433-438
• /
• 2012

We have studied on welding dissimilar materials of Carbon steel SCP1-S by using laser beam. In this research we have performed some experiments to know the possibility of welding dissimilar materials using laser beam and magnetic fields by adjusting the power output of 35W laser. Other conditions of the experiments were as follows : the welding speed was varied in the range 10 m/min nitrogen gas was used as shield gas, the flow value of shield gas was ranged 10 L/min. In order to ascertain of the welded surface, we have done the tensile strength testing, the hardness testing and the microscope observation. As a result, we have found that tensile strength was the highest at the condition of the welding speed of 10mm/s, the flow value of 10 L/min, the gap of two materials 0, and the use of nitrogen gas. Above testings have also showed that the tensile strength was generally satisfactory since the penetration of welding was almost complete due to the thinness of the materials. In addition, the formation of the welded area was excellent when it had the highest tensile strength.

• Journal of the Korean Wood Science and Technology
• /
• 제52권2호
• /
• pp.175-190
• /
• 2024

The increase in atmospheric carbon dioxide concentrations is known to be closely associated with climate change and global warming. In this sense, considering that facilities for appropriate education and experience on wood, which is a carbon pool, have been required, this study targets the Wood Cultural Experience Centers, which are in current operation, examines and evaluates their operation status and policy changes, and ultimately derives a successful positioning plan. To this end, it conducts a survey, and the results are as follows. First, as a result of the similarity analysis (KYST: Kruskal-Young-Shepard-Torgerson program) with facilities with leisure activities and educational functions, the Wood Cultural Experience Center have competition with natural recreation forests in terms of naturalness, and it has competition with the career experience center and youth training center in terms of experiential observation. Second, the result of positioning analysis of the attribute space map indicates that the Wood Cultural Experience Center is positively perceived in terms of such attributes as naturalness, experiential learning or recreation, and preservation of natural environment, but is negatively recognized in terms of accessibility, escape from daily life, and things to see.

• 한국환경농학회지
• /
• 제35권3호
• /
• pp.159-165
• /
• 2016

과수원에서 발생하는 전정가지 부산물로부터 생산한 바이오매스 탄화물의 토양내 처리효과를 구명하기 위하여 배 전정가지를 활용하여 탄화물을 생산하고 이를 배 과원 토양에 투입하여 토양 화학성 변화와 토양 탄소 저장 잠재량을 비교 검토하였다. 배 전정가지 유래 탄화물은 방향족 화합물 형태를 유지하고 탄소함량도 62%로 매우 높았으며, 과원 토양의 유기물함량은 탄화물의 투입량이 많을수록 통계적으로 유의하게 증가하였다. 탄화물 투입 166일 후 토양 탄소저장 잠재량은 바이오매스 탄화물 시용 수준이 높을수록 증가하는 경향을 나타냈으며, 통계적으로 유의한 차이를 나타냈다. 대조구, C-1 그리고 C-2 처리구에서 각각 토양 탄소저장 잠재량은 40.1, 49.3 그리고 57.8 Mg/ha으로 나타났다. 토양 탄소저장 잠재량은 탄화물 투입량에 따라 고도로 높은 상관관계 (P < 0.001)를 나타내며 증가하였다. 기울기가 1.496인 1차 회귀방정식을 나타냈으며, 탄화물 투입량이 100 kg/ha 높아질수록 토양 탄소 저장 잠재량은 0.1496 Mg/ha 증가하였다. 이러한 결과를 미루어 볼 때 장기간 동안 지속적으로 바이오매스 탄화물을 시용한다면 토양 탄소의 중요한 공급원이 되며 결론적으로 농경지가 토양 탄소저장원으로서의 역할을 할 수 있을 것으로 판단된다.