• 멤브레인
• /
• 제25권1호
• /
• pp.60-66
• /
• 2015

다공성 전극표면에 이온교환고분자를 직접 casting하여 만들어진 복합탄소전극의 성능을 알아보기 위해서 NaCl 수용액을 이용하여 흡착시간, 공급액 농도, 유속, 탈착전압에 따라 흡/탈착실험을 진행하였다. 유입수가 100 mg/L일 때 동일 조건에서 흡착시간이 3분에서 5분으로 증가하면서 제거율이 3% 증가하였는데 이는 유입수의 셀 내부 잔류시간의 증가로 인한 것으로 사료되며 또한 유속이 15 mL/min에서 23 mL/min 증가하면서 효율이 12% 정도 낮음을 보인 것은 유속이 상승하면서 유입수의 셀 내부 잔류시간이 짧아지면서 나타나는 영향으로 사료된다. 유입수의 농도를 200 mg/L로 증가하였을 때 효율은 100 mg/L보다 10~15% 정도 낮은 값을 보였는데, 이는 탈착구간에서 완전탈착이 되지 않아 나타나는 것으로 판단된다.

• The Korean Journal of Physiology and Pharmacology
• /
• 제4권1호
• /
• pp.41-46
• /
• 2000

Using fluorescence polarization of 12-(9-anthroyloxy)stearic acid (12-AS) and 2-(9-anthroyloxy)stearic acid (2-AS), we evaluated the differential effects of local anesthetics on differential rotational rate between the surface (in carbon number 2 and its surroundings including the head group) and the hydrocarbon interior (in carbon number 12 and its surroundings) of the outer monolayer of the total lipid fraction liposome extracted from synaptosomal plasma membrane vesicles. The anisotropy (r) values for the hydrocarbon interior and the surface region of the liposome outer monolayer were $0.078{\pm}0.001$ and $0.114{\pm}0.001,$ respectively. This means that the rate of rotational mobility in the hydrocarbon interior is faster than that of the surface region. In a dose-dependent manner, the local anesthetics decreased the anisotropy of 12-AS in the hydrocarbon interior of the liposome outer monolayer but increased the anisotropy of 2-AS in the surface region of the monolayer. These results indicate that local anesthetics have significant disordering effects on the hydrocarbon interior but have significant ordering effects on the surface region of the liposome outer monolayer.

• 자원리싸이클링
• /
• 제20권4호
• /
• pp.52-57
• /
• 2011

본 논문에서는 초음파나 교반 없이 전해질막과 확산층을 분리하기위한 새로운 방법에 대해 연구하였다. 증류수, 부탄올, 계면활성제를 이용하여 연료전지 막전극접합체의 전해질막과 확산층을 침지법으로 촉매입자의 분산 없이 분리하였다. 또한 분리된 확산층의 촉매와 연료전지 Pt/C 촉매를 왕수에서 $80{\sim}85^{\circ}C$로 가열하여 촉매입자를 녹여 침전제를 첨가하였다. 이후 소성하여 백긍 금속을 회수하였고 이는 새로운 연료전지용 전극촉매를 만드는데 사용될 것이다.

• 멤브레인
• /
• 제31권4호
• /
• pp.268-274
• /
• 2021

지구 온난화 이슈에서 가장 고질적인 문제 중 하나는 온실가스의 배출이다. 다양한 온실 가스 중 가장 높은 비중을 차지하는 이산화탄소(CO₂)는 이를 분리하기 위해 연구자들이 지속적으로 연구를 진행해오고 있다. 이러한 관점에서 본 연구에서는 이산화탄소 기체를 분리하기 위해 poly(vinyl alcohol) (PVA) 기반 공중합체를 제조하여 기체 분리막에 활용했다. 공중합체는 자유 라디칼 중합법을 활용했으며, 곁사슬을 위한 단량체로 아크릴산(acrylic acid)를 사용하여 PVA-g-PAA(VAA) 그래프트 공중합체를 제조했다. 본 공중합체를 이산화탄소 기체분리막에 적용한 사례는 최초이며, 폴리설폰 지지체에 복합막 형태로 제조했다. 공중합체 합성 결과는 FT-IR을 통해, 합성한 공중합체 의 거동은 TEM과 DSC, TGA를 통해 분석하였다. AA 그래프팅을 통해 공중합체는 나노 구조를 형성하며, PVA의 결정화도를 급격하게 감소시켜 이산화탄소의 용해도를 증가시켰고, 이는 이산화탄소 기체 분리 성능을 향상시켰다. 이를 통해 이산화탄소 분리막 분야에 용액-확산 및 그래프팅 방법이라는 새로운 접근법을 제시하였다.

• 멤브레인
• /
• 제33권4호
• /
• pp.168-180
• /
• 2023

본 총설은 탄소중립 및 에너지순환을 실현하기 위한 재생에너지로부터 그린수소 생산 전략 중 하나인 바이오수소 생산 및 정제법에 관해 소개하고자 한다. 바이오수소는 생물질과 미생물과 같은 재생에너지원을 이용하며, 상온 및 상압 등의 마일드한 실험조건에서 작동하여 에너지소비 및 공정비용이 적게 드는 친환경 공정으로 알려져 있다. 하지만, 이러한 바이오수소를 상업적으로 이용하기 위해서는 해결해야 할 중요한 도전적인 과제가 존재한다. 특히, 바이오수소는 생물반응기내의 복합한 화학반응으로 합성되어, 낮은 수소생산 속도 및 반응기내 다양한 혼합물이 존재하여, 바이오수소 고순도화를 위해서 연속공정 형태의 분리 및 정제 기술이 반드시 필요하다. 이를 위해, 저온 증류법, 압력 흡착법, 분리막법 등을 비롯한 다양한 분리 및 정제 기술이 고순도 바이오수소를 얻기 위해 제안되었다. 본 총설에서는 바이오수소 생산 및 정제 연계화를 위한 비다공성 고분자 분리막의 가능성에 대해 소개하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 춘계 학술논문 발표대회 산업계
• /
• pp.89-97
• /
• 2009

As landscaping building roofs and concrete structures increase gradually for low carbon green growth policy of government, But waterproofing membranes of those structures are effecting by root penetration of landscape plant. 80, we progressed study about test method for fast evaluating root resistance of waterproofing materials jointly with Tokyo Institute of Technology. The result of the study is as follows: (1) The penetrating load of the needle at the displacement speed of 1mm/min was measured for various membrane to basis and lap joints of membrane, the load force was $3{\sim}50$ N by material variously. (2) According to the test method of deriving rhizomes of bamboo grass to basis and lap joints of membrane, there were no penetrated membrane until present, but need persistent observation. (3) Test method of deriving rhizomes of bamboo grass to basis and lap joints of membrane can shorten from period of 2 years to 1 year for testing. Because rhizomes of bamboo grass can grow from May to September, test is possible in same period.

• 상하수도학회지
• /
• 제31권2호
• /
• pp.169-175
• /
• 2017

This study applied microbubbles to reduce membrane fouling in wastewater reuse membrane processes, evaluated and compared the transmembrane pressure with or without the application of microbubbles and the cleaning efficiency with the application of aeration and microbubbles. In addition, this study analyzed foulants removed from the membrane surface. Changes in the transmembrane pressure of membranes with the presence or absence of microbubbles were observed. As a result, transmembrane pressure (TMP) increasing rate decreased twofold when applying microbubbles to realize stable operations. This study compared and evaluated cleaning efficiency applying aeration and microbubbles. As a result, the cleaning efficiency was 5% higher on average when applying microbubbles. In turbidity and total organic carbon (TOC), foulants were discharged when applying microbubbles twice as much as applying aeration. It is thought that particulate foulants precipitated on the membrane surface were more likely to desorb because the adhesion between the membrane surface and particle was weakened by microbubbles. Therefore, it is considered possible to effectively control membrane fouling because of the increase in cleaning efficiency when applying microbubbles to wastewater reuse membrane processes.

• Fisheries and Aquatic Sciences
• /
• 제11권3호
• /
• pp.149-158
• /
• 2008

Labyrinthulids are unicellular heterotrophic marine microalgae. Two labyrinthulid strains, L4 and L75, which produce generous amounts of polyunsaturated fatty acids(PUFAs), were isolated from leaves floating in the coastal areas of Quang Ninh province, Vietnam, and Fukuoka Prefecture, Japan, respectively. Both strains had spindle-shaped cells surrounded by ectoplasmic networks. Numerous oil bodies were observed in each cell, mostly in the vicinity of cell membranes. When soybean oil or soybean lecithin was used as a carbon source with peptone as a nitrogen source, the proportion of PUFAs reached 25-30% and 50-56% for L4 and L75, respectively. After 14 days of growth at $25^{\circ}C$, L4 produced 0.3 mg PUFAs/g-agar in PYA-SBO medium and 0.6 mg PUFAs/g-agar in PYA-SBL medium. In comparison, L75 produced 0.2 mg PUFAs/g-agar in both types of media. The differences between the two strains included changes in cellular morphology and the capacity for attaching tightly to fibers when cultured in liquid PYA medium containing 2% SBL. In addition, when the strains were grown under the same conditions, L4 had a higher growth rate and produced more PUFAs than L75.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2005년도 춘계 국제심포지엄 및 학술대회
• /
• pp.51-82
• /
• 2005

To compare the pulmonary toxicity between ultrafine colloidal silica particles (UFCSs) and fine colloidal silica particles (FCSs), mice were intratracheally instilled with 3 mg of 14-nm UFCSs and 230-nm FCSs and pathologically examined from 30 mill to 24 hr post-exposure. Histopathologically, lungs exposed to both sizes of particles showed bronchiolar degeneration and necrosis, neutrophilic inflammation in alveoli with alveolar type II cell proliferation and particle-laden alveolar macrophage accumulation. UFCSs, however, induced extensive alveolar hemorrhage compared to FCSs from 30 min onwards. UFCSs also caused more severe bronchiolar epithelial cell necrosis and neutrophil influx in alveoli than FCSs at 12 and 24 hr post-exposure. Laminin positive immunolabellings in basement membranes of bronchioles and alveoli of UFCSs treated animals was weaker than those of FCSs treated animals in all observation times. Electron microscopy demonstrated UFCSs and FCSs on bronchiolar and alveolar wall surface as well as in the cytoplasm of alveolar epithelial cells, alveolar macrophages and neutrophils. Type I alveolar epithelial cell erosion with basement membrane damage in UFCSs treated animals was more severe than those in FCSs treated animals. At 12 and 24 hr post-exposure, bronchiolar epithelia cells in UFCSs treated animals showed more intense vacuolation and necrosis compared to FCSs treated animals. These findings suggest that UFCSs has greater ability to induce lung inflammation and tissue damages than FCSs.

• Membrane and Water Treatment
• /
• 제12권2호
• /
• pp.65-73
• /
• 2021

Sponge ball cleaning can generate an abrasion effect, which leads to an attractive increasing in both permeate flux and membrane rejection. The aim of this study was to investigate the influence of the daily sponge ball cleaning (SBC) on the performance of different UF cross-flow membrane modules integrated with a bioreactor. Two 1"-membrane modules and one 1/2"-membrane module were tested. The parameters measured and controlled are temperature, pH, viscosity, particle size, dissolved organic carbon (DOC), total suspended solids (TSS), and permeate flux. The permeate flux could be improved by 60%, for some modules, after 11 days of daily sponge ball cleaning at a transmembrane pressure of 350 kPa and a flow velocity of 4 m/s. Rejection values of all tested modules were improved by 10%. The highest permeate flux of 195 L/㎡.h was achieved using a 1"-membrane module with the aid of its negatively charged membrane material and the daily sponge ball cleaning. In addition, the enhancement in the permeate flux caused by daily sponge ball cleaning improved the energy specific demand for all tested modules. The negatively charged membrane showed the lowest energy specific demand of 1.31 kWh/㎥ in combination with the highest flux, which is a very competitive result.