• Membrane Journal
• /
• v.33 no.4
• /
• pp.222-232
• /
• 2023

In this study, a hollow fiber support membrane was prepared by a non-solvent induced phase separation (NIPS) method using a polysulfone (PSf). The prepared hollow fiber support membrane was coated with PDMS and Pebax to prepare a hollow fiber composite membrane. The prepared composite membrane was measured for permeance and selectivity for pure CO₂, H₂, O₂ and N₂. Gas separation performance of the module having the highest selectivity (CO₂/H₂) among the prepared composite membrane modules was measured according to the change in stage cut using simulated gas. The composition of the simulated gas used at this time was 70% CO₂ and 30% H₂. In the 1 stage experiment, it was possible to obtain values of about 60% of H₂ concentration and 12% of H₂ recovery. In order to overcome the low H₂ concentration and recovery, 2 stage serial test was performed, and through this, it was possible to achieve 70% H₂ concentration and 70% recovery. Through this, it was possible to derive a separation process configuration for CO₂/H₂ separation.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.4
• /
• pp.17-31
• /
• 2023

Amidst escalating global warming fueled by indiscriminate fossil fuel consumption, concerted efforts are underway worldwide to mitigate atmospheric carbon dioxide (CO₂) levels. Electrochemical CO₂ reduction technology is recognized as a promising and environmentally friendly approach to convert CO₂ into valuable hydrocarbon compounds, deemed essential for achieving carbon neutrality. Copper, among the various materials used as CO₂ reduction electrodes, is known as the sole metal capable of generating C₂₊ compounds. However, low conversion efficiency and selectivity have hindered its widespread commercialization. This review highlights diverse research endeavors to address these challenges. It explores various studies focused on utilizing copper-based electrodes for CO₂ reduction, offering insights into potential solutions for advancing this crucial technology.

• Journal of Hydrogen and New Energy
• /
• v.25 no.6
• /
• pp.586-593
• /
• 2014

Limited sources of fossil fuels and also global climate changes caused by $CO_2$ emissions are currently discussed around the world. As a renewable, carbon neutral and widely available energy source, biogas is regarded as a promising alternative to fossil fuels. In this study, a plasma dump reformer was proposed to produce $H_2$-rich synthesis gas by a model biogas. The three-phase gliding arc plasma and dump combustor were combined. Screening studies were carried out with the parameter of a dump injector flow rate, water feeding flow rate, air ratio, biogas component ratio and input power. As the results, methane conversion rate, carbon dioxide conversion rate, hydrogen selectivity, carbon monoxide yield at the optimum conditions were achieved to 98%, 69%, 42%, 24.7%, respectively.

• Journal of Hydrogen and New Energy
• /
• v.32 no.1
• /
• pp.68-76
• /
• 2021

Climate change problems occur during the use of fossil fuel and the process of biogas production. Research continues to convert carbon dioxide and methane, the major causes of climate change, into high-quality energy sources. in order to present the performance potential for the novel plasma-recuperative burner reformer, the reforming characteristics for each variable were indentified. The optimal operating condition of was an O2/C ratio of 1.0 and a total gas supply of 20 L/min. At this time, CH4 conversion was 64%, H2 selectivity was 39%, and H2/CO ratio was 1.13, which were the results applicable to the solid oxide fuel cell fuel stack for RPG, or Residential Power Generator. Recirculation of reformed gas increases the amount of H2 and CO, which are combustible gases, especially the amount of H2. As a result, the H2 selectivity is improved, and high-quality gas can be produced.

• Clean Technology
• /
• v.22 no.3
• /
• pp.196-202
• /
• 2016

In this study, ceria- based catalysts were prepared for dimethyl carbonate (DMC) synthesis and reaction conditions were evaluated for finding the optimal reaction route. In order to find optimal catalysts for DMC synthesis, calcination temperature and Cu(II) impregnation amount were evaluated. The oxidative carbonylation using methanol, carbon monoxide and oxygen and the direct synthesis using methanol and carbon dioxide were introduced for producing DMC. Following the law of Le Chatelier, the dehydration reaction was applied for enhancing the reactivity (methanol conversion) as removing water during the reaction. 2-cyanopyridine, as a chemical dehydration agent, was used. In the case of the oxidative carbonylation, methanol conversion rate increased from 15.1% to 38.7% and the DMC selectivity increased from 0% to 98.8%. In the case of the direct synthesis, methanol conversion rate increased from 1.0% to 77.8% and the DMC selectivity increased from 41.2% to 100.0%.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.10a
• /
• pp.24-25
• /
• 1994

고분자 분리막을 통한 메탄과 이산화탄소의 분리는 천연가스에서 불순물로 작용하는 이산화탄소를 분리시켜 천연가스의 순도를 향상시키는데 활용할 수 있으며, 바이오가스나 제철소 폐가스로부터의 이산화탄소의 분리, enhanced oil revovery 공정에서의 이산화탄소의 분리, 그리고 지구 온난화의 원인이 되는 대기중의 이산화탄소 농도의 감소등에서 활용될수 있다. 이러한 분리막 공정은 여러 혼합기체에 대해 단순하고 간편하며 에너지 소비가 적다는 장점에 의해 기체분리에 효과적이고 응용성있는 공정으로 대두되고 있는데, 그 중에서도 분리막의 투과도(Permeability)와 선택도(Selectivity)를 동시에 높일수 있는 새로운 막재료의 개발에 관한 연구가 활발히 진행되고 있다. 이를 위해 고분자 구조를 화학적으로 변화시키는데, 이 경우에는 고분자의 구조 변화와 투과특성간의 관계를 밝히는 것이 매우 중요하다.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1103-1105
• /
• 2002

H-ZSM-5 and γ-alumina were treated with formaldehyde and sodium carbonate. The treatment increased the amounts of weak acid sites, removing strong acid sites. The maximum temperature of weak acid sites in their ammonia TPD spectra shifted in the direction of high temperature. The modified H-ZSM-5 and g-alumina were mixed with the methanol synthesis catalyst to perform dimethyl ether synthesis from syn-gas. The modified catalysts showed better selectivity to dimethyl ether, minimizing the reforming reaction to carbon dioxide. The maximum yield of 53.3% to dimethyl ether was achieved under the reaction conditions of 54.4 atm, 523 K, and the feed rate of 4500 Lhr-1 .gcat-1.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.07a
• /
• pp.87-89
• /
• 2003

Thermoplastic polyurethane(PU)-based blend membranes were prepared by the solvent evaporation process. The gas sorption, diffusion, and permeation properties of PU-based blend membranes have been studied. The morphology of PU-based blend membranes was investigated by SEM. The result showed that phase separation occurred with increasing blend ratio. $CO_2$ permeation behaviors of blend membranes were affect by blend composition. Thermoplastic polyurethane(PU)-based membranes showed high $CO_2$ permeation and $CO_2$/$N_2$ selectivity of the blend membrane was improved with increasing the blend ratio.

• Clean Technology
• /
• v.19 no.1
• /
• pp.65-72
• /
• 2013

In this study, we investigated the activity of Pd and Cu co-incorporated on mesoporous silica support such as MCM-41 and SBA-15 for catalytic nitrate reduction in water. In pure hydrogen flow, nitrate concentration was gradually decreased with the reaction time, but nitrogen selectivity was too low due to very high pH of reaction medium after the reaction. In order to acquire high nitrogen selectivity, we utilized carbon dioxide as a pH buffer, which resulted in higher nitrogen selectivity (about 40%). For the above reaction conditions, Pd-Cu/MCM-41 showed better performance than Pd-Cu/SBA-15. The physicochemical properties of both catalysts were investigated to figure out the relationship between the characteristics of the catalysts and the catalytic activity on the catalytic nitrate reduction by $N_2$ adsoprtion-desorption, X-ray diffraction (XRD), $H_2$-temperature programmed reduction, X-ray photoelectron spectroscopy (XPS) techniques.

• Journal of Hydrogen and New Energy
• /
• v.30 no.1
• /
• pp.14-20
• /
• 2019

The power to gas (P2G) is one of the energy storage technologies that can increase the storage period and storage capacity compared to the existing battery type. One of P2G technologies produces hydrogen by decomposing water from renewable energy (electricity) and the other produces $CH_4$ by reacting hydrogen with $CO_2$. The objective of this study is the reaction of $CO_2$ methanation which synthesized methane by reacting carbon dioxide and hydrogen. The effect of $CO_2$ conversion and $CH_4$ selectivity on reaction temperature, pressure, and methane contents over 40% Ni catalyst was mainly investigated throughout this study. As a result, the activity of this catalyst appeared to be the highest in $CH_4$ yield at around $400^{\circ}C$ and the selectivity of $CH_4$ increased with increasing reaction pressure. The methane content was not significantly influenced below 3% of all componets. As the space velocity increases from 10,000 to 30,000/hr, the $CO_2$ conversion rate tends to decrease.