• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.265-270
• /
• 2006

This paper reports an improved headspace gas chromatographic method for the determination of carboxyl group content in wood fibers. Pretreatment of wood fibers was applied using dilute HCl to convert carboxyl groups to carboxylic acid groups and then using deionized water to wash fiber samples thoroughly. The samples were finally air dried. Sodium bicarbonate solution was used to react with carboxylic acid groups of the pretreated fibers in a closed testing vial to release carbon dioxide. The content of carboxyl groups in fibers was accurately quantified by determining the amount of carbon dioxide released by a headspace gas chromatograph equipped with a thermal conductivity detector. The modified process for fiber sample pretreatment increased the reliability and accuracy in measuring carboxylic acid groups. The present method is simple, accurate.

• Journal of the Korean Ceramic Society
• /
• v.45 no.4
• /
• pp.196-203
• /
• 2008

Metal-carbon/$TiO_2$ composite photocatalysts were thermally synthesized through the mixing of anatase to metal(Cu, Zn) containing phenol resin in an ethanol solvent coagulation method. The BET surface area increases, with the increase depending on the amount of metal salt used. From SEM images, metal components and carbon derived from phenol resin that contains metal was homogeneously distributed to composite particles with porosity. XRD patterns revealed that metal and titanium dioxide phase can be identified for metal-carbon/$TiO_2$ composites, however, the diffraction peaks of carbon were not observed due to the low carbon content on the $TiO_2$ surfaces and due to the low crystallinity of the amorphous carbon. The results of a chemical elemental analysis of the metal-carbon/$TiO_2$ composites showed that most of the spectra for these samples gave stronger peaks for C, O, treated metal components and Ti metal compared to that of any other elements. According to photocatalytic results, the MB degradation can be attributed to the three types of synergetic effect: photocatalysis, adsorptivity and electron transfer, according to the light absorption between the supporter $TiO_2$, metal species, and carbon layers.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.8
• /
• pp.1166-1168
• /
• 2002

• Clean Technology
• /
• v.14 no.4
• /
• pp.248-255
• /
• 2008

The volume expansion of three ionic liquids (ILs) in the presence of supercritical carbon dioxide has been measured at pressures up to 32 MPa and at temperatures from 313.15 to 333.15 K in a high-pressure view cell. The imidazolium-derivative ionic liquids 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][$PF_6$]), 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][$BF_4$]), and 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][$BF_4$]) were employed in this research. The effects of pressure, temperature, nature of anion and cation as well as the water content on the volume expansion of ILs by absorbing $CO_2$ were investigated experimentally. The volume expansion was higher for the ILs with longer cationic alkyl group and for the ILs with lower anion polarity. The lower the water content, the lower the temperature, or the higher the pressure, the higher was the expansion of IL phase.

• Resources Recycling
• /
• v.26 no.6
• /
• pp.38-44
• /
• 2017

As by-pass dust (BPD) made from cement manufactured process is designated waste, it is required to bury as high cost. The main component of BPD is potassium chloride (KCl), and used for the fertilizer. For using KCl to the fertilizer, the pH value of KCl is required as neutral or weak acid. However, it is not suitable to apply BPD into the fertilizer directly without any other treatment because BPD's pH value is shown 12.0~12.5; a high base. In this study, the carbon dioxide ($CO_2$) was used for removing calcium oxide (CaO) and reducing pH value during manufacturing process of KCl. We fixed inner condition of the carbon test chamber as $25^{\circ}C$-50RH%, and retained 0~7 hours under the 20 vol% of $CO_2$ atmosphere. After experiment, we analyzed the content of CaO and pH value from each samples. The more time exposed to $CO_2$, the content of CaO and pH value are shown. Furthermore, pH value exposed in 6 hours nearly reached 7.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.2
• /
• pp.217-222
• /
• 1999

A squid viscera oil contains a high content of EPA, DHA, and other valuable polyunsaturated fatty acids. The extractions of squid viscera oil by supercritical carbon dioxide both with/without $3\%$ (v/v) ethanol were performed in a semicontinuous flow extractor at 8.3 to 13.8 MPa and 25 to $50^{\circ}C$. When ethanol was added to $SC-CO_2$, the extraction ratio of lipid increased. The extracts contained high content of unsaturated oils like DHA and EPA. The highest extraction yield of lipid from squid viscera oil extracted by supercritical carbon dioxide was obtained at 12.4 MPa and $40^{\circ}C$ with/without entrainer. The main fatty acids of squid viscera oil extracted by supercritical carbon dioxide were myristric acid (14:0), palmitic acid (16:0), palmitoleic acid (16:1), oleic acid (18:1), arachidic acid (20:0), eicosapentaenoic acid (20:5), and docosahaxaenoic acid (22:6).

• KSBB Journal
• /
• v.20 no.5 s.94
• /
• pp.383-386
• /
• 2005

Grape seed oil made by press or organic solvent extraction does not contain resveratrol, a bioactive compound. Supercritical carbon dioxide could extract oil containing resveratrol from grape seed. The extraction efficiency was mainly dependent on the water content in grape seed. More resveratrol was contained in the oil extracted with un-dried grape seed. No resveratrol was extracted with dried grape seed. Time course changes of grape seed oil extraction also resulted that resveratrol could be extracted by supercritical carbon dioxide with the positive influence of water.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.404-410
• /
• 2008

In order to obtain 'value added products' from polypropylene (PP)/waste ground rubber tire powder (WGRT) composites, PP/WGRT microcellular foams were prepared via supercritical carbon dioxide. The effects of blend composition and processing condition on the cell size, cell density and relative density of PP/WGRT micro-cellular composites were studied. The results indicated that the microcellular structure was dependent on blend composition and processing condition. An increased content of waste ground rubber tire powder (WGRT) and maleic anhydride-grafted styrene-ethylene-butylene-styrene (SEBS-g-MA) reduced the cell size, and raised the cell density and relative density, whereas a higher saturation pressure increased the cell size, and reduced the cell density and relative density. With increasing saturation temperature, the cell size increased and the relative density decreased, whereas the cell density initially increased and then decreased.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1008-1014
• /
• 2012

The amount of domestic carbon dioxide emissions is more than 600 million tons/year. The emitted $CO_2$ should be captured and stored, however, suitable storage sites have not been found yet. A lot of researches on the conversion of captured carbon dioxide to useful carbon source have been conducted. The purpose of this study is to convert stable carbon dioxide to useful resources using less energy. For this purpose reducing gas and metallic oxide (activator) are required. Hydrogen was used as reducing gas and cobalt ferrite was used as activator. Considering that activator has different physical properties depending on synthesis methods, activator was prepared by hydrothermal synthesis and solid method. Decomposition characteristics of carbon dioxide were investigated using synthesized powders. Temperature programmed reduction/oxidation (TPR/TPO) and thermogravimetric analyzer (TGA) device were used to observe the decomposition characteristics of carbon dioxide. Activator prepared by solid method with 5 and 10 wt% CoO content showed an excellent performance. In TGA experiments with samples prepared by the solid method, reduction by hydrogen was 29.0 wt% and oxidation by $CO_2$ was highest in 27.5 wt%. 95% of adsorbed $CO_2$ was decomposed with excellent oxidation-reduction behaviors.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.2
• /
• pp.1-9
• /
• 2009

Due to the increase of carbon dioxide in the atmosphere and global warming, the importance of forest ecosystems, as a place of carbon accumulation and emission, has received a great amount of recognition lately. This study was performed to help understand and provide the current status of carbon cycle in the pinus densiflora stand, Korea. The samples were collected from average 35-years-old Pinus densifiora rands in Gongju, Youngdong, Chungsan, Muju, Mupung, and Jangsu regions. Total thirty aboveground sample trees were cut, and ten roots were sampled, and soil samples were collected. Average carbon concentrations in foliage, branch, stem bark, stem wood, and root were 55.7%, 56.0%, 56.0%, 57.3%, and 56.5%, respectively. Carbon content was estimated by the model $Wt=aD^b$ where Wt is oven-dry weight in kg and D is DBH in cm. Total carbon content (aboveground and root) was 42.39tonC/ha in the Pinus densiflora stand. The proportion of each tree component to total carbon content was high in order of stemwood, root, branch, stem bark, and foliage. Total net primary production (aboveground and root) was estimated at 6.51tonC/ha/yr in Pinus densiflora stand. The proportion of each tree component to total net primary carbon content was high in order of sternwood, root, branch, foliage and stembark. Soil carbon contents in the study sites was 43.51tonC/ha at 0-50cm soil depth.