• 한국기계가공학회지
• /
• 제13권6호
• /
• pp.119-126
• /
• 2014

Micro-holes of conductive ceramic are required in micro structures. Micro-electrical discharge machining (Micro-EDM) is an effective machining method since EDM is as process for shaping hard metals and complex-shaped holes by spark erosion in all kinds of electro-conductive materials. However, as the depth of micro hole increases, the machining condition becomes more unstable due to inefficient removal of debris between the electrode and the workpiece. In this paper, micro-EDM was performed to evaluate machining characteristic such as electrode wear, machining time, taper angle, radial clearance with varying voltage and ultrasonic vibration on 10 vol.% Carbon-nanotube reinforced conductive $Al_2O_3$ composite fabricated by spark plasma sintering in previous research.

• Archives of Pharmacal Research
• /
• 제25권6호
• /
• pp.889-894
• /
• 2002

Acharan sulfate (AS) is a glycosaminoglycan (GAG) prepared from the giant African snail, Achatina fulica. In this study, some biological activities of AS were evaluated on the basis of structural similarities to heparin/heparan sulfate and the biological functions of GAGs. We demonstrated that it exhibited strong immunostimulating activities as measured by carbon clearance test in mice and in vivo phagocytosis. It also exhibited a significant hypoglycemic activity in epinephrine (EP)-induced hyperglycemia as well as antifatigue effects by weight-loaded forced swimming test. And it showed hypolipidemic activities in cholesterol-rich mixture induced hyperlipidemia in rats. The above results indicate that AS has diverse biological activities and suggest therapeutically important target molecules.

• Tribology and Lubricants
• /
• 제6권1호
• /
• pp.82-88
• /
• 1990

마찰학적인 관점에서 피복초경공구의 피복층이 공구마멸에 미치는 영향을 조사하기 위하여 공구표면의 피복층을 선택적으로 제거한 후 마멸시험, 급속정지 실험 및 절삭력 측정 실험을 수행하였다. 실험 결과 피복층은 공구와 피삭재 사이의 점착성을 낮추어 점착마멸을 억제시키는 것으로 나타났으며, 마찰저항을 감소시켜 절삭력을 낮추는 것으로 관찰되었다. 또한 경사면상의 피복층이 플랭크 마멸의 성장을 저지하는 효과가 있는 것으로 나타났으며, 피삭재가 탄소강인 경우 경계마멸까지 고려할 때 다중피복공구가 가장 바람직한 것으로 관찰되었다.

• 소성∙가공
• /
• 제7권5호
• /
• pp.439-444
• /
• 1998

Recently many automotive parts have been made with stainless steels by deep drawing processes, But there are various problems occurred in deep drawing works of stainless steels compared with low carbon steels. For the severe deep drawing of complex cylindrical housing optimum process planning is required to eliminate intermediate annealing improve shape accuracy and maintain surface integrity without drawing defects such as tears wrinkles and scratches or galling. Therefore in this study a sample process planning of the severe of the severe deep drawing process is applied to a complex cylindrical housing needed for a 6 multi-stepped deep drawing of type STS 305 . A series of experiments are performed to investigate optimum process variables such as drawing rate radius and clearance. Through experiments the variations of the thickness strain distribution and hardness distribution in each drawing step are observed. Also the effects of other factors on formability such as drawing oil, blank holding force and die geometry are examined and discussed.

• 생약학회지
• /
• 제25권3호
• /
• pp.233-237
• /
• 1994

Bacillus P-92 which fermented antler was isolated from intestinal bacteria. The biological activites, carbon clearance and growth activity of lactic acid bacteria, of fermented antler was better than those of untreated antler. The enyzmes activities, ${\beta}-glucosidase,\;{\beta}-glucuronidase$ and tryptophanase, of intestinal bacteria of mice treated with fermented antler were lower than those of mice treated with untreated antler, although those of mice treated with fermented antler or untreated antler were higher than those of control. Biological activity of the antler seems to be increased by fermentation.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.228-236
• /
• 2002

In this study, the carbon steels, SM20C were machined with the tungsten carbide tipped circular saw to clarify the cutting-off characteristics in terms of tool wear. The results show that an improved performance in view of both the tool wear and the cutting efficiency was obtained by using oil base cutting fluid at the cutting speed of 100m/min with the feed of 0.06mm/tooth. The rake angle of 10$^{\circ}$ , clearance angle of 8$^{\circ}$ , nose radius of R0.1mm, and end cutting edge champer of 0.1mm$\times$25$^{\circ}$ are believed as the best tool geometries. The tool wear decreases due to using the saw of the disk of STS5 and the tool material of P30.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.48-55
• /
• 1994

In this experiment, to find optimum brazing conditions for Cu/Stainless Steel brazing using filler metals of Ag-Cu-Zn-Cd system, first of all spreading ratio was tested on 304 stainless Steel and low carbon steel. And then shear test of brazed joint was executed. As the result of that, the shear strengths of brazed joints were the range of 60-90 MPa. Through microstructure analysis for brazed interface layer, We found as follows. Firstly interface layer increased as time increased. Secondly continuous layer of Ag-Cd compound was observed along the side of stainless steel. Also by means of EDS analysis for fracture surface, ductile fracture was occurred and precipitates on the fracture surface were found to include Cr, Mn, Si in Ag-rich phase.

• Toxicological Research
• /
• 제4권2호
• /
• pp.151-158
• /
• 1988

Experiments were undertaken to evaluate the effects of brazilin and hematoxylin on immune functions in normal young mice. Brazilin and hematoxylin decreased the circulating leucocyte counts. Brazilin and hematoxylin decreased the cirulating leucocyte counts. Both compounds did not produce a significant change of immunoorgan weights in comparison with those in the control group. Brazilin decreased significantly IgM plaque forming cells. Brazilin and hematoxylin decreased significantly Arthus reaction at 3 hours-post challenge with respect to aggregated bovine serum albumin.

• 혜화의학회지
• /
• 제9권2호
• /
• pp.123-134
• /
• 2001

In order to investigate the effect of Mori Folium on immunologic control function, the various immune responses were studied. The results were obtained as follows : 1. The transformation of lymphocyte was increased significantly in all concentration of Mori Folium treated group as compared with negative and positive control. 2. In FACS analysis, the population of helper T cell and T cell were increased significantly in Mori Folium treated group as compared with control. 3. IL-12(p35) and INF-${\gamma}$ were upregulated in Mori Folium treated group 4. NO and carbon clearance were significantly increased in Mori Folium treated group as compared with control. 5. The hemagglutinin titer and hemolysin titer were increased but insignificantly in Mori Folium treated group as compared with control.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.940-946
• /
• 2015

선삭작업에서 가공 여유각 변경은 가공특성을 변화시킨다. 본 연구에서는 피삭재로 기계구조용탄소강, 크롬믈리브텐강, 스테인리스강을 선택하여 정해진 가공조건으로 재질들의 특색이 어떻게 변화하는지 나타내었다. 피삭재의 재질별 표면거칠기를 알아보기 위하여 촉침식 표면 거칠기 측정기로 측정한 결과 인장강도가 높은 피삭재가 표면거칠기 값이 좋게 나왔다. 또한, 가공 이송속도 0.07 mm/rev와 0.10 mm/rev를 비교하였을 경우, 0.07mm/rev일 때가 재질과 관계없이 표면거칠기가 매우 좋게 나타났다. 선삭 여유각 변경에 따른 표면거칠기를 종합하여 분석하여 보면 3가지 재질 모두 $0.9^{\circ}$일 때 가장 좋은 거칠기 값을 보였으며 $0.3^{\circ}$일 때 가장 나쁜 거칠기 값을 보였다.