• Carbon letters
• /
• v.26
• /
• pp.11-17
• /
• 2018

Milled carbon fiber (mCF) was prepared by a ball milling process, and X-ray diffraction (XRD) diffractograms were obtained by a $2{\theta}$ continuous scanning analysis to study mCF crystallinity as a function of milling time. The raw material for the mCF was polyacrylonitrile-based carbon fiber (T700). As the milling time increased, the mean particle size of the mCF consistently decreased, reaching $1.826{\mu}m$ at a milling time of 18 h. The XRD analysis showed that, as the milling time increased, the fraction of the crystalline carbon decreased, while the fraction of the amorphous carbon increased. The (002) peak became asymmetric before and after milling as the left side of the peak showed an increasingly gentle slope. For analysis, the asymmetric (002) peak was deconvoluted into two peaks, less-developed crystalline carbon (LDCC) and more-developed crystalline carbon. In both peaks, Lc decreased and $d_{002}$ increased, but no significant change was observed after 6 h of milling time. In addition, the fraction of LDCC increased. As the milling continued, the mCF became more amorphous, possibly due to damage to the crystal lattices by the milling.

• Carbon letters
• /
• v.4 no.4
• /
• pp.185-191
• /
• 2003

Two types of carbon fiber based high modulus- and isotropic-pitch were exposed to isothermal oxidation in air and $CO_2$ gas and the weight change was measured by TGA apparatus. The kinetic equation was introduced $f=1-{\exp}(-at^b)$ and the constant b was obtained in the range of 1.02~1.68 for the isotropic fiber and obtained 0.91~1.93 for the high modulus fiber respectively. In considering the effect of the atmosphere for isothermal oxidation, the value of the constant b obtained in the carbon dioxide was higher than that obtained in the air. Therefore, it was found that the pitch based carbon fiber shows sigmoidal characteristic when it is oxidized in the carbon dioxide. In addition, it was also found that $k_f = 0.5$, which was reaction constant at f = 0.5, was a very useful parameter for evaluation of the oxidation reactivity of pitch based carbon fibers. According to the consideration, it is suggested that the conversion-time curves of the pitch based carbon fibers are correlated by normalized equation $f=1-{\exp}(-A{\tau}^B)$, where ${\tau}=t/t_f= 0.5$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1314-1319
• /
• 2011

This study was carried out to investigate the surface soil organic carbon fractions affecting by different land use types, including needle-leaf forest (FN), broad-leaf forest (FB), pasture, annual upland cropping land (upland), and paddy rice land (paddy). We chose seven regions across Korean inland, considering sea level altitude, and measured soil organic carbon content and physico-chemical properties such as bulk density at a depth of 0~15 cm using core samples in April for the each land use type. In addition, labile organic carbon fractions in soil including light fraction and hot water extractable carbon were investigated. From this study, organic carbon storage (Mg C per ha) in the upper 15-cm soils was highest in FB (37.8), and decreased in the order of pasture (29.1), FN (28.8), paddy (21.9), and upland crop (19.9). In forest, more than 20% of soil organic carbon existed as light fraction, the free organic matter. Hot-water extractable carbon contents of soils in five land use types were lower than 7% of their soil organic carbon content.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.2
• /
• pp.110-118
• /
• 1995

The effect of reductants (Ti, Si, Al, Mn, Fe) addition into molten Borax has been studied on oxidation resistance and the growth of boronized layer formed during electro-boronizing on the substrate such as carbon steel and STS 430. Experiments have been carried out at the current density of 0.5 A/$\cm^2$ and in temperature range of 600~$1000^{\circ}C$ for 1~5 hours. The penetrated depth of the boron increased with addition of reductants (Ti, Si, Al) and decreased with addition of Mn and Fe. But excessive addition of reductants inhibited the boronizing due to an increase in viscosity of electrolyte. Oxidation resistance of the boronized carbon steel was improved but that of the boronized STS 430 decreased.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.6
• /
• pp.712-714
• /
• 1999

The rate constants for the nucleophilic addition of potassium cyanide to α,N-diphenylnitrone and its derivatives (p-OCH3, p-CH3, p-Cl, and p-NO2) were determined by ultraviolet spectrophotometer at 25℃, and the rate equations which can be applied over a wide pH range were obtained. On the basis of pH-rate profile, adduct analysis, general base catalysis and substituent effect, a plausible mechanism of this addition reaction was proposed: At high pH, the cyanide ion to carbon-nitrogen double bond was rate controlling, however, in acidic media, the reaction proceeded by the addition of hydrogen cyanide molecule to carbon-nitrogen double bond after protonation at oxygen of a,N-diphenylnitrone. In the range of neutral pH, these two reactions occured competitively.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.182-188
• /
• 2012

In this study we analyzed carbon emissions of leaves of a Pinus densiflora which is vulnerable to a forest fire using the cone calorimeter in order to analyze greenhouse gas emissions from forest fires depending on region and altitude. Fuels were collected from 9 regions[Hongcheon(Gangwon-do), Chungsong(Gyeongbuk-do), Yanhpyeong (Gyeonggi-do), Jecheon(Chungchongbuk-do), Gongju(Chungcheongnam-do), Wuju(Jeollabuk-do), Youngam(Jeollanam-do), Busan and Jeju-do)] and 9 altitudes(80 m, 450 m, 900 m, 1000 m, 1100 m, 1200 m, 1300 m, 1400 m and 1500 m) and then, carbon dioxide and carbon monoxide emissions contained in a weight of 50 g of fuel were analyzed. According to the results, there were differences in carbon emissions by regional groups, as the average carbon dioxide and carbon monoxide emissions in 9 regions were nearly 43.5929 g to 52.8868 g, and 0.8842 g to 3.6422 g, respectively. Busan and Jecheon had relatively higher carbon dioxide emissions and especially, Busan had 1.23 times higher carbon dioxide emissions than Jeju-do. Also, Gongju, Chungcheongnamo Province and Busan had relatively higher carbon monoxide emissions and especially, Gongju and Pusan had relatively higher carbon monoxide emissions and especially, Gongju had 4.12 higher carbon monoxide emissions than Hongcheon. In addition, there were differences in carbon emissions too depending on altitude, since carbon dioxide and carbon monoxide emissions in 9 altitudes were respectively, 40.7015 g to 68.9297 g and 1.3923 g to 12.2918 g. At the altitude of 80m, carbon dioxide and carbon monoxide emissions were respectively, 68.9297 g and 12.2918 g, and at the altitude of 450m, carbon dioxide and carbon monoxide emissions were respectively, 65.5115 g and 11.2497 g. These results show that pine trees at the lower altitude discharge relatively more carbon. It is considered that this analysis on carbon emissions depending on region and altitude can be effectively used for predicting greenhouse gas emissions and establishing statistical data from forest fires in each region and altitude.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.6
• /
• pp.441-448
• /
• 2000

Experimental work was carried out on nitrogen and phosphorus removal from real wastewater using a bench-scale SBR process. The phosphorus removal was stable and the phosphorus concentration remaining in the reactor was maintained within 1.5ppm, regardless of the addition of an external carbon source. In the case of nitrogen, an external carbon source was necessary for denitrification. The effect on denitrification with the addition of various carbon sources, such as glucose, methanol, acetate, and propionate, was also investigated. Acetate was found to be the most effective among those tested in this study. When 100ppm (theoretical oxygen demand) of sodium acetate was added, the average rate of denitrifiaction was 2.73mg NO$_3$-N (g MLSS)(sup)-1 h(sup)-1, which was ca. 4 times higher than that with the addition of 200 ppm of methanol. The phosphorus and nitrogen concentrations were both maintained within 1.5ppm by the addition of an appropriate amount of a carbon source during a long-term operation of the SBR. The mathematical modeling was performed using Monod kinetics, other microbial kinetics, mass balances, and stoichiometry. The modeling was found to be useful for predicting the SBR operation and optimizing the HRT.

• Journal of the Korean Society for Heat Treatment
• /
• v.11 no.2
• /
• pp.140-149
• /
• 1998

The graphitization is affected by the addition of small amount of the elements, such as Si, Al, Ni, B, Cr and Mn etc. Boron is well known as the most effective element for the graphitization of cementite in high carbon steels. But a study on quantitative analysis of B effect on the graphitization is few reported. Therefore the effect of boron addition in Fe-0.65%C-1.0%Si-0.5%Mn steels on the graphitization is investigated quantitatively using hardness tester, optical microscope and scanning electron microscope, neutron induced microscopic radiography. The graphitization in high carbon steels is promoted with 0.003~0.005%B addition. But the graphitization in steels which has no boron takes long holding time at $680{\sim}720^{\circ}C$. The hardness of quenched steel containing 0.003%B is higher than that of 0.005%B added steel due to complete dissolution of fine graphites into the austenite. The 0.003%B added high carbon steel graphitized at $680^{\circ}C$ for 25hr is useful steel for the agricultural implements and automobile parts which needed a good formability and high hardness.

• Animal cells and systems
• /
• v.10 no.4
• /
• pp.191-196
• /
• 2006

This study was carried out to evaluate soil carbon cycling of a 36-year-old larch (Larix leptolepis) stand in Korea. The aboveground and soil organic carbon storage, litterfall, and soil respiration rates were measured over twoyear periods. The estimated aboveground biomass carbon storage and increment were 4220 gC $m^{-2}$ and 150 gC $m^{-2}\;yr^{-1}$, respectively. Mean organic carbon inputs by needle and total litterfall were 118 gC $m^{-2}\;yr^{-1}$ and 168 gC $m^{-2}\;yr^{-1}$, respectively. The aboveground carbon increment of the stand was similar to the annual input of carbon from total litterfall. The soil respiration rates correlated exponentially with the soil temperature at a depth of 20 cm ($R^2$ = 0.86). In addition, the exponential regression equation indicated a relatively strong positive relationship between the soil respiration rates and soil temperature, while there was no significant relationship between the soil respiration rates and the soil moisture content. The annual mean and total soil respiration rates were 0.40 g $CO_2\;m^{-2} h^{-1}$ and 3010 g $CO_2\;m^{-2}\;yr^{-1}$ over the two-year study period, respectively.

• Journal of the Korean Ceramic Society
• /
• v.47 no.5
• /
• pp.433-438
• /
• 2010

Fe-carbon/$TiO_2$ composites were prepared by a sol-gel method using AC, ACF, CNT and $C_{60}$ as carbon precursors and were characterized by means of BET surface area, X-ray diffraction (XRD), scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX). The activity of the prepared photocatalysts was investigated by degradation reaction of methylene blue (MB) irradiated with UV lamp. Effects of different carbon sources and irradiation time on photocatalytic activity were also investigated. The results showed that the photocatalytic activity of the Fe-carbon/$TiO_2$ composites was much higher than that of pristine $TiO_2$ and Fe/$TiO_2$ composites. The prominent photocatalytic activity of Fecarbon/$TiO_2$ composites could be attributed to both the effects of photo-adsorption and electron transfer by carbon substrate. In addition, the higher photocatalytic activity of Fe-carbon/$TiO_2$ composites can be compared with that of carbon/$TiO_2$ and Fe /$TiO_2$ composites due to cooperative effects between Fe and carbon.