• Title/Summary/Keyword: capability of removing

Search Result 68, Processing Time 0.024 seconds

De-Noising of HRRP Using EMD for Improvement of Target Identification Performance (표적 식별 성능 향상을 위한 EMD를 이용한 HRRP의 잡음 제거 기법)

  • Park, Joon-Yong;Lee, Seung-Jae;Yang, Eunjung;Kim, Kyung-Tae
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.28 no.4
    • /
    • pp.328-335
    • /
    • 2017
  • In this paper, we propose an efficient method to remove noise component contained in high resolution range profile(HRRP) to improve target identification performance. The proposed method can effectively eliminate the noise component using both the statistical characteristics of the noise component and EMD algorithm. Experimental results show that the proposed method can substantially improve the identification capability, removing the noise component effectively.

A Study on the Optimum Release Time Determination of Developing Software Considering Imperfect Debugging (불완전 디버깅을 고려한 개발 소프트웨어의 최적 인도 시기 결정 방법에 관한 연구)

  • Che Gyu Shik
    • The Transactions of the Korean Institute of Electrical Engineers D
    • /
    • v.54 no.6
    • /
    • pp.396-402
    • /
    • 2005
  • The software reliability growth model(SRGM) has been developed in order to evaluate such measures as remaining fault number, fault rate, and reliability for the developing stage software. Most of the study literatures assumed that this detecting efficiency was perfect. However the actual fault detecting is generally imperfect, and widely known to many persons. It is not easy to develop and remove the fault existing in the software because the fault finding is difficult, and the exact solving method also not easy, and new fault may be introduced depending on the tester's capability. There, the fault removing efficiency influences the software reliability growth or developing cost of software. It is a very useful measure throughout the developing stage, much helpful for the developer to evaluate the debugging efficiency, and evaluate additional workload. Hence, the study for the imperfect debugging is important in point of software reliability and cost. This paper proposes that the fault debugging is imperfect and new fault may be introduced for the developing software during the developing stage.

Novel Method for Face Recognition using Laplacian of Gaussian Mask with Local Contour Pattern

  • Jeon, Tae-jun;Jang, Kyeong-uk;Lee, Seung-ho
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.10 no.11
    • /
    • pp.5605-5623
    • /
    • 2016
  • We propose a face recognition method that utilizes the LCP face descriptor. The proposed method applies a LoG mask to extract a face contour response, and employs the LCP algorithm to produce a binary pattern representation that ensures high recognition performance even under the changes in illumination, noise, and aging. The proposed LCP algorithm produces excellent noise reduction and efficiency in removing unnecessary information from the face by extracting a face contour response using the LoG mask, whose behavior is similar to the human eye. Majority of reported algorithms search for face contour response information. On the other hand, our proposed LCP algorithm produces results expressing major facial information by applying the threshold to the search area with only 8 bits. However, the LCP algorithm produces results that express major facial information with only 8-bits by applying a threshold value to the search area. Therefore, compared to previous approaches, the LCP algorithm maintains a consistent accuracy under varying circumstances, and produces a high face recognition rate with a relatively small feature vector. The test results indicate that the LCP algorithm produces a higher facial recognition rate than the rate of human visual's recognition capability, and outperforms the existing methods.

A Signal Detection of Minimum Variance Algorithm on Linear Constraints

  • Kwan Hyeong Lee
    • International Journal of Internet, Broadcasting and Communication
    • /
    • v.15 no.3
    • /
    • pp.8-13
    • /
    • 2023
  • We propose a method for removing interference and noise to estimate target information. In wireless channels, information signals are subject to interference and noise, making it is difficult to accurately estimate the desired signal. To estimate the desired information signal, it is essential to remove the noise and interference from the received signal, extracting only the desired signal. If the received signal noise and interference are not removed, the estimated information signal will have a large error in distance and direction, and the exact location of the target cannot be estimated. This study aims to accurately estimate the desired target in space. The objective is to achieve more presice target estimation than existing methods and enhance target resolution.An estimation method is proposed to improve the accuracy of target estimation. The proposed target estimation method obtains optimal weights using linear constraints and the minimum variance method. Through simulation, the performance of the proposed method and the existing method is analyzed. The proposed method successfully estimated all four targets, while the existing method only estimated two targets. The results show that the proposed method has better resolutiopn and superior estimation capability than the existing method.

An Interference Canceller-based Digital On-Channel Repeater to Improve Feedback Channel Estimation and RFP Performance (귀환 채널 추정 및 RFP 성능을 개선한 간섭 제거 기반의 동일 채널 중계기)

  • Choi, Soocheol;Cho, Kiryang
    • Journal of Broadcast Engineering
    • /
    • v.21 no.2
    • /
    • pp.261-267
    • /
    • 2016
  • In this paper, Method for the phase distortion compensation timing offset and DC eliminator for the pilot component estimation and removal, transmitted and received signal correlation in the delay scheme DAB interference cancellation based on the same channel for using for estimating the feedback signal based on a between for removal for the timing offset compensation It proposes a repeater. This was applied to the ATSC system. The on-channel repeater of the proposed interference cancellation based on the interference removing capability is improved in interference signal is 20dB greater than the primary transmission signal environment via the return channel estimation and improve performance RFP. Accordingly, it was confirmed by simulation that good signal is sent out with the improvement of the ability of the repeater.

A Study on Compressive Strength of Carbon/epoxy Composite Structure Repaired with Bonded Patches after Impact Damage (충격 손상된 카본/에폭시 복합재 구조의 패치 접착 보수 방안 적용 후 압축 강도 특성 평가)

  • Kong, Chang-Duk;Park, Hyun-Bum;Lim, Sung-Jin;Shin, Chul-Jin
    • Composites Research
    • /
    • v.23 no.5
    • /
    • pp.15-21
    • /
    • 2010
  • In this study, repair and maintenance schemes of the damaged composite structure was investigated, and a repair process of the carbon/epoxy laminate composite structure was investigated numerically and experimentally. The composite laminates were damaged by drop weight type impact test machine. The damaged composite structure was repaired using external patch repair method after removing damaged area. The compressive strength test and analysis results after repairing the impact damaged specimens were compared with the compressive strength test and analysis results of undamaged specimens and impact damaged specimens. Finally, the strength recovery capability by repairing were investigated.

An Experimental Study on the Capability of Arresting the Spread of a Fire of Fireproof Fabric Equipped over Ceiling Board of Wooden Cultural Properties (목조문화재 개판 상부에 설치하는 방염천의 화재전파 차단기능에 대한 실험연구)

  • Kim, Hyunju;Roh, Sam-Kew;Kim, Dong Cheol;Ham, Eun-Gu
    • Journal of the Society of Disaster Information
    • /
    • v.8 no.3
    • /
    • pp.297-303
    • /
    • 2012
  • This study examines the isolation-heat performance of fire proof fabric that is equipped over ceiling board in order to secure the capability of arresting the spread of a fire at roof 'Jucsim' structure of Wooden Cultural Properties. For this examination, I conduct experiments with the model and compare two construction methods of fire proof fabric, or flat-type, folding-type. The experiments show the following results. In case of installing the fire proof fabric in flat-type, when the temperature under the ceiling board is $750^{\circ}C$, the temperatures over the ceiling board is $50^{\circ}C$; the difference is $700^{\circ}C$. Compared with the case of removing fire proof fabric, the temperature over the ceiling board is lower by approximately $580^{\circ}C{\sim}600^{\circ}C$. Therefore it can be said that the construction of fire proof fabric enhances the isolation-heat performance. In case of installing the fire proof fabric in folding-type, when the temperature under the ceiling board is $600^{\circ}C$, the temperatures over the ceiling board is $65^{\circ}C$; the difference is approximately $530^{\circ}C$. Thus its isolation-heat performance is a little inferior to the flat-type equipment.

Spatholobus suberectus Water Extract induces Apoptotic Cell Death via Inhibition of Cell Cycle in Jurkat Human Leukemia Cell Line (계혈등 추출물이 Jurkat T 임파구의 세포고사 및 세포주기 억제에 미치는 효과)

  • Cho Nam Su;Jung Woo Cheol;Na Heon Sik;Song Young Jun;Lee Kye Seung;Lee In;Jeon Byung Hun;Moon Byung Soon
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.18 no.1
    • /
    • pp.101-109
    • /
    • 2004
  • Spatholobus suberectus belonging the family Leguminosae has been used for promoting blood circulation, removing blood stasis, tonifying the blood, relaxing tendons, stopping internal bleeding and eliminating dampness in oriental traditional medicine. This study investigates whether the water extracts of S. suberectus induce apoptotic cell death in Jurkat T-acute lymphoblastic leukemia (ALL) cells. Jurkat cells were increased inhibitions of cell viability in a concentration-dependent manner by S. suberectus, as measured by cell morphology. The capability of S. suberectus to induce apoptosis was associated with proteolytic cleavage of specific target protein such as poly (ADP­ribose)polymerase protein suggesting the possible involvement of caspases. The purpose of the present study is also to investigate the effect of S. suberectus on cell cycle progression. G1 checkpoin related gene products tested (cyclin D1, cyclin dependent kinase 4, retinoblastoma, E2Fl) were decreased in their protein levels in a dose-dependent manners after treatment of the extract. These results indicate that the increase of apoptotic cell death by S. suberectus may be due to the inhibition of cell cycle progression in wild type p53-lacking Jurkat cells.

Effect of soil pile structure interaction on dynamic characteristics of jacket type offshore platforms

  • Asgarian, Behrouz;Shokrgozar, Hamed Rahman;Shahcheraghi, Davoud;Ghasemzadeh, Hasan
    • Coupled systems mechanics
    • /
    • v.1 no.4
    • /
    • pp.381-395
    • /
    • 2012
  • Dynamic response of Pile Supported Structures is highly depended on Soil Pile Structure Interaction. In this paper, by comparison of experimental and numerical dynamic responses of a prototype jacket offshore platform for both hinge based and pile supported boundary conditions, effect of soil-pile-structure interaction on dynamic characteristics of this platform is studied. Jacket and deck of a prototype platform is installed on a hinge-based case first and then platform is installed on eight skirt piles embedded on continuum monolayer sand. Dynamic characteristics of platform in term of natural frequencies, mode shapes and modal damping are compared for both cases. Effects of adding and removing vertical bracing members in top bay of jacket on dynamic characteristics of platform for both boundary conditions are also studied. Numerical simulation of responses for the studied platform is also performed for both mentioned cases using capability of ABAQUS and SACS software. The 3D model using ABAQUS software is created using solid elements for soil and beam elements for jacket, deck and pile members. Mohr-Coulomb failure criterion and pile-soil interface element are used for considering nonlinear pile soil structure interaction. Simplified modeling of soil-pile-structure interaction effect is also studied using SACS software. It is observed that dynamic characteristics of the system changes significantly due to soil-pile-structure interaction. Meanwhile, both of complex and simplified (ABAQUS and SACS, respectively) models can predict this effect accurately for such platforms subjected to dynamic loading in small range of deformation.

Effects of Transforming Growth Factor-β and Epidermal Growth Factor on the Osteoclast-like Cell Formation in the Mouse Bone Marrow Cell Culture (마우스 골수세포 배양시 transforming growth factor-β와 epidermal growth factor가 파골세포양세포의 형성에 미치는 영향)

  • Lim, Choong-Nam;Ko, Seon-Yle;Kim, Jung-Keun;Kim, Se-Won
    • Journal of Oral Medicine and Pain
    • /
    • v.25 no.1
    • /
    • pp.53-62
    • /
    • 2000
  • Bone marrow culture systems are widely used to differentiate osteoclast-like cells in vitro using several osteotropic hormones. In this study, we isolated and cultured the mouse bone marrow cells with or without some osteotropic hormones such as parathyroid hormone(PTH), prostaglandin $E_2(PGE_2)$ and $l,25(OH)_2-vitamin$ $D_3$(Vit. $D_3$). We confirmed the formation of osteoclast-like cells morphologically and functionally by the expression of tartrate-resistant acid phosphatase(TRAP) and by their capability to resorb dentin slices. We also studied the effects of transforming growth $factor-{\beta}(TGF-{\beta})$ and epidermal growth factor(EGF) on the Vit. $D_3-induced$ osteoclast-like cell formation. In control, a few multinucleated cells were formed whereas PTH and $PGE_2$ increased the number of multinucleated cells. PTH, $PGE_2$ and Vit. $D_3$ induced the formation of TRAP-positive multinucleated cells. After culture of mouse bone marrow cells on the dentin slices with or without osteotropic hormones, giant cells with diverse morphology were found on the dentin slices under the scanning electronmicroscopy. After removing the attached cells, resorption pits were identified on the dentin slices, and the shape of resorption pits was variable. EGF increased the osteoclast-like cell formation induced by Vit. $D_3$, however, $TGF-{\beta}$ showed biphasic effect, which at low concentration, increased and at high concentration, decreased the osteoclast-like cell formation induced by Vit. $D_3$.

  • PDF