• 제목/요약/키워드: capability formation

검색결과 294건 처리시간 0.028초

Cu(Mg) alloy의 산화방지막 형성에 영향을 미치는 인자 (Factors affecting passivation of Cu(Mg) alloy film)

  • 조흥렬;조범석;이원희;이재갑
    • 한국진공학회지
    • /
    • 제9권2호
    • /
    • pp.144-149
    • /
    • 2000
  • Cu(4.5at.% Mg) target을 이용하여 sputtering에 의해 증착된 Cu(Mg) alloy박막의 열처리시 형성되는 산화 방지막 MgO의 박막 특성에 영향을 주는 인자에 대해 살펴보았다. MgO 박막의 산화방지 능력 및 막질에 영향을 주는 인자로는 열처리 온도, $O_2$ 압력, Mg 농도 등으로 나타났다. MgO 박막의 두께는 열처리 온도가 증가함에 따라 증가하다 $500^{\circ}C$ 이상에서는 150 $\AA$ 정도의 성장한계두께를 나타내었다. 표면에 형성되는 MgO 박막은 $O_2$압력이 낮을수록, Mg의 농도가 높을수록 치밀한 MgO가 형성되어 산화방지에 우수한 특성을 보였으며 전 열처리 과정인 진공 열처리 공정은 1at.%정도의 낮은 Mg 농도에서도 치밀한 MgO형성에 매우 효과적임이 확인되었다. 본 연구에서 Cu(Mg) alloy박막의 열처리를 통해 낮은 저항의 Cu박막의 형성과 동시에 산화방지에 우수한 특성을 보이는 MgO 박막을 열처리 온도, $O_2$ 압력, Mg 농도 등의 최적조건을 이용하여 얻어질 수 있음을 확인하였다.

  • PDF

천공형 티타늄막을 이용한 골유도재생술 시 수종의 골이식재가 골재생에 미치는 영향 (Effect of bone graft materials on bone formation in guided bone regeneration using perforated titanium membrane)

  • 홍승범;권영혁;박준봉;허익;정종혁
    • Journal of Periodontal and Implant Science
    • /
    • 제36권1호
    • /
    • pp.223-237
    • /
    • 2006
  • The purpose of the present study was to evaluate the effect of bone graft materials including deproteinized bovine bone(DBB), demineralized freeze-dried bone(DFDB), freeze-dried bone(FDB) on bone formation in guided bone regeneration using perforated titanium membrane(TM). 16 adult male rabbits(mean BW 2kg) were used in this study and 4 rabbits allotted to each test group. Intramarrow penetration(diameter 6.5mm) was done with round carbide bur on calvaria to promote blood supply and clot formation in the wound area. The test groups were devided into 4 groups as follows: TM only(test 1), TM +DBB(test 2), TM +DFDB(test 3), TM +FDB(test 4). Perforated titanium membrane was contoured in rectangular parallelepiped shape(0.5mm pore diameter, 10mm in one side, 2mm in inner height), filled the each graft material and placed on the decorticated carvaria. Perforated titanium membrane was fixed with resorbable suture materials. The animals were sacrificed at 2, 8 weeks after the surgery. Non-decalcified preparations were routinely processed for histologic analysis. The results of this study were as follows: 1. Perforated titanium membrane was biocompatible. 2. Perforated titanium membrane had capability of maintaining the space during the healing period but invasion of soft tissue through the perforations of titanium membrane decreased the space available for bone formation. 3. In test 1 group without bone graft material, the amount of bone formation and bone maturation was better than other test groups. 4. Among the graft materials, the effect of freeze-dried bone on bone formation was best. 5. In the test groups using deproteinized bovine bone, demineralized freeze-dried bone, bone formation was a little. The spacemaking capability of the membrane may be crucial for bone formation. The combined treatment with the perforated titanium membrane and deproteinized bovine bone or demineralized freeze-dried bone failed to demonstrate any added effect in the bone formation. Minimization of size and numbers of perforations of titanium membrane or use of occlusive titanium membrane might be effective to acquire predictable results in the vertical bone formation.

Laminar Flamelet Model을 이용한 비예혼합 난류제트화염의 연소과정 및 NO 생성 해석 (Laminar Flamelet Modeling of Combustion Processes and NO Formation in Nonpremixed Turbulent Jet Flames)

  • 김성구;김후중;김용모
    • 한국연소학회지
    • /
    • 제4권2호
    • /
    • pp.51-62
    • /
    • 1999
  • NOx formation in turbulent flames is strongly coupled with temperature, superequilibrium concentration of O radical, and residence time. This implies that in order to accurately predict NO level, it is necessary to develop sophisticated models able to account for the complex turbulent combustion processes including turbulence/chemistry interaction and radiative heat transfer. The present study numerically investigates the turbulent nonpremixed hydrogen jet flames using the laminar flamelet model. Flamelet library is constructed by solving the modified Peters equations and the turbulent combustion model is extended to nonadiabatic flame by introducing the enthalpy defect. The effects of turbulent fluctuation are taken into account by the presumed joint PDFs for mixture fraction, scalar dissipation rate, and enthalpy defect. The predictive capability of the present model has been validated against the detailed experimental data. Effects of nonequilibrium chemistry and radiative heat loss on the thermal NO formation are discussed in detail.

  • PDF

Laminar Flamelet Model을 이용한 비예혼합 난류제트화염의 연소과정 및 NO 생성 해석 (Laminar Flamelet Modeling of Combustion Processes and NO Formation in Nonpremixed Turbulent Jet Flames)

  • 김성구;김후중;김용모
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.93-104
    • /
    • 1999
  • NOx formation in turbulent flames is strongly coupled with temperature, superequilibrium concentration of O radical, and residence time. This implies that in order to accurately predict NO level, it is necessary to develop sophisticated models able to account for the complex turbulent combustion processes including turbulence/chemistry interaction and radiative heat transfer. The present study numerically investigates the turbulent nonpremixed hydrogen jet flames using the laminar flamelet model. Flamelet library is constructed by solving the modified Peters equations and the turbulent combustion model is extended to nonadiabatic flame by introducing the enthalpy defect. The effects of turbulent fluctuation are taken into account by the presumed joint PDFs for mixture fraction, scalar dissipation rate, and enthalpy defect. The predictive capability of the present model has been validated against the detailed experimental data. Effects of nonequilibrium chemistry and radiative heat loss on the thermal NO formation are discussed in detail.

  • PDF

굽힘 압전 복합재료 작동기의 하중 특성 (Load Capability in a Bending Piezoelectric Composite Actuator with a Thin Sandwiched PZT Plate)

  • 우성충;구남서
    • 대한기계학회논문집A
    • /
    • 제31권8호
    • /
    • pp.880-888
    • /
    • 2007
  • This article describes the load capability of bending piezoelectric actuators with a thin sandwiched PZT plate in association with the stored elastic energy induced by an increased dome height after a curing process. The stored elastic energy within the actuators is obtained via a flexural mechanical bending test. The load capability is evaluated indirectly in terms of an actuating displacement with a load of mass at simply supported and fixed-free boundary conditions. Additionally, a free displacement under no load of mass is measured for a comparison with an actuating displacement. The results reveal that an actuator with a top layer having a high elastic modulus and a low coefficient of thermal expansion exhibits a better performance than the rest of actuators in terms of free displacement as well as actuating displacement due to the formation of the large stored elastic energy within the actuator system. When actuators are excited at AC voltage, the actuating displacement is rather higher than the free displacement for the same actuating conditions. In addition, the effect of PZT ceramic softening results in a slight reduction in the resonance frequency of each actuator as the applied electric field increases. It is thus suggested that the static and dynamic actuating characteristics of bending piezoelectric composite actuators with a thin sandwiched PZT plate should be simultaneously considered in controlling the performance.

기술축적과정에서의 사용자-생산자 관계 : 우리나라 기계제어 컴퓨터 사례

  • 임채성
    • 기술혁신연구
    • /
    • 제9권1호
    • /
    • pp.149-165
    • /
    • 2001
  • This paper analyses characteristics of the numerical controller industry in market formation and the flow of information between users and producers and the characteristic of knowledge base of the industry and discuses the difficulties derived, from the characteristics, in accumulation of technological capability. In market formation between users and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cradle market to them which produce inferior quality and lower price than imported products. The credibility of the performance of a product is different to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, which have been conventional means of knowledge transmission, are not useful in the numerical controller industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. This paper argues that these characteristics of the industry challenge existing approach to R&D management and framework of science and technology policy.

  • PDF

Effects of Physicochemical/Mineralogical Characteristics of Limestones and Porosity after Calcination on Desulfurization Reactivities

  • Baek, Chul-Seoung;Seo, Jun-Hyung;Cho, Jin-Sang;Cho, Kye-Hong;Han, Choon
    • 한국세라믹학회지
    • /
    • 제53권1호
    • /
    • pp.34-42
    • /
    • 2016
  • Characteristics of wet flue gas desulfurization and in-furnace desulfurization of domestic and overseas limestone with different crystallinity and crystalline size are studied in this article. Properties of desulfurization were evaluated in relation to physicochemical/ mineralogical characteristics, degree of pore formation for different calcination temperatures and TNC(total neutralizing capability). TNC of domestic high crystalline limestone was lower than that of overseas one. On the other hand, the porosity after calcination was shown to be relatively high for domestic limestone, which had high initial rates of desulfurization reactions in-furnace. Based on low pore formation and porosity with high TNC of crystalline high-Ca limestones compared to macrocrystalline ones, the former are preferred for wet desulfurization processes.

Lithium-silicate coating on Lithium Nickel Manganese Oxide (LiNi0.7Mn0.3O2) with a Layered Structure

  • Kim, Dong-jin;Yoon, Da-ye;Kim, Woo-byoung;Lee, Jae-won
    • 한국분말재료학회지
    • /
    • 제24권2호
    • /
    • pp.87-95
    • /
    • 2017
  • Lithium silicate, a lithium-ion conducting ceramic, is coated on a layer-structured lithium nickel manganese oxide ($LiNi_{0.7}Mn_{0.3}O_2$). Residual lithium compounds ($Li_2CO_3$ and LiOH) on the surface of the cathode material and $SiO_2$ derived from tetraethylorthosilicate are used as lithium and silicon sources, respectively. Powder X-ray diffraction and scanning electron microscopy with energy-dispersive spectroscopy analyses show that lithium silicate is coated uniformly on the cathode particles. Charge and discharge tests of the samples show that the coating can enhance the rate capability and cycle life performance. The improvements are attributed to the reduced interfacial resistance originating from suppression of solid-electrolyte interface (SEI) formation and dissolution of Ni and Mn due to the coating. An X-ray photoelectron spectroscopy study of the cycled electrodes shows that nickel oxide and manganese oxide particles are formed on the surface of the electrode and that greater decomposition of the electrolyte occurs for the bare sample, which confirms the assumption that SEI formation and Ni and Mn dissolution can be reduced using the coating process.

IT 바탕으로 한 ′기술수렴′(Technological Convergence)과 기술추격의 장애: 기계 제어 컴퓨터 사례

  • 임채성
    • 한국기술혁신학회:학술대회논문집
    • /
    • 한국기술혁신학회 2001년도 춘계학술대회:발표자료
    • /
    • pp.411-430
    • /
    • 2001
  • This Paper analyses characteristics of the numerical controller industry in market formation and the flow of information between users and producers and the characteristic of knowledge base of the industry and discusses the difficulties derived, from the characteristics, in accumulation of technological capability In market formation between users and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cradle market to them which produce inferior quality and lower price than imported products. The credibility of the performance of a product is difficult to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, which have been conventional means of knowledge transmission, are not useful in the numerical controller industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. It is conjectured that these characteristics are derived from the fact that the numerical controller is the result of IT based technological convergence in controlling machining process. This paper argues that these characteristics of the industry challenges existing approach to R&D management and framework of science and technology Policy.

  • PDF

The new criterion on performance-based design and application to recent earthquake codes

  • Azer A. Kasimzade;Emin Nematli;Mehmet Kuruoglu
    • Earthquakes and Structures
    • /
    • 제24권1호
    • /
    • pp.11-20
    • /
    • 2023
  • "Performance-based design (PBD)" is based on designing a structure with choosing a performance target under design criteria to increase the structure's resistance against earthquake effect. The plastic hinge formation is determined as one of the fundamental data in finite elements nonlinear analysis to distinguish the condition of the structure where more significant potential damage could occur. If the number of plastic hinges in the structure is increased, the total horizontal load capability of the structure is increased, also. Theoretically, when the number of plastic hinges of the plane frame structure reaches "the degree of hyperstaticity plus one", the structure will reach the capability of the largest ultimate horizontal load. As the number of plastic hinges to be formed in the structure increases towards the theoretical plastic hinge number (TPHN), the total horizontal load capability of the structure increases, proportionally. In the previous studies of the authors, the features of examining the new performance criteria were revealed and it was formulated as follows "Increase the total number of plastic hinges to be formed in the structure to the number of theoretical plastic hinges as much as possible and keep the structure below its targeted performance with related codes". With this new performance criterion, it has been shown that the total lateral load capability of the building is higher than the total lateral load capability obtained with the traditional PBD method by the FEMA 440 and FEMA 356 design guides. In this study, PBD analysis results of structures with frame carrier systems are presented in the light of the Turkey Building Earthquake Code 2019. As a result of this study, it has been shown that the load capability of the structure in the examples of structures with frame carrier system increases by using this new performance criterion presented, compared to the results of the examination with the traditional PBD method in TBEC 2019.