• 대한미생물학회지
• /
• 제21권4호
• /
• pp.407-415
• /
• 1986

This study investigated whether a correlation exists between environmental physical and biochemical factors and adherence of Candida albicans to human buccal epithelial cells by using normal and UV-irradiated strains. The results were as follows: 1. The percentage of germ tube forming activities of normal Candida albicans was 91.5% and UV-irradiated Candida albicans was 15.0%. The $LD_{50}$ of normal strains in mice were $1.0{\times}10\;cells/ml$, but could not be observed in the UV-irradiated strains even with $1.0{\times}10\;cells/ml$. It demonstrated that the virulence is decreased in the UV-irradiated strain. 2. The adherence of normal Candida albicans to human buccal epithelial cells($166{\pm}29{\sim}207{\pm}17\;cells$/100 epithelial cells) was significantly greater than UV-irradiated Candida albicans($99{\pm}21{\sim}131{\pm}25\;cells$/100 epithelial cells). 3. Candida albicans cultured at $37^{\circ}C$ adhered to buccal epithelial cells($166{\pm}16{\sim}207{\pm}17\;cells$/100 epithelial cells) in greater numbers than cultured at $25^{\circ}C$($80{\pm}15{\sim}143{\pm}22\;cells$/100 epithelial cells). 4. On comparison of the adherence of viable and nonviable(heat-killed) Candida albicans to human buccal epithelial cells, the nonviable Candida albicans demonstrated poorer adherence than viable Candida albicans. 5. Adherence in vitro of Candida albicans to human epithelial cells appeared to be effected by the pH. The adherence ability was maximum increased at pH 7.0($187{\pm}22\;cells$/100 epithelial cells) other than experimental pH. 6. The adherence was proportional to the incubation time and the Candida cell concentration in the suspension. 7. A strong correlation was shown between germ tube forming activity and increased adherence of Candida albicans to human epithelial cells, indicating that germ tube forming activity were responsible for candidal virulence.

• 대한미생물학회지
• /
• 제22권4호
• /
• pp.403-411
• /
• 1987

This study investigated whether a correlation exists between proteinase activity, phospholipase activity and adherence of Candida albicans to buccal epithelial cells by using of various strains isolated from oral cavity. The proteinase activity of 30 strains was tested by culture on agar media that contained bovine serum albumin as a nitrogen source. Using the serum-protein-agar method to test proterolysis of serum albumin in 20 strains of Candida albicans. Twenty-six strains of Candida albicans were phospholipase producers and the degree of phopholipase activity of experimental strains were $0.51{\sim}0.89$ measured by Pz-value. Twenty-eight strains of Candida albicans were adhersive to buccal epithelial cells and 15 strains were foung significantly active adherence. Fifteen strains of Candida albicans were correlated with proteinase activity and adherence to epithelial cells and concomitantly 20 strains of Candida albicans were also correlated with phospholipase activity and adherence. In conclusion our investigation provides evidence of a correlation between quantitative proteinase, phospholipase and adherence. An association of these parameters may be an important contributory factor for pathogenicity.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.402-408
• /
• 2017

PURPOSE. The goal of this study was to compare the adhesion of Candida albicans to the surfaces of CAD/CAM and conventionally fabricated complete denture bases. MATERIALS AND METHODS. Twenty discs of acrylic resin poly (methyl methacrylate) were fabricated with CAD/CAM and conventional procedures (heat-polymerized acrylic resin). The specimens were divided into two groups: 10 discs were fabricated using the CAD/CAM procedure (Wieland Digital Denture Ivoclar Vivadent), and 10 discs were fabricated using a conventional flasking and pressure-pack technique. Candida colonization was performed on all the specimens using four Candida albicans isolates. The difference in Candida albicans adhesion on the discs was evaluated. The number of adherent yeast cells was calculated by the colony-forming units (CFU) and by Fluorescence microscopy. RESULTS. There was a significant difference in the adhesion of Candida albicans to the complete denture bases created with CAD/CAM and the adhesion to those created with the conventional procedure. The CAD/CAM denture bases exhibited less adhesion of Candida albicans than did the denture bases created with the conventional procedure (P<.05). CONCLUSION. The CAD/CAM procedure for fabricating complete dentures showed promising potential for reducing the adherence of Candida to the denture base surface. Clinical Implications. Complete dentures made with the CAD/CAM procedure might decrease the incidence of denture stomatitis compared with conventional dentures.

• The Journal of Advanced Prosthodontics
• /
• 제6권1호
• /
• pp.30-34
• /
• 2014

PURPOSE. This study evaluated the adhesion to acrylic resin specimens and biofilm formation capability of Candida albicans strains isolated from HIV positive subjects' oral rinse solutions. MATERIALS AND METHODS. The material tested was a heat-cured acrylic resin (Acron Duo). Using the adhesion and crystal violet assays, 14 oral Candida albicans isolated from HIV-positive subjects and 2 references Candida strains (C. albicans ATCC 90028 and C. albicans ATCC 90128) were compared for their biofilm production and adhesion properties to acrylic surfaces in vitro. RESULTS. There were no significant differences in adhesion (P=.52) and biofilm formation assays (P=.42) by statistical analysis with Mann-Whitney test. CONCLUSION. Denture stomatitis and increased prevalence of candidal carriage in HIV infected patients is unlikely to be related to the biofilm formation and adhesion abilities of C. albicans to acrylic resin materials.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.466-476
• /
• 2006

Purpose : Colonization of denture soft lining materials by Candida albicans can result in clinical problem, and deterioration of the materials. This study aimed to compare the retention and penetration of C. albicans into four denture soft lining materials commonly used. Materials and methods : Four denture soft lining materials (Coe-comfort$^{(R)}$, Coe-soft$^{(R)}$, GC soft liner$^{(R)}$, and Tissue conditioner$^{(R)}$) discs were prepared to glass slide and dental stone. Adherence of yeast to surfaces was monitored after one hour incubation of standardized washed cell suspension with test disc surfaces. Adherent cells stained with acridine orange were counted fluorescence microscopy. Penetration of yeast into materials bonded with acrylic resin after 1, 2, 3,4, 5, 6 and 7 days incubation was observed through sections stained using acridine orange and estimated to quantitative analysis using radioisotope. Results : There was statistical significance in cell numbers between smooth and rough surfaces(p<0.05). Higher numbers of cells were observed on rough surfaces. There was statistical significance in adherent cell numbers into smooth and rough surfaces individually(p<0.05). According to the increase of incubation periods, the cells penetrated into denture soft lining materials were shown to increase. The differences among all kinds of soft liner were statistically significant(p<0.05),and the largest number of cells penetrated into soft liners was observed in the Coe-soft$^{(R)}$. Conclusion : Initial adherence and penetration of yeast into denture soft lining materials has been influenced by surface roughness and chemical composition of them. The selection of appropriate materials and their fabrication may promote clinical performance.

• The Journal of Advanced Prosthodontics
• /
• 제9권5호
• /
• pp.335-340
• /
• 2017

PURPOSE. Bacterial adhesion on provisional crown materials retained for a long time can influence the duration for which permanent prosthetic restorations can be healthily worn in the oral cavity. The aim of this study was to compare seven different commonly used provisional crown materials with regard to Streptococcus mutans and Candida albicans surface adhesion. MATERIALS AND METHODS. For each group, twenty specimens of the provisional fixed prosthodontic materials TemDent ($Sch{\ddot{u}}tz$), Imident (Imicryl), Tab 2000 (Kerr), Structur Premium (Voco), Systemp (Ivoclar Vivadent), Acrytemp (Zhermack), and Takilon-BBF (Takilon) were prepared (diameter, 10.0 mm; height, 2.0 mm). Surface roughness was assessed by atomic force microscopy. Each group was then divided into 2 subgroups (n=10) according to the microbial suspensions used: S. mutans and C. albicans. The specimens were incubated at $37^{\circ}C$ with S. mutans or C. albicans for seven days. Bacterial adherence on surfaces was assessed using the 2,3-bis[2-methyloxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-carboxanilide (XTT) assay. RESULTS. S. mutans showed maximum adhesion to Structur, followed by Systemp, Acrytemp, Takilon, Tab 2000, Imident, and TemDent (P<.05). The highest vital C. albicans adhesion was noted on Takilon, followed by Imident and Tab 2000; the lowest adhesion was noted on Systemp (P<.05). CONCLUSION. The materials showed significant differences in the degree of bacterial adhesion. C. albicans showed higher surface adhesion than S. mutans on provisional crown and fixed partial denture denture materials.

• 한국안광학회지
• /
• 제21권3호
• /
• pp.215-225
• /
• 2016

목적: 본 연구에서는 소프트콘택트렌즈의 재질 특성과 착색 여부가 눈물 성분이 침착된 소프트콘택트렌즈에 칸디다균 흡착에 미치는 영향을 알아보았다. 방법: Etafilcon A, hilafilcon B, nelfilcon A 재질의 투명 소프트콘택트렌즈와 써클 소프트콘택트렌즈를 대상으로 하여 인공눈물에 침착시키기 전과 후의 흡착 균 수를 측정하였다. 또한, 주사전자현미경을 통해 렌즈에 흡착된 균을 관찰하였다. 결과: 칸디다균의 흡착은 콘택트렌즈 재질에 따라 통계적으로 유의하게 차이가 있었다. Etafilcon A 재질에서는 투명 소프트콘택트렌즈와 써클 콘택트렌즈간 균 흡착양 차이가 없었으며, hilafilcon B 및 nelfilcon A 재질에서는 써클 소프트콘택트렌즈에 흡착된 균 수가 다소 많았다. 투명 중심부와 착색부를 비교하였을 때 투명 중심부에 칸디다균 흡착이 더 많았으며, 투명 중심부와 투명 주변부를 비교하였을 때 투명 주변부에서의 균 흡착양이 더 많았다. 눈물 단백질이 침착되었을 경우 흡착된 칸디다균의 수가 감소하였으며 눈물 단백질의 칸디다균에 대한 항균력 유지는 재질에 따라 차이가 있어 etafilcon A 재질 렌즈에서 유지 기간이 가장 길었다. 결론: 본 연구에서는 소프트콘택트렌즈의 재질 특성, 착색여부 및 부위에 따라 흡착되는 칸디다균수가 달라진다는 것을 밝혔으며, 칸디다균의 흡착 특성에 따라 관리 방법을 달리해야 할 것을 제안한다.

• Journal of Microbiology and Biotechnology
• /
• 제14권4호
• /
• pp.680-685
• /
• 2004

The capability of lactic acid bacteria (LABs) to adhere to intestinal epithelial cells and vaginal epithelial cells is an important factor in the formation of a barrier to prevent the colonization of pathogenic bacteria. In addition, the ability to coaggregate with pathogens and production of antimicrobial agents also allow LABs to fight against pathogens. In this work, Weissella confusa PL9001 was tested for its ability to inhibit the growth and adherence of genitourinary pathogens, including Candida albicans, Escherichia coli, Staphylococcus aureus, and vancomycin-resistant Enterococcus faecium (VRE), isolated from the urine of hospitalized female patients. W. confusa PL9001 was found to coaggregate with the four pathogens, as observed with a light microscope and scanning electron microscope. In competition, exclusion, and displacement tests, the adherence of the pathogens to T24 bladder epithelial cells was also inhibited by W. confusa PL9001. Accordingly, these results suggest that W. confusa PL9001 is potentially useful for both preventive and therapeutic treatment of genitourinary infections.

• 대한치과보철학회지
• /
• 제37권5호
• /
• pp.698-713
• /
• 1999

Adherence of Candida albicans(C. albicans) to the surface of a denture is believed to be an initial and essential step in the formation of denture-induced stematitis. Previous studies have provided enormous infomation on the relationship between composition of palatine gland/parotid saliva and upper denture stomatitis. Relatively little information is available on the correlation between lower denture stomatitis and sublingual-submandibular ( SLSM ) saliva. The plaque samples were collected from the two sites($100mm^2$) on the inner surface of lower partial denture corresponding to the stematitis and healthy region of the lower partial dentures of 12 denture stomatitis patients and 6 nor-mal persons who wore lower partial dentures. The samples were plated to isolate C. albicans on a selective Saboraud's dextrose agar plate and the isolates were identified by germ tube test and gram staining. The subjects were divided into group I (stomatitis with C. albican), group II (lesion without C. albicans), group III (no lesion but C. albicans), and group IV (normal and healthy denture wearer). Individual SLSM saliva($20{\mu}g$ of protein) was analyzed by SDS-PAGE (SDS -poly-acrylamide gel electrophoresis) with Coomassie brilliant blue and PAS(Periodic Acid Schinff) stain-ing. The salivary proteins separated in the polyacryamide gels were subjected to immunoblot anaysis using anti-lactoferrin, anti-sIgA, and anti-secretory component of sIgA. In this study using custom made acrylic denture resin beads(5mm in diameter) coated with stimulated individual SLSM saliva, the binding ability of individual C. albicans strains to the beads was observed. Levels of C, albicans adhered to the acrylic resin beads were determined by measuring the optical density of the bound C. albicans to the beads at 580nm. The results showed that a higher number of C. albicans was observed in the lesion site than healthy site. The saliva of group I contained more high molecular weight glycoprotein(mucin, MGI) as compared to group II, III and IV. And lactoferrin and sIgA affected to the binding ability of C. albicans to acylic resin beads. Binding ability of individual C. albicans to the acrylic resin coated with respective individual saliva was found to be greater in group I than the other 3 groups. And when bound cells of C. albicans isolated from individual subject #2 to the saliva coated beads were used binding ability of subject #2 saliva coated beads was founed to be greater than the other sutjects. These results suggested that denture induced stomatitis is related to individual patient's salivary protein composition, especially MG-1. Future studies will be directed toward saliva exam-ination of patients who have general disease and analysis of pellicles formed on prosthesis with respect to oral disease.

• 한국안광학회지
• /
• 제20권1호
• /
• pp.35-42
• /
• 2015

목적: 콘택트렌즈 재질 및 렌즈에 침착된 단백질 종류에 따른 균의 흡착력을 비교하고 관리용품의 살균력 차이를 측정하고자 하였다. 방법: FDA 평가기준 및 방법인 Disinfection Efficacy Testing의 Part 2. Regimen Procedure For Disinfecting Regimens에 따라 균 흡착 및 관리용품의 살균력 측정실험을 실시하였다. 결과: 포도상구균을 제외한 녹농균, 세라티아균, 칸디다균은 etafilcon A 렌즈에 더 많이 흡착되었으며, 4종의 다목적용액은 칸디다균을 제외한 모든 균에서 거의 완벽한 살균력을 나타냈다. 눈물 단백질을 침착시킨 렌즈에서 세라티아를 제외한 모든 균은 알부민 침착 렌즈에서의 흡착이 많았으며, 다목적용액의 살균력은 라이소자임 침착 렌즈에 흡착된 균보다 알부민 침착 렌즈에 흡착된 균에서 높은 것으로 나타났다. 또한, 균의 종류에 따라 다목적 용액의 살균력이 달랐다. 결론: 균의 종류, 콘택트렌즈 재질, 침착된 눈물 단백질의 종류가 콘택트렌즈에 흡착되는 균의 양에 영향을 주며, 눈물 단백질의 침착은 다목적용액에 의한 살균력에 변화를 초래할 수 있음을 밝혔다. 이러한 살균력에 영향을 주는 요인에 의해 콘택트렌즈 위생상태가 달라지며 부작용 발생 여부가 영향을 받을 수 있음을 제안한다.