• Asian Pacific Journal of Cancer Prevention
• /
• 제13권8호
• /
• pp.4081-4086
• /
• 2012

Complementary and alternative medicine (CAM) use is prevalent among individuals with cancer, especially breast cancer survivors. This study was conducted among 394 breast cancer survivors in selected regions of Peninsular Malaysia to identify the pattern and factors associated with CAM use. About 51% of the respondents reported CAM use as complementary treatment. Vitamins (47.2%), spiritual activities (33.2%) and other dietary supplements (30.7%) were the most commonly used CAM therapies. Common reasons for CAM use were to increase the body's ability to perform daily activities (70.9%), enhance immune function (58.3%) and improve emotional well-being (31.7%). Users obtained CAM information mainly from friends and family members (62.5%), physicians (25.0%) and mass media (13.9%). Ethnicity and years of education were significantly associated with CAM use. Although no adverse effects of CAM were reported, breast cancer survivors should discuss their CAM use with health professionals to prevent potential adverse effects of these therapies.

• 전자공학회논문지C
• /
• 제35C권6호
• /
• pp.48-55
• /
• 1998

본 논문에서는 테스트가 용이하도록 ECC(error checking circuit)를 내장하여 테스트를 수행할 수 있는 CAM(content addressable memory)를 설계하였다. 즉, CAM에서 발생하는 읽기, 쓰기 및 매치 동작의 기능 고장을 검사할 수 있는 회로를 내장한 CAM을 설계하였다. 일반적으로 테스트 회로를 내장하면 전체면적의 증가를 가져오게 된다. 본 논문에서는 기존의 병렬 비교기를 사용한 내장(built-in) 테스트 회로의 면적 오버헤드를 줄이기 위해서 새로 제안된 MTA 코드를 이용하였다. 설계한 회로는 VHDL 시뮬레이션을 통하여 검증하였으며, 0.B㎛ double-metal CMOS 공정을 이용하여 레이아웃을 수행하였다. ECC 회로의 경우 CAM의 기본 셀에서 매치기능을 담당하고 있는 XOR회로를 이용함으로써 약 30%정도 면적 감소를 가져왔다.

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.739-745
• /
• 2010

The roller gear cam can control the rotational follower periodically by attaching several roller on the circumstance of follower shaft and it is widely used in non-backlash and precise actuating mechanism such as index table or ATC of machine tools. For machining the roller gear cam, 5 axis CNC machine tool is used and the geometric principle of CAM mechanism must be adopted to generate the NC-code and to develop the special CAD/CAM software because there is not commercial CAM system to machine the roller gear cam. The maker of the specially developed software in domestic user is generally from Japan or Taiwan. However these softwares do not reflect the post processing technique for finish machining in the module. Also, there is some limitation for further new application of itself and it needs higher costs for further application. In this study, the CAD/CAM software to overcome these problem was developed. And its reliability was verified by applying it in 5-axis CNC machining. Finally, the experimental result conducted in the 5-axis machining show good consistency in the movement of follower along the flute and in its Size.

• 혜화의학회지
• /
• 제19권1호
• /
• pp.75-86
• /
• 2010

These days, traditional and complementary/alternative medicine (TM/CAM) becomes more upsurging topics of increasing importance and the use and popularity of TM/CAM is rapidly expanding, Since the tradition and situation on TM/CAM of each country is quite different, the concept and system of TM/CAM expressed by different countries shows the variety of range. Some countries recognize TM/CAM as one part of two branches of medical science and have integrated into national health care system. In these countries, education systems for TM/CAM are also well organized formal education systems, such as the Republic of Korea, DPR Korea, China (including Hong Kong and Macao), and Viet Nam. However, other countries in Asia and the Pacific. still do not have formal and/or informal education system and do not recognize TM/CAM as a kind of health care systems. This paper reviews the current situation of education and training on TM/CAM in the Asia and the Pacific. As a result, fifteen countries (31.3%) of 48 member countries in Asia and the Pacific have formal education systems for TM/CAM, twelve countries (25.0%) do not have formal education system and twenty one countries (43.7%) do not have available information. At least six countries are allocating the curriculum of medical school to the education of both allopathic and traditional medicine. For the proper use and development of TM/CAM, the development of formal education system as well as the integration into the national health care system are needed.

• 대한기계학회논문집A
• /
• 제21권6호
• /
• pp.871-883
• /
• 1997

Kinetodynamics of a cam driving slider mechanism consists of kinematic analysis and force analysis. The kinematic analysis is to determine the kinematic characteristics of a cam driving mechanism and a slider mechanism. The force analysis is to determine the joint forces of links, the contact forces of the cam and follower, and the driving torque of a main shaft. This paper proposes a close loop method and a tangent substitution method to formulate the relationships of kinematic chains and to calculate the displacement, velocity and acceleration of the cam driving slider mechanism. Also, and instant velocity center method is proposed to determine the cam shape from the geometric relationships of the cam and the roller follower. For dynamic analysis, the contact force and the driving torque of the cam driving slider mechanism are calculated from the required sliding forces, sliding motion and weight of the slider.

• 한국CDE학회논문집
• /
• 제8권1호
• /
• pp.35-40
• /
• 2003

In this paper, we present the methods to develop a Web-based CAM system that is capable to simulate machining processes in solid model form through internet. The methods include the dynamic representation on Web of machining operation, workpiece definition on the request of users, interpretation technique of NC par programs through CORBA, and algorithm for efficient machining simulation. Based on the methods, a Web-based CAM system it implemented at http://virtual.ulsan.ac.kr. Using the Web-based CAM system, public users tan simulate machining processes by own NC part programs.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.106-111
• /
• 2002

The object of this study is a manufacture of burr die using CAD/CAM systems. Systems are consist of AutoCAD, CAM software and CNC milling machine. CAM software is purpose of G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• 대한기계학회논문집
• /
• 제15권3호
• /
• pp.869-879
• /
• 1991

본 연구에서는 여러가지 평판 캠 기구에 대하여 효율적이며 정밀한 설계 및 가공을 할 수 있도록 CAD/CAM 소프트웨어를 개발하는데 목적이 있다. 즉, 주어진 캠 곡선과 캠 기구의 구성조건을 바탕으로 포락선 이론에 의하여 캠 형상을 구하고, 원하 는 가공 방법을 선정하여 황삭가공과 정삭가공에 대한 NC 파트프로그램을 얻는 기능들 을 하나의 통합된 CAD/CAM 소프트웨어로 구성하여 생산성과 효율성 및 정밀성 향상에 기여하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1353-1357
• /
• 2005

A CAM program for forming design Automated of CAM for Spring using car was developed in this study. This program was written in AUTO-LISP on the AUTO-CAD system with a personal. An approach to the system is based on the kinemateic of the object function. We make a determination of an cam programming. A cam spline is continuous in displacement, velocity and acceleration. The best cam curve is obtained by changing the kinemateic of the object function. The result has improved all characteristics such as velocity, acceleration and displacement compared with that of the modified cycloid curve.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.109-114
• /
• 2011

An impeller is difficult to machine because of severe collision due to the complex shape, overlapping and twisted shape that form impeller blades. So, most CAM software companies have developed CAM module for manufacturing impeller in addition to their CAM software. But it is not still easy for inexperienced users to machine impellers. The purpose of this paper is the development of automatic CAM module for manufacturing impeller(E-ICAM) which is based on visual basic language and it is used CATIA graphical environment in order to be easily machining impellers. Automatic CAM module for manufacturing of impellers generates tool path, and proposes recommended cutting condition according to the material of stock and tool. In addition, it has also included a post processor for 5-axis control machining. Therefore the user can easily machine impellers using this automation module.