• Bulletin of the Society of Naval Architects of Korea
• /
• v.21 no.4
• /
• pp.40-48
• /
• 1984

The computer program DASH(Direct Analysis of Ship's Hull), based on the direct calculating procedure as proposed at the 4th ISSC(1970), was developed. The DASH program is designed by the following calculation procedure: 1) Derivation of the design wave loads through the ship motion analysis based on the strip theory. 2) Stress analysis of the hull girder based on the 7-degree of the freedom beam theory including the warping torsion effect. 3) Long-term prediction of the stresses based on the statistical approach using sea-spectrums and ocean wave data in the ship's route. An example calculation was performed for the purpose of a demonstration of the present approach on the 16,200 DWT Oil Tanker. The results are discussed and compared with the conventional method.

• Journal of Integrative Natural Science
• /
• v.13 no.2
• /
• pp.83-86
• /
• 2020

In In this study, technique has been suggested according to the calculation of thresholds of histogram based on overlap areas for reducing noise while analyzing the functions of them. Suggested algorithm is to convert histogram extracted from color images to gray level and select overlap areas from extracted histogram. In addition, feature table is configured after extracting histogram in the relevant overlap area while comparing and retrieving for query and database video images by using this feature table. Suggested retrieval system has been confirmed to be more outstanding with retrieval function in video images with more noises than the system that only used color histogram.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.11
• /
• pp.1410-1416
• /
• 1999

This paper aims at investigating the operating-mode characteristics of two-module Thyristor Controlled Series Compensator (TCSC) as an equivalent of the multi-module TCSC in a simple three-phase power transmission system. The load flow program is developed to analyze the steady-state characteristics of two-module TCSC system and to find the thyristor firing angles for the required real power flow. The stability calculation program is developed with Poincare mapping theory. Simulation studies of the TCSC power transmission system using EMTP are performed to evaluate the transient characteristics of two-module TCSC as a real power flow controller and to rpove the results of the load flow calculation and the stability analysis. In the process of the study, the operating-mode characteristics of two-module TCSC are evaluated and compared to those of single-module TCSC.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.251-253
• /
• 2003

This paper discusses some practical problems of the determination of ship wave resistance from flow calculation and the model test. there are so many kind of CFD program as FLUENT, WAVIS, SHIPFLOW, COMET etc. for finding optimized hull. we should know how much percent we trust the program. so if we gather computed values of the wave resistance we'll able to get more accurated values of presumptive.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.612-613
• /
• 2007

The line impedance is important data that are applied in all analysis fields of electric power system such as power flow, fault current, stability and relay calculation etc. Usually, the impedance can be accurately calculated in case of overhead line. However, in case of power cables or combined transmission lines, the impedance can not be accurately calculated because cable systems have the sheath, grounding wires, and earth resistances. Therefore, if there is a fault in cable system, these terms will severely be caused many errors for calculating impedance. In this paper, the line impedance is measured in a power system of underground cables, and is analyzed by a generalized circuit analysis program, EMTP(Electromagnetic Transient Program), for comparison with the measured value. These analysis results are considered to become foundation of impedance calculation for underground cables.

• Steel and Composite Structures
• /
• v.13 no.6
• /
• pp.561-570
• /
• 2012

Seismic collapse analysis requires efficient and automated method to perform thousands of time history analyses. The paper introduced the advantages of speed and convergence property of explicit method, provided a few techniques to accelerate speed of calculation and developed an automated procedure for collapse assessment, which combines the strong capacity of commercial explicit finite element software and the flexible, intelligent specialties of control program written in FORTRAN language aiming at collapse analysis, so that tedious and heavy work of collapse analysis based on FEMAP695 can be easily implemented and resource of calculation can be made the best use of. All the key commands of control program are provided to help analyzers and engineers to cope with collapse assessment conveniently.

• Ocean Systems Engineering
• /
• v.9 no.1
• /
• pp.97-109
• /
• 2019

Accurate calculation of the mean drift forces and moments is necessary when studying the higher order excitations on the floater in waves. When taking the time average of the second order forces and moments, the second order potential and motion diminish with only the first order terms remained. However, in the results of the first order forces or motions, the irregular frequency effects are often observed in higher frequencies, which will affect the accuracy of the calculation of the second order forces and moments. Therefore, we need to pay close attention to the irregular frequency effects in the mean drift forces. This paper will discuss about the irregular frequency effects in the calculations of the mean drift forces and validate our in-house program MDL Multi DYN using some examples which are known to have irregular frequency effects. Finally, we prove that it is necessary to remove the effects and demonstrate that the effectiveness of the formula and methods adopted in the development of our program.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.12
• /
• pp.65-72
• /
• 2018

The purpose of this study is to predict vertical illuminance accurately at the design stage of a building without the help of simulation tools. Comparing two well-known vertical illuminance prediction algorithms with measured values, it is verified that the Igawa model is more consistent with the measured values than the Perez model. Using the DIVA program, we simulated the vertical illuminance at 30-degree intervals from south to north, compared with the vertical illuminance calculated with the Igawa model. The result of calculation values were verified from 120 degrees east to 120 degrees west. The vertical illuminance values with each of three shade devices were calculated using the Igawa model, and compared with the vertical illuminance simulated by DIVA program. As a result, all the errors when installing horizontal / vertical / grid shade divices were included in the error standard specified by ASHRAE.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.316-321
• /
• 2001

The maximum span length is decided by the relation among the independent factors of rail, train and catenary. However, During the calculation of the maximum span length with the way of Kyung-Bu High railway design using by the commercial program $\ulcorner$MATLAB$\lrcorner$ the mathematical error was founded. Therefore, this paper presents the analysis of the reason why caused the mathematical error occur.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1984.04a
• /
• pp.29-32
• /
• 1984

A microprocessor for the dedicated purpose of digital filtering has been designed and constructed. A microsequencer to control the flowing of data is designed with the concept of a hardware compiler of AHPI, statements. In order to save the processing time, this system utilizes parallel data calculation method instead of the one proposed by Peled and Liu which depended on serial calculation method. The flexible program control technique has been applied to the implementation of the sepcialprocessor for the digital signal processing.