• Geomechanics and Engineering
• /
• v.7 no.6
• /
• pp.649-663
• /
• 2014

In past few years, the use of bacterial calcium carbonate precipitation (biocementation) has become popular as a ground improvement technique for sandy soil. However, this technique was not applied to organic soil. This study focused on bacterial calcium carbonate precipitation and its effect on permeability in organic soil. A special injection system was prepared for inducing bacterial solution to the samples. The bacterial solution supplied to the samples by gravity for 4 days in specific molds designed for this work. Calcite precipitation was observed by monitoring pH value and measuring amount of calcium carbonate. Change in the permeability was measured before and after biocementation. The test results showed that the pH values indicates that the treatment medium is appropriate for calcite precipitation, and amount of precipitated calcium carbonate in organic soil increased about 20% from untreated one. It was also found that the biocementation can be considered as an effective method for reducing permeability of organic soil. The results were supported by Scanning electron microscopy (SEM) analysis and energy-dispersive x-ray (EDX) analysis.

• Korean Journal of Materials Research
• /
• v.26 no.7
• /
• pp.359-362
• /
• 2016

Mineral filler is used for resin compounds, because it increases the stiffness and thermal stability of a resin compound, and it also cuts down the cost. Calcium carbonate, silica, magnesium oxide, and others are used as filler materials in general, and the type of filler material, the size, and content can affect the physical properties of compounds. Those factors also influence the viscosity of resin mixtures and the workability, and should be adjusted by changing the contents of the filler, which depends on the size. In this study, five kinds of ground calcium carbonate, which were different in size, were used to produce polyester compounds ; the physical properties were compared with the filler size and contents. The mechanical properties were measured by bending strength and tensile strength, and the heat deflection temperature was obtained for thermal stability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.1-9
• /
• 2013

For the manufacture of linerboard with 100% KOCC, we tried to increase the solid content of wet web by employing GCC (grounded calcium carbonate) in the fiber furnish to save drying energy. Three different diameters of GCC, namely, 5, 10, and $35{\mu}m$, were used. To complement the strength loss by the addition of GCC, cationic starch and refining treatment were tried. It was found that the addition of $10-35{\mu}m$ dia. GCC to KOCC for $180g/m^2$ basis weight sheets increased the solid content of the furnish about 1-1.5% with better bulk and drainage properties. The loss of strength properties were compensated by the application of cationic starch and/or refining process to the KOCC furnish. The dia. of GCC of $35{\mu}m$ was, however, too large to make smooth surface of the sample sheet. So, the optimization process was required before implementing the results to the mill by selecting proper diameter and shape of the calcium carbonate.

• Food Science and Preservation
• /
• v.12 no.2
• /
• pp.112-116
• /
• 2005

This study was performed to investigate the effect of vinegar on the solubility of 3 types of calcium. After solubilized, total acidity and calcium content were increased as initial acid and calcium concentration increased. Addition of vinegar resulted in pH decrement while total acidity increment. Calcium content in seaweed calcium and calcium carbonate were higher than that in nano calcium. Saturated concentration of seaweed calcium and calcium carbonate were $7.0\%$ (w/v) and $6.0\%$ (w/v), respectively, in vinegar and calcium content were $2,234\;mg\%$ and $2,490\;mg\%$, respectively.

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.213-219
• /
• 2009

Crystallization experiments were performed by addition of various amino acids into biomineralization mixture of calcium carbonate. Liquid-liquid reaction of calcium carbonate was investigated by mixing calcium chloride, sodium carbonate and additives such as silk fibroin, asparagine, aspartic acid, glutamic acid and glycine. Also, the effects of reaction time, pH and solution concentration were observed. Analysis of crystals was done by FE-SEM, XRD, FT-IR equipments. FE-SEM was used in order to analyze morphology and crystal size. XRD was used to measure peak intensities and presence of $CaCO_3$ crystal. Two kinds of crystals were confirmed by FT-IR spectrum. Crystal distribution with reaction time was identified with measured peak areas of XRD and FT-IR data.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.1-8
• /
• 2012

The effects of several factors including organic pigment blending and calending conditions on the surface and optical properties of coated paper were investigated. When clay and calcium carbonate are blended in the ratio of 7 to 3, highest smoothness and relative sediment volume were obtained. When organic pigments were added to the mixture of clay and calcium carbonate, the relative sediment volume did not changed significantly. However, when organic pigments were added to calcium carbonate, sheet gloss and smoothness were improved, and showed the better results than that obtained from the mixture of organic pigment and clay. When organic pigment is blended with clay, the particles of organic pigment are buried in the packing structure of coating layer. However, the particle shape of calcium carbonate is quite different from that of clay, and the aspect ratio of calcium carbonate is similar to that of organic pigment. Thus organic pigment particles are not buried and improved effectively the physical characteristics of coating layer. When the hollow sphere pigment was blended, opacity and sheet gloss were improved significantly. Even though the coating color applied was reduced, the similar level of opacity was maintained. Also, if particle size and void volume are increased, gloss is improved, because coating layer is easily transformed in calendering. Therefore, even though lower pressure was applied during calendering, the smoothness of surface of coating layer was improved, and the decrease of void volume in coating layer was reduced, and the quality of coated sheet can be improved.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.04a
• /
• pp.70-79
• /
• 2003

Paper coating can give smoothness surface and good printability to uncoated paper. Macro roughness of base paper would be decreasing its groove and grit in view of side. Nevertheless its improving effect for paper, some kind of problem is showing in the fine coated paper. Especially, back trap mottle is one of serious problems in printing with fine coated paper. Printers can not adjust conditions to overcome the problem. Also large amounts of paper can be rejected. There are many factors that influence back trap mottle. However it is not clear what the important parameters are in back trap mottle. Back trap mottle has some relationship with ink setting but good guidelines are not clear. Back trap mottle has been linked to non-uniform ink setting. We do not know how much variation in setting we can tolerate. Other mottle issues such as micro-picking and ink refusal are still common. This paper was prepared to identify correlation with ink setting and delta ink density obtained from experiment and then tried to find out some relationships with ink setting and back trap mottle. Basically fine calcium carbonate and ciay was used for main components and coarse calcium carbonate was mixed in two fine pigments to change its porosity and ink acceptance. Micro ink tack force at KRK printing tester was adapted to measure ink setting rate. KRK units were used for back trap mottle simulation and two printed samples were prepared to check delta ink density. Clay base coating has more fast ink setting time than calcium carbonate's though smoothness of clay was better than calcium carbonate. It could be explained by that clay has finer pore in its coating than calcium carbonate. DID(delta ink density) has shown a good correlation with ink setting time from micro ink tack. The total pore volume of coating layer did not match with ink setting and DID. From the results we might conclude coating that has fine pore size around 0.05 ${\mu}m$ can be exposed to high possibility of back trap mottle.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.1
• /
• pp.7-12
• /
• 1997

This study was intended to investigate the proper shape and size of calcium carbonate for the improvement of paper properties and its end use performance. We loaded calcium carbonate of various shapes and size in the handsheet and measured their physical and optical properties. Results obtained from the study are summarized as follows : 1. Due to different particle shapes and sizes, precipitated calcium carbonate (PCC) contributed greater to bulk improvement than ground calcium carbonate (GCC). Scalenohedral form of PCC produced the bulkiest sheet, GCC made the sheet bulkier as average particle size increases. 2. Tensile strength increased as average particle size was increasing. GCC kept tensile strength more effectively than PCC. The effect of particle size on tensile strength was much more pronounced as filler addition level was increasing. 3. Over the average particle size of 6.99$\mu$m, GCC gave much higher burst strength and internal bond than PCC did. In the filler levels of 20% and 30%, GCC by using bigger size fillers showed 50~100% improvement in some cases than PCC at the same filler content. 4. Tear strength increased as average particle size was increasing. At the filler level of 30%, PCC decreased tear greatly. 5. Over the average particle size of 13.56$\mu$m, GCC kept bending stiffness greater than PCC. Due to its shape, Scalenohedral form of PCC showed higher stiffness than others at the same particle size. 6. Cubic and acicular form of PCC improved light scattering coefficient very effectively. Light scattering coefficient of GCC decreased as average particle size increased. 7. Both of particle shape and size of filler were important factor in developing optical properties and bending stiffness. Particle size was the only important factor in developing other strength properties

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.120-130
• /
• 1994

The purpose of the present investigation was to compare the effectiveness of porous hydroxyapatite (PHA) and coralline based porous calcium carbonate(PCC) as implant materials in human periodontal osseous defects. 10 adult patients having periodontitis and 2 similar angular osseous defects ${\ge}$5mm as verified by radiographic analysis and clinical probing depth ${\ge}$4mm were selected. The measurements were recorded just before surgery and after 6 month. Clinical parameters used in this study included gingival recession, pocket depth, probing attachment level, Sulcus Bleeding Index, Plaque Index, tooth mobility and bone defect depth measurements. After initial therapy, patients were treated with mucoperiosteal flap surgery. The contralateral bony defects in each patient randomly assigned to either bone graft material, one with PHA(Interpore 200) and the other with coralline based calcium carbonate(Biocoral). After 6 month both groups showed statistically significant reduction of pocket depth, Sulcus Bleeding Index, Plaque Index and significant improvement in probing attachment level. No statistically significant differences were found between the groups. There were 3.0mm or 68% of bone repair with PHA and 3.1mm, 61% with PCC. These values were likewise not significantly different. The data and clinical impression strongly suggest that both PHA and PCC are alloplastic implants with clinically apparent acceptance by the soft and hard tissue and that they can be used as bone graft materials successfully.

• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.217-227
• /
• 2023

Crystalline calcium carbonate (CaCO₃) occurs in various geological and aqueous environments as calcite, aragonite, and vaterite. These minerals also have practical applications in engineered settings. Synthetic methods of calcium carbonate have been developed for scientific research and technical applications. For example, these methods have become widely adopted for studying the formation of CaCO₃ minerals and (geo-)chemical processes involving these minerals in natural and engineered systems. Furthermore, these methods have the potential to be applied in various technical and biomedical fields. Water-based synthesis is particularly important for simulating the formation of calcium carbonate minerals in natural aqueous environments. This review paper describes the procedures and experimental conditions for water-based synthetic methods of each calcium carbonate polymorph, compares the morphological and structural features of the resulting crystals, and analyzes the crystallization mechanisms.