• 한국물환경학회지
• /
• 제26권3호
• /
• pp.525-531
• /
• 2010

To figure out the importance of temperature on electrochemical properties in water environment, calcium carbonate, one of important substances in water chemistry, was chosen to make suspensions. The result of electrokinetic potential of calcium carbonate suspensions revealed that it tended to increase as temperature increased. In addition, electrokinetic potential was negatively increased as suspensions became more basic. Its isoelectric point was ca. 7 regardless of temperature. The adsorption of hydrogen ions on calcium carbonate particles followed endothermic reaction. This result was verified by continuously measuring pH as adding HCl solution in calcium carbonate suspension. It explained that suspensions' potential was determined by DLVO theory which calculated total interaction energy between particles. Suspensions' total interaction energy was proportional to the value of electrokinetic potential. Furthermore, total interaction energy between particles increased as suspensions' temperature was increased.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.12-21
• /
• 2005

본 연구에서는 CSM 에멀젼의 물성을 향상시키고자 금속성 가교제인 magnesium carbonate 및 calcium hydroxide를 첨가하여 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다, 금속성 가교제인 magnesium carbonate 및 calcium hyroxide 양이 증가함에 따라 CSM 에멀젼 필름은 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 금속성 가교제로 magnesium carbonate를 첨가하였을 때 calcium hydroxide에 비해서 다소 높은 가교밀도와 $T_g$ 값을 보였다. 하지만 CSM 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Magnesium carbonate 0.75% 그리고 calcium hydroxide 1.0% 첨가한 경우가 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였으나, 그 이상의 양을 첨가하였을 경우에는 오히려 감소함을 확인하였다. 그러므로 본 연구에서 CSM 에멀젼의 물성을 향상시키는데 적용되는 금속성 가교제로서 calcium hydroxide 보다 magnesium carbonate가 더 적당하며, 0.75% 첨가하였을 때 보다 향상된 물성을 얻을 수 있었다.

• 접착 및 계면
• /
• 제9권2호
• /
• pp.24-31
• /
• 2008

본 연구에서는 EVA 에멀젼에 내수성 및 기계적 특성을 향상시키기 위하여 금속 이온 가교제인 calcium hydroxide 및 magnesium carbonate를 사용하여 이온성 가교결합을 도입하였다. EVA 에멀젼 필름의 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다. 금속 이온 가교제 양이 증가함에 따라 EVA 에멀젼의 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 그러나 EVA 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Calcium hydroxide 0.4% 그리고 magnesium carbonate 0.5%를 첨가한 경우가 EVA 에멀젼에 강한 이온성 가교결합이 형성되어 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였다. 그러므로 본 연구에서 calcium hydroxide 및 magnesium carbonate와 같은 금속 이온 가교제가 EVA 에멀젼의 내수성과 기계적 물성을 향상시킴을 확인하였다.

• Journal of Nutrition and Health
• /
• 제27권5호
• /
• pp.473-482
• /
• 1994

This study was to compare the bioavailability of calcium from anchovy and tofu to those of calcium from calcium carbonate(CaCO3)as the control diet and non-fat dry milk(NFDM). Rats weighing 50-60g were placed on experimental diets and deionized water at free access for 4 weeks. Diets contained 0.2% calcium from calcium-carbonate, NFDM, anchovy, tofu or 0.5% calcium as obtained were as follows : 1) No significant differences in the apparent absorption of calcium(62.5%-71.0%) were observed in the rats fed four different calcium sources at the level of 0.2% while 0.5% calcium diet group apparently absorbed calcium less efficiently(52.2%). 2) Bone length of tibia and femur was not significantly different among the groups, though 0.5% calcium of control group showed slightly longer length. 3) Tibia fat-free dry weights of 0.2% calcium of NFDM and anchovy diet groups were not significantly different from that of 0.5% calcium of control group. For femurs NFDM, anchovy and tofu groups were similar in their fat-free dry weight to that of 0.5% calcium group. 4) For calcium contents tibia contents tibia from anchovy treated group showed higher value than calcium-carbonate and tofu groups and the value was not significantly different from that of 0.5% calcium group. In femur NFDM, tofu and calcium-carbonate groups were not significantly different in their calcium content but 0.5% calcium group had higher level of calcium than 0.2% calcium groups. 5) The normalized values(NV) show that there was no significant differences in NV among 0.2% CaCO3 anchovy and tofu groups, while NV of NFDM group was significantly lower than that of calcium-carbonate group. NV of 0.5% calcium group was a little more than 50% of those in 0.2% calcium groups. Though the values obtained for the calcium bioavailability were somewhat variable among experimental products, it was demonstrated that anchovy and tofu are as good as NFDM for the dietary calcium provider when calcium intake is at marginal level.

• 자원환경지질
• /
• 제56권3호
• /
• pp.217-227
• /
• 2023

결정질 탄산칼슘(CaCO₃)은 방해석(calcite), 아라고나이트(aragonite), 바테라이트(vaterite) 세 동질이상체로 다양한 지질 및 수중 환경에서 흔하게 발생한다. 또한, 탄산칼슘 광물은 기능성 재료로 사용될 수 있어 공학적인 용도로 많은 관심을 받고 있다. 자연계와 공학적인 세팅에서 생성되는 탄산칼슘의 형성 및 그 반응을 이해하고 다양한 생약 및 생의학 물질로 활용하기 위한 탄산칼슘 광물 형성에 대한 실험적 모사 방법(즉, 합성법)에 관한 연구가 활발히 진행되어왔다. 합성법에서 물을 용매로 탄산칼슘 결정 형성을 유도하는 방식(수용액-기반 합성법)은 자연계에서 발생하는 탄산염광물 형성 조건과 유사하므로 지질학 연구에서도 그 의미성이 매우 크다. 본 리뷰 논문에서는 문헌에서 보고되는 수용액-기반 탄산칼슘 합성법을 탄산칼슘 동질이상체 별로 분류한다. 또한, 여러 합성법에서 나타나는 결정의 형상 및 구조적 특성을 동질이상체 별로 분류하고 결정화 메커니즘을 통해 그 특성들을 토론하고자 한다.

• 생명과학회지
• /
• 제17권12호
• /
• pp.1701-1708
• /
• 2007

펠렛의 목적은 기계화 정밀파종하여 파종과 솎음노력을 절감하는데 있다. 펠렛 피복물질의 용적밀도는 dialite, kaolin 및 talc 등이 낮았고 기공성은 높았다 보수력이 우수한 피복물질은 bentonite와 dialite 이었으며, 184% 및 173%의 수분을 보유할 수 있었다. 반면 calcium carbonate, calcium oxide, fly ash등은 보수력이 낮은 펠렛 피복물질이었다. 펠렛 피복물질의 pH는 kaolin과 dialite에서 각각 6.8 및 7.4로 중성이었으나, limestone, calcium oxide, bentonite 등은 pH가 12.8, 13및 10으로 강알카리였다. 전기전도도는 강알카리인 limestone, calcium oxide에서 높았다. 이와 같이 높은 pH와 전기전도도를 보인 피복물질들은 당근종자의 펠렛에 적합하지 않았다. 펠렛 피복물질를 EDS로 분석한 결과, Talc는 주성분이 Si (71%)이었고, Mg도 29% 함유하였다. 반면 calcium carbonate의 주요성분은 Ca (66.6%)이었으며, 이외에 Si (22.9%)와 Mg (10.5%)를 함유하였다. 펠렛 형성정도는 kaoline, talc 및 talc + calcium carbonate 혼합재료에서 우수하였다. 펠렛종자의 경도는 bentonite로 펠렛된 종자에서 가장 높았다. 수분흡수 후 펠렛층의 분해형태는 talc, limestone, zeolite, 및 fly ash는 열개형이었고, 용해형은 calcium carbonate와 calcium oxide등이었다. 반면 bentonite와 vermiculite는 팽창형이었다. 수분흡수 후 펠렛층의 분해는 calcium carbonate 및 kaolin으로 펠렛된 종자에서 분해가 가장 빨랐다. 펠렛배율이 높아지면 발아속도$(T_{50})$는 지연되었다. 당근종자에서 적정 펠렛배율은 19배가 좋았다.

• 상하수도학회지
• /
• 제11권1호
• /
• pp.53-63
• /
• 1997

The corrosion problems in water distribution system are reduced by decreasing the agressivity of drinking water which is evaluated by marble test and saturation indices(LSI or CCPP etc.). Marble test is a reliable method to determine the actual saturation condition of treated water. This study was done to determined the aggressivity of tap water and the effectiveness of $Ca(OH)_2$ and NaOH dosage for corrosion control. The drinking water in Seoul were evaluated by marble test and Langelier Index(LSI) and Calcium Carbonate Precipitation Potential(CCPP). The results indicated that the drinking water in Seoul were undersaturated as Calcium Carbonate($CaCO_3$). The LSI and CCPP of the water treated with $Ca(OH)_2$ were higher than that of water treated with NaOH. Therefore, to increase the Alkalinity and Calcium Hardness for corrosion control in water distribution system, $Ca(OH)_2$ is more effective than NaOH.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.15-24
• /
• 1999

A new technique for recycling of white water was developed in order to reduce the calcium hardness in a closed OCC recycling system. Calcium ions present in the white water were precipitated as calcium carbonate by reacting with sodium carbonate, and the precipitated $CaCO_3$ was removed from the system using a flotation fractionation method, which has been commonly used in deinking process. In the flotation stage, a mixed gas of $CO_2$-air was purged into the flotation cell because the pH of $Na_2CO_3$-treated white water was reduced to neutral by $CO_2$ gas. Since $CaCO_3$ precipitate tends to stick onto fine fiber surface and then selectively removed from the white water, a proper amount of suspended solid in white water acts as an important factor for deciding the removal efficiency. By the application of $Na_2CO_3$ addition-$CO_2$ flotation to the short circulated white water, the calcium hardness was significantly reduced by 87% and more. Removal of calcium ions with fine fibers led to a drainage improvement, reduction of fresh water consumption, and enhanced efficiency of wet-end chemicals.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Proceedings of Pre-symposium of the 10th ISWPC
• /
• pp.164-171
• /
• 1999

A new technique for recycling process water was developed in order to reduce the calcium hardness of the closed OCC recycling system. Calcium ions present in the white water were precipitated as calcium carbonate by a reaction with sodium carbonate and the CaCO$_3$precipitates were easily removed from the system by a dissolved air flotation(DAF) method. After the DAF stage, CO$_2$-gas was purged into the water because the pH of Na$_2$CO$_3$-treated white water was reduced to neutral by CO$_2$gas. Since CaCO$_3$precipitate tends to stick onto the fine fiber surface and then is selectively removed from the water, a proper amount of suspended solid in the process water acts as an important factor in deciding the removal efficiency. By the application of Na$_2$CO$_3$addition - DAF - CO$_2$purging to the short circulated white water the calcium hardness was significantly reduced by 92% and more. The removal of calcium ions with fine fibers led to drainage improvement, reduction of fresh water consumption, and enhanced efficiency of wet-end chemicals.

• 한국세라믹학회지
• /
• 제53권1호
• /
• pp.7-12
• /
• 2016

In this paper, we have developed a simple, new and economical carbonation method to synthesize a pure form of aragonite needles using dolomite raw materials. The obtained aragonite Precipitated Calcium Carbonate (PCC) was characterized by XRD and SEM, for the measurement of morphology, particle size, and aspect ratio (ratio of length to diameter of the particles). The synthesis of aragonite PCC involves two steps. At first, after calcinated dolomite fine powder was dissolved in water for hydration, the hydrated solution was mixed with aqueous solution of magnesium chloride at $80^{\circ}C$, and then $CO_2$ was bubbled into the suspension for 3 h to produce aragonite PCC. Finally, aragonite type precipitated calcium carbonate can be synthesized from natural dolomite via a simple carbonation process, yielding product with average particle size of $30-40{\mu}m$.