• 한국세라믹학회지
• /
• 제44권9호
• /
• pp.529-535
• /
• 2007

Calcium oxide has been used as a demolition agent in fracturing rocks and old concrete structures, etc. With the agent, demolition work can be done in safety without a noise, vibration and any other pollution, since high expansive pressure is obtained gradually by only mixing the agents with water and pouring the slurry into boreholes. But application of the non-explosive demolition agent is a time-consuming job, especially in winter. Essentially, this problem is related to the reaction rate of calcium oxide with water. This study examines the influence of additives such as cement and anhydrite on expansion pressure of calcium oxide at different curing temperatures. The expansion pressure of calcium oxide began to increase steadily with the rise of the curing temperature. When mixing calcium oxide alone with water, blown-out shot occurred. But as additives were added to calcium oxide, the reaction of calcium oxide delayed and the expansion pressure showed gradual increment. Especially, anhydrite showed a superior delaying effect than cement on the reaction of calcium oxide.

• Restorative Dentistry and Endodontics
• /
• 제21권1호
• /
• pp.187-201
• /
• 1996

The purpose of this study was to evaluate the sealing ability of a calcium hydroxide plug treated with a bonding agent. Ninety extracted human anterior teeth and premolars with single canal were used in this study. Crowns were removed. the canal's were instrumented. and the roots were randomly divided into three groups of 30 each. In control group. a single apical seat was prepared with #60 K file 1mm short of the apex and the root canal was obturated with Gutta-percha and Sealapex by the lateral condensation method. In experimental group 1 and group 2. to prepare an apical isthmus of 1mm in length. the first apical seat was prepared with a #45 K file 1mm short of the anatomical apex and with a #60 K file 2mm short for the second apical seat. Dry calcium hydroxide powders were packed in the apical isthmus with a hand plugger and #60 K file and then. the root canal was obturated with Gutta-percha and Seal apex by the lateral condensation method. In experimental group 2. following an application of the bonding agent to the plug. the root canal was obturated in the same way. The teeth of each group were immersed in a 2% methylene blue dye solution. for 1, 2, and 4 weeks. The distance from the tip of the cone to the deepest penetration was measured using the Tool maker's microscope. The results were as follows : 1. The teeth having the calcium hydroxide plug treated with the dentin bonding agent (experimental group 2) showed the lowest leakage with 1.4705mm and the control group without apical plug(no apical isthmus) showed the highest leakage with 3.1735mm. 2. The control group without apical plug showed higher leakage than experimental group 1 having the calcium hydroxide plug treated without the dentin bonding agent(p>0.05). 3. The control group without apical plug and experimental group 1, having the calcium hydroxide plug treated without the dentin bonding agent. showed higher leakage than experimental group 2. having the calcium hydroxide plug treated with the dentin bonding agent(p<0.001). 4. The immersion time had no significant effect on the degree of leakage. In conclusion, the results showed that the calcium hydroxide plug treated with the dentin bonding agent could decrease the microleakage from the root apex effectively.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.417-421
• /
• 2003

The purpose of this paper is to study on the construction of roadbed with environmental friendly soil amendment agent. The special amendment agent used in this study is mainly composed of inorganic metal salts such as sodium chloride, magnesium chloride, potassium chloride, calcium chloride,, thus is friendly to the environment, and has a function of soil-cement-agent solidification. Various components of this agent weaken the negative function of humic acid and decompose humic acid itself. Then, the calcium cation of the cement can now be made contact directly to the soil surface. The project of local road demonstration of roadbed construction with special soil treatment agent was peformed in Northeast Thailand on August 1999 by the sponsor of Highway Department of Thailand. A series of field experiments including unconfined compressive strength were carried out to investigate the physical and mechanical characteristics of solidified roadbed treated by this solidifying agent. The results of this research showed that the roadbed using poor soil could be efficiently constructed by treatment of this amendment agent.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.297-298
• /
• 2006

Free-machining agent 'KSX' contains complex calcium oxide is developed. The effect of admix ratio of KSX on mechanical properties and machinability with two different cutting speeds is reported. KSX displays improved machinability without deterioration of mechanical properties up to 0.3mass% addition. It was observed that KSX is effective with a small addition of 0.1mass% at slower cutting speed, and increased of admix ratio is effective at faster cutting speed.

• Elastomers and Composites
• /
• 제40권1호
• /
• pp.12-21
• /
• 2005

본 연구에서는 CSM 에멀젼의 물성을 향상시키고자 금속성 가교제인 magnesium carbonate 및 calcium hydroxide를 첨가하여 가교밀도, 열적특성, 표면자유에너지 그리고 인장강도, 파단신율 및 인열강도 특성을 고찰하였다, 금속성 가교제인 magnesium carbonate 및 calcium hyroxide 양이 증가함에 따라 CSM 에멀젼 필름은 가교밀도는 증가하였고, 이에 내수성과 $T_g$ 값도 증가하였다. 금속성 가교제로 magnesium carbonate를 첨가하였을 때 calcium hydroxide에 비해서 다소 높은 가교밀도와 $T_g$ 값을 보였다. 하지만 CSM 에멀젼 필름의 표면에너지 및 기계적 특성들은 다소 다른 거동을 보였다. Magnesium carbonate 0.75% 그리고 calcium hydroxide 1.0% 첨가한 경우가 가장 높은 표면 자유에너지 값과 인장강도 및 인열강도를 보였으나, 그 이상의 양을 첨가하였을 경우에는 오히려 감소함을 확인하였다. 그러므로 본 연구에서 CSM 에멀젼의 물성을 향상시키는데 적용되는 금속성 가교제로서 calcium hydroxide 보다 magnesium carbonate가 더 적당하며, 0.75% 첨가하였을 때 보다 향상된 물성을 얻을 수 있었다.

• 한국산업융합학회 논문집
• /
• 제16권2호
• /
• pp.35-39
• /
• 2013

This paper synthesized the new copper removal agent(PW-2001) and investigated removal efficiency of copper, COD, calcium, SS and sludge amounts. Removal efficiency of copper were 96.1% and 99.1% with the lime and PW-2001, respectively while COD removals reached up to 38% and 69.6% with the use of lime and PW-2001. The concentrations of calcium and SS with PW-2001 were decreased 2.68 and 4.95 times lower than those with lime. Amount of sludge with PW-2001 was 60% smaller than lime. Quantity of PW-2001 needed for coagulation only reached 58.7, compared to lime standard quantity(100), and total cost of copper removal with PW-2001 was saved 25% more than lime.

• 펄프종이기술
• /
• 제33권2호
• /
• pp.17-23
• /
• 2001

AKD sizing behavior of handsheets, which were prepared from the different pulps with various AKD fixing agents, was studied in this investigation. AKD sizing performance could be improved by removal of fines in the stock, minimizing damage of fiber, using a suitable fixing agent and heat treatment. Fillers with low surface energy, like calcium carbonate and talc, showed quite positive effect in AKD sizing. When PAM was added to the DIP stock as fixing agent, it showed lower sizing degree than polyamine did. But in case of NBKP system, PAM was more effective than polymine.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.65-70
• /
• 1993

The effect of particle size of Al powder, water repellent agent and finishing agent on frost resistance, absorption ratio and structure of micropore was examined to improve the physical properties and durability of ALC. According as the amount added of water repellent agent was increased, frost resistance was improved and absorption ratio was decreased. From one side freezing /thaw test, finishing agent which has a low vapor permeation located the crack at close indoor point of ALC specimen. ALC produced from fine Al powder has a low volume reduction by scalling and a sound appearance after freezing/thawing test and top surface freezing test, The crystal of tobermorite in ALC matrix was converted to calcium carbonate by carbonation which was accelerated with the decreasing of water content. Since the micropore of ALC was filled up by calcium carbonate, void ratio was reduced and crack was detected after complete carbonation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.117-118
• /
• 2011

The acid stained agents are able to make remarkably thin colored layers on concrete surfaces and have simple processes for applying them comparably. This study has examined properties of the reaction to acid stained agent and cement hydrate. We've observed that the C-S-W autoclave cured specimens contain less Calcium Hydroxide than the others and create tobermorite of C-S-H system crystalline and concluded that the reactions of acid stained agent become slowdown under C-S-W and cause light colors of specimens.

• 현장농수산연구지
• /
• 제13권1호
• /
• pp.35-46
• /
• 2011

포도 '캠벨얼리' 품종에서 유기칼슘제(ECa)를 수체살포하여 엽병과 과피의 칼슘농도, 과실품질 및 탄저병 발생에 미치는 영향을 조사한 결과는 다음과 같다. 칼슘제별 수체살포는 엽병 및 수확 시 과피의 칼슘농도는 무처리에 비하여 염화칼슘 0.4%, ECa 250X 및 MCa 500X 처리가 현저하게 증가하였다. ECa 시기별 수체살포는 엽병 및 수확 시 과피의 칼슘농도는 개화 7일후 및 14일후 처리가 무처리 및 21일 후처리에 비하여 현저히 증가되었다. ECa 농도별 수체살포는 엽병 및 수확 시 과피의 칼슘함량은 500X 및 무처리에 비하여 250X 및 125X 처리에서 현저하게 증가되었다. ECa 수체살포는 시기별, 농도별 과실품질 및 과방의 크기, 탄저병 및 열과 발생율은 통계적 유의성을 인정할만한 큰 차이는 나타내지 않았다. ECa 농도별 수체살포에 의한 약해발생은 육안으로 발견하지 못하였다.