• Proceedings of the Korean Society for Quality Management Conference
• /
• 1998.11a
• /
• pp.594-609
• /
• 1998

In this dissertation, a new process capability index $C_{psk}$ is introduced for non-normal process. The Pearson curve and the Johnson curve are selected for capability index calculation and data modeling the normal-based index $C_{psk}$ is used as the model for non-normal process. A significant result of this research find that the ranking of the seven indices, $C_p,\;C_{pk},\;C_{pm},\;C^{\ast}_{pm},\;C_{pmk},\;C_s,\;C_{psk}$ in terms of sensitivity to departure of the process median from the target value T=M from the most sensitive one up to the least sensitive are $C_{psk},\;C_{s},\;C_{pmk},\;C^{\ast}_{pm},\;C_{pm},\;C_{pk},\;C_p$. i.e, By the criteria adopted for evaluation of PCI's $C_{psk}$ is the most sensitive to the departure of the process median from target and $C_p$ is least

• Journal of the Korean Society for Heat Treatment
• /
• v.28 no.5
• /
• pp.239-249
• /
• 2015

Various amount of NbC carbide was intentionally formed in a matrix-type cold-work tool steel by controlled amount of Nb and C addition. And the effect of NbC addition on the mechanical properties was investigated. Four alloys with different Nb and C contents were cast by vacuum induction melting, then hot forging and spheroidizing annealing were conducted. The machinability of the annealed specimens was examined with 3 different cutting tools. And tensile tests at room temperature were conducted. After quenching and tempering, hardness and impact toughness were measured, while wear resistance was evaluated by disk-on-plate type wear test. The increasing amount of NbC addition resulted in degraded machinability with increased strength, whereas the absence of NbC also led to poor machinability due to high toughness. After quenching and tempering, the additional NbC improved wear resistance with increasing hardness, whereas it deteriorated impact toughness. Therefore, it could be found that a moderate addition of NbC was desirable for the balanced combination of mechanical properties.

• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.274-280
• /
• 2022

There is a problem that semiconductor probe pin has a short lifespan. In order to solve this problem, Ti having excellent conductivity was doped to tetrahedral amorphous carbon (ta-C) having excellent hardness and abrasion resistance. This experiment was planned through the Taguchi robust design to determine the effect of the control factor of the ta-C:Ti coating film. The effect and contribution of control factors such as Unbalanced Magnetron Sputter(UBM) discharge current, arc discharge current, temperature, and bias voltage on ta-C:Ti characteristics were analyzed from the perspective of electrical and mechanical characteristics. The UBM discharge current was set to 4, 6, and 8 A. The main control factor of thickness and resistance is the UBM discharge current, and the thickness increased and the resistance decreased as the current increased. The decrease in resistance is due to the increase in the Ti content of the ta-C:Ti coating film. The arc discharge current was set to 60, 80, and 100 A. The main control factor of hardness and wear is the arc discharge current, and as the current rises, the hardness increases and the wear area decreases. This is due to the increased ta-C content of the ta-C:Ti coating film. Since resistance and wear are important for Probe Pin, the optimal level is set from the perspective of resistance and wear and a confirmation experiment is conducted.

• 한국전자현미경학회:학술대회논문집
• /
• 2005.11a
• /
• pp.170-174
• /
• 2005

• 프린팅코리아
• /
• v.14 no.7
• /
• pp.96-97
• /
• 2015

리코코리아는 지난 5월 29일 호텔PJ에서 리코 프로 C7100s 론칭 행사 및 기자간담회를 개최했다. 이날 행사에서 리코코리아는 뛰어난 재현성과 인쇄정밀도로 포스터나 카탈로그, 봉투, 포토북에 이르기까지 고객의 니즈에 부응할 수 있는 부가가치 높은 인쇄물들을 뛰어난 품질로 출력할 수 있는 리코 프로 C7100S 시리즈를 공개했다. C7100S 시리즈는 화이트나 클리어 인쇄를 가능하게 하는 5번째 별색 토너를 활용해 기존의 CMYK로는 표현할 수 없었던 투명지나 짙은 색상의 종이에도 다품종 소량 제작이 가능하다.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.4
• /
• pp.937-943
• /
• 2007

In this paper a new process incapability index $C^*_{psks}$ is introduced for non-normal process. $C^*_{psks}$ is proposed by transformation of the $C^*_{psks}$. The use of each technique is illustrated by reference to a distribution system which includes the Pearson and Johnson functions. Accordingly, $C^*_{psks}$ is proposed as the process capability measures for non-normal process.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.1996-1998
• /
• 2014

Licochalcone C was synthesized from commercially available 2,4-dihydroxybenzaldehde by using regioselective $Al_2O_3$-mediated C-prenylation followed by conventional Claisen-Schmidt condensation in basic condition.

• 한국전기화학회:학술대회논문집
• /
• 2003.10a
• /
• pp.40-40
• /
• 2003

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.185-185
• /
• 2007

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.309-310
• /
• 2015

본 논문에서는 SiC FET를 이용한 80kW 3상 PWM 인버터의 특성에 대해 다룬다. 기존 IGBT 인버터와 SiC FET 인버터의 게이트 특성, 각 부 손실, 시스템 효율 등을 시뮬레이션 및 실험하여 비교 분석한다.