• Journal of the Korean Vacuum Society
• /
• v.3 no.1
• /
• pp.39-44
• /
• 1994

질화붕소를 스프레이코팅한 흑연과 용융 알미늄간의 진공에서의 반응기구를 여러 가지 분석장치 를 이용하여 조사하였다. 계면에 형성된 화합물층은 잘 정의된 형태를 보였으며 Al4C3 와 Al8B4C7의 혼 합상이 흑연바로 위에 형성되었고 그위는 주로 AIN층으로 이루어져 있었다. 이러한 화합물의 생성과정 과 반응기구를 자유에너지 관점에서 논의하였다. 이러한 방법으로 흑연 보우트를 제조하여 알미늄 증발 에 이용하였을 경우 매우 안정적인 증발 양상을 보였으며 $0.6mu$m/min 이상의 매우 높은 증발율을 얻을 수 있음을 확인하였다. 또한 제조원가가 저렴하고 (TiB2 BN 보우트의 약 1/100)전자빔 증발에 의해 형 성된 피막과 비교하여 손색이 없는 피막을 얻을 수 있어 새로운 저항가열 증발원으로서의 이용 가능성 을 확인하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.3
• /
• pp.208-213
• /
• 1998

Microwave dielectric properties of $BiNbO_4$ containing CuO and $V_2O_5$(BN ceramics). BN ceramic with 0.07wt% $V_2O_5$ and 0.03wt% CuO (BNC3V7) was sintered at $900^{\circ}C$ where it is possible for these to be co-fired with Ag electrode. The dielectric constant of 44.3, TCF (Temperature Coefficient of resonance Frequency) of 2 ppm/$^{\circ}$ and Q${\times}f_o$ value (product of Quality value and resonance Frequency) of 22,000GHz could be obtained from those ceramics. It is observed that orthorhombic structure was stable $1000^{\circ}C$. As sintering temperature increases, the dielectric properties decreased. The main reasons were abnormal grain growth and the main peak of triclinic moved from the main peak of orthorhombic.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.05a
• /
• pp.20-20
• /
• 2014

• Journal of Applied Biological Chemistry
• /
• v.66
• /
• pp.359-368
• /
• 2023

This study aims to explore the impact of Krill Oil (KO, Superba^TM Boost) on skin moisturization regulation. The research involved five groups: an intact control, a reference group (L-AA 100 mg/kg), and KO groups (400, 200, and 100 mg/kg), each comprising ten mice. Oral administration was conducted for 8 weeks (56 days), during which changes in body weight, hyaluronan, collagen type 1 (COL1), transforming growth factor-β1 (TGF-β1), ceramide, and water contents were analyzed in dorsal back skin tissue. Real-time PCR was employed to assess gene expression related to hyaluronic acid synthesis (HAS1, HAS2, HAS3), COL1 synthesis (COL1A1 and COL1A2), and TGF-β1. Results demonstrated that KO administration significantly increased hyaluronan content, hyaluronic acid synthesis (HAS1, HAS2, HAS3), COL1 content, COL1 synthesis (COL1A1 and COL1A2), TGF-β1 content, TGF-β1 mRNA expression, ceramide content, and water content in a concentration-dependent manner compared to the intact control. Importantly, no discernible disparities were noted between the KO and L-AA groups, even though they received equivalent oral dosages. This study accentuates the potential utility of exogenous KO in the regulation of skin moisture, thus positioning it as a promising avenue for the development of nutricosmetics. Future research endeavors should delve into the role of KO in safeguarding against both intrinsic and extrinsic aging-related skin manifestations, as well as its potential to ameliorate skin wrinkles, in conjunction with its moisturizing attributes.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.812-818
• /
• 2004

This study has been undertaken with objective of studying the mechanism and condition of formation of hexagonal boron nitride from reduction of boric okide in the presence of carbon under nitrogen atmosphere. It was found that the formation of hexagonal boron nitride was started at 1400$^{\circ}C$ and almost completed its conversion at 1550$^{\circ}C$. The morphology of boron nitride synthesized in this study was very fine and platelet. It was considered as reaction pathway of hexagonal boron nitride that boron oxide was reduced to born and evaporated by activated carbon, and then it was reacted with nitrogen.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.55-61
• /
• 2008

Previous studies on genetic transformation of chrysanthemum using cold regulated gene (BN115) have been conducted and the PCR and Real-Time PCR based method to determine the presence of the transferred cold regulated gene in the chrysanthemum was established. To check whether over-expression of BN115 gene in transgenic chrysanthemum will enhance their tolerance to cold stress, the transgenic chrysanthemum were grown under low temperature condition and several cold signalling including growth characteristics, stoma size and shape, SPAD value and ion leakage test were investigated. The transgenic chrysanthemum in the low temperature growth chamber grow much faster in term of the height, number and size of the leaves than those of wild-type plants and damage of transgenic plant caused by the low temperature was much less than that of wild-type plants. The stoma type and size of transgenic plant leaves grown at $5^{\circ}C$ were much similar to of wild-type plant cultured on $25^{\circ}C$ It has been found that SPAD value of transgenic plants was much higher than those of wild-type, but the EC density being lower under low temperature condition.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.163-164
• /
• 2009

dc unbalanced magnetron sputtering 방법으로 superhard quarternary Ti-B-C-N films을 합성하였다. XPS, XRD 분석 결과 Ti-B-C-N films은 solid-solution (Ti,C,N)$B_2$와 Ti(C,N) 결정이 amorphous BN에 분포된 나노 복합체를 형성하였다. 여기에서는 film내 N의 양에 따라 강도가 증가하다가 그 후 감소하는 경향을 보였다.

• Carbon letters
• /
• v.11 no.4
• /
• pp.332-335
• /
• 2010

The photodegradation of the model compounds Quinol, an aromatic organic compound and Acid blue FFS, an acid dye of chemical class Triphenylmethane was studied by using illumination with UV lamp of light intensity 250W. $TiO_2$ and $TiO_2$ doped with Boron and Nitrogen was used as catalyst. The sol-gel method was followed with titanium isopropoxide as precursor and doping was done using Boron and Nitrogen. In photocatalytic degradation, $TiO_2$ and doped $TiO_2$ dosage, UV illumination time and initial concentration of the compounds were changed and examined in order to determine the optimal experimental conditions. Operational time was optimized for 360 min. The optimum dosage of $TiO_2$ and BN doped $TiO_2$ was obtained to be 2 $mgL^{-1}$ and 2.5 $mgL^{-1}$ respectively. Maximum degradation % for quinol and Blue FFS acid dye was 78 and 95 respectively, at the optimum dosage of BN-doped $TiO_2$ catalyst. It was 10 and 4% higher than when undoped $TiO_2$ catalyst was used.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.2
• /
• pp.60-67
• /
• 2011

Ternary B-C-N coatings were deposited on Si(100) wafer substrate from $B_4C$ target by RF magnetron sputtering technique in $Ar+N_2+CH_4$ gas mixture. In this work, the effect of reactant gas ratio, $CH_4/(N_2+CH_4)$ on the composition, kinds and amounts of bonding states comprising B-C-N coatings were investigated using two different bias power sources of continuous and unipolar DCs. In addition, the tribological properties of coatings were studied with the composition and bonding state of coating. It was found that the substrate bias power had an effect on chemical composition, and all of the obtained coatings were nearly amorphous. Main bonding states of coatings were revealed from FTIR analyses to be h-BN, C-C, C-N, and B-C. The amount of C-C bonging mainly increased with increase of the reactant gas ratio. From our studies, both C-C and h-BN bonding states improved the tribological properties but B-C one was found to be harmful on those. The best coating from tribological points of view was found to be $BC_{1.9}N_{2.3}$ composition.

• Journal of the Korean Magnetics Society
• /
• v.10 no.5
• /
• pp.225-231
• /
• 2000

The crystallographic and magnetic properties of the sample F $e_{0.8}$ $Co_{0.18}$(BN)$_{0.02}$ synthesized by microwave arc-melting with the maximum power of 3.5 kW have been studied by the methods of an X-ray diffraction and the measurement of the magnetic hysteresis using the vibrating sample magnetometer at room temperature. The samples were prepared in a form of pellet pressed under the pressure of 9,000 N/c $m^2$, rolled coldly, and treated with the different temperatures. The X-ray diffraction pattern of pelleted sample shows that the crystal structure of the sample is bcc as same as that of Fe with a good uniformity. The X-ray diffraction pattern shows that a residual stress, which exists in the sample, is eliminated by final 90$0^{\circ}C$ annealing. As rolling rate and heat treatment temperature increases, the saturation magnetization and the remanence of the samples increase whereas the coercivity of the samples shows decrease. Also the saturation magnetization and the remanence of the samples were affected by rolling rate and rolling direction than heat treatment temperature, but the coercivity of the samples was affected by rolling rate and direction as well as heat treatment temperature. This means that a domain wall motion is easy due to elimination of a residual stress and an inclusion which exists in the sample by rolling and heat treatment and a local induced-magnetization easy axis was also formed to parallel to the rolling direction due to creation of the like-atom pairs across the slip plane by rolling......