• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권1호
• /
• pp.77-85
• /
• 2003

기존 Local Area Network(1.AN) 환경의 문제점을 명확히 분석하지 않은 상태에서 새로운 LAN 환경으로의 변환은 성능 향상은 다소 가져올 수 있으나 일반적으로 기대치 이하의 결과를 초래할 수도 있다. 또한 가까운 미래에 새로운 트래픽이나 응용 프로그램이 추가될 경우 기존과 유사한 트래픽 과다 현상을 유발할 수 있다. 따라서 LAN 환경의 변환은 기존 환경의 문제를 해소해야 함은 물론 미래의 망 확장에 유연하게 대처할 수 있도록 추진되어야 한다. 이 논문은 이러한 관점에서 현재 많은 기관에서 주로 사용중인 버스 구조의 10/100Mbps 공유 이더넷 상에서 발생하는 프로토콜과 트래픽의 문제점을 살펴보고, 망 운용 관리와 활용 측면에서 효율성을 높이기 위한 환경으로의 변환이 실제의 운용환경에서 적합한가를 사례를 들어 구현하고 그에 따른 결과를 분석하였다.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권2호
• /
• pp.177-187
• /
• 2000

최근 몇 년간 클리스터링 기반 다중 프로세서 시스템에서의 상호 연결망으로서의 버스의 제약을 극복하기 위한 단방향 지점간 링크를 이용한 링 구조가 제안되었다. 하지만 계속되는 프로세서의 고속화와 지역 버스 및 메모리의 고성능화로 인해 지점간 링크의 현재 표준 대역폭으로는 시스템 확장성에 한계를 보이며 이에 따라 대역폭 확장에 대한 연구가 필요하다. 본 논문에서는 클리스터링 기반 다중프로세서 시스템으로 개발된 PANDA 시스템을 기본 모델로 채택한다. 최근 대중화된 프로세서 및 지역 버스의 사양을 반영한 모의실험을 통해 현재의 지점간 링크가 전체 시스템 성능에 병목이 됨을 보여주고 두 배 이상의 대역폭 확장이 필요함을 보인다. 상호 연결망의 대역폭을 확장하기 위해, 두 배 증가된 대역폭을 지닌 새로운 링크를 개발하는 것은 과다한 설계비용과 개발시간이 요구된다. 이에 대한 대안으로 본 논문에서는 상용화되어있어 쉽게 적용 가능한 기존 IEEE 표준 대역폭을 가진 링크를 이용해 이중으로 링을 구성하는 몇 가지 방법 단순 이중 링, 트랜잭션 분리 이중 링, 방향 분리 이중 링 - 을 제시하고 모의실험을 통해 두 배 대역폭 단일 링과 더불어 각각의 방식에 대한 장단점을 분석한다.

• 전자공학회논문지B
• /
• 제29B권4호
• /
• pp.1-11
• /
• 1992

트랜스퓨터를 근간으로 하는 병렬컴퓨터 "KAPAC(Kaist PArallel Computer)"을 설계하고 구현하였다. KAPAC의 목적은 복잡하거나 많은 계산이 요구되는 일을 병렬로 처리하여 속도 향상을 시킴으로써 실시간 처리및 고성능 처리를 하는 많은 응용분야에 대한 계산능력을 제공하기 위함이다. KAPAC은 UNIX 컴퓨터를 Host로 하고 VME bus에 연결할 수 있는 후위 컴퓨터로 구현하였다. 구현된 병렬 컴퓨터는 32개의 처리소자를 가지고 있는 메세지 패싱 타입의 컴퓨터이며 크로스바 스위치를 사용하여 프로그램에 의해 쉽게 연결망 형태를 구성 할 수 있도록 하였다. 구현된 병렬 컴퓨터 "KAPAC"의 재구성 특성을 보기 위하여 구성할 수 있는 다양한 연결망들을 소개했으며 몇개의 응용 프로그램들이 각기 다른 상호 연결 위상에서 수행되었다.

• 한국도로학회논문집
• /
• 제18권6호
• /
• pp.1-10
• /
• 2016

OBJECTIVES : Currently, the market for carbon emissions trading has been increasing. In Korea, it is known that traffic mode rate in bike transportation is low. However, if bike transportation system is encouraged and the traffic mode rate is increased, it would be possible to reduce carbon emissions through the trading market. In this study, a practical policy to activate the bike transportation system in Korea will be proposed and verified. METHODS : Past studies regarding bike transportation system in international and domestic metropolitan cities were analyzed. Moreover, detailed reviews on recent carbon emissions trading market were performed. In particular, SWOT analysis on the bike transportation system in Korea and policy topology analysis were conducted. RESULTS : Based on the literature reviews and SWOT analysis, a new bike transportation policy was proposed. Several actual plans to adopt in Korea were proposed. In addition, a new bike transportation policy was analyzed using policy typology model, and a business model related to the cost of implementing the system and CERs were also proposed. CONCLUSIONS : It is concluded that the proposed bike transportation activation policy and several practical plans to connect CERs and a business model including bus, subway, T-money and bike riders to give some incentive were effective and reasonable. It is desired that this study will help Korea to get CERs through bike transportation activation in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.362-364
• /
• 1992

In this paper, the development of a fiber optic network for an integrated digital protection relay system is described. The structure of the developed network is determined to loosen the optic requirements and to have good extensibility while providing sufficient functions for protection and control for substations. The network has a hierarchical structure with two levels. The upper level handles data for monitoring and control of the system with star topology. The lower level manages the real time data for bus protection with one-to-one connections. Communication flows of each level are described. The HDLC is employed as the network protocol.

• Journal of Power Electronics
• /
• 제12권3호
• /
• pp.377-386
• /
• 2012

An interleaved bridgeless buck-boost AC/DC converter is presented in this paper to achieve the characteristics of low conduction loss, a high power factor and low harmonic and ripple currents. There are only two power semiconductors in the line current path instead of the three power semiconductors in a conventional boost AC/DC converter. A buck-boost converter operated in the boundary conduction mode (BCM) is adopted to control the active switches to achieve the following characteristics: no diode reverse recovery problem, zero current switching (ZCS) turn-off of the rectifier diodes, ZCS turn-on of the power switches, and a low DC bus voltage to reduce the voltage stress of the MOSFETs in the second DC/DC converter. Interleaved pulse-width modulation (PWM) is used to control the switches such that the input and output ripple currents are reduced such that the output capacitance can be reduced. The voltage doubler topology is adopted to double the output voltage in order to extend the useable energy of the capacitor when the line voltage is off. The circuit configuration, principle operation, system analysis, and a design example are discussed and presented in detail. Finally, experiments on a 500W prototype are provided to demonstrate the performance of the proposed converter.

• ETRI Journal
• /
• 제37권5호
• /
• pp.856-866
• /
• 2015

A heterogeneous network (HetNet) is a network topology composed by deploying multiple HetNets under the coverage of macro cells (MCs). It can improve network throughput, extend cell coverage, and offload network traffic; for example, the network traffic of a 5G mobile communications network. A HetNet involves a mix of radio technologies and various cell types working together seamlessly. In a HetNet, coordination between MCs and small cells (SCs) has a positive impact on the performance of the networks contained within, and consequently on the overall user experience. Therefore, to improve user-perceived service quality, HetNets require high-efficiency network protocols and enhanced radio technologies. In this paper, we introduce a 5G HetNet comprised of MCs and both fixed and mobile SCs (mSCs). The featured mSCs can be mounted on a car, bus, or train and have different characteristics to fixed SCs (fSCs). In this paper, we address the technical challenges related to mSCs. In addition, we analyze the network performance under two HetNet scenarios-MCs and fSCs, and MCs and mSCs.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.377-382
• /
• 2005

This paper presents two new circuit topologies of DC bus lineside active edge resonant snubber assisted soft-switching PWM full-bridge DC-DC converter acceptable for either utility AC 200V-rms or AC 400V-rms input voltage source. One topology of proposed DC-DC converters is composed of a typical voltage source-fed full-bridge high frequency PWM inverter using DC busline side series power semiconductor switching devices with the aid of a parallel capacitive lossless snubber. All the active power switches in the full-bridge arms and DC busline can achieve ZCS turn-on and ZVS turn-off commutations and the total turn-off switching power losses of all active switches can be reduced for high-frequency switching action. It is proved that the more the switching frequency of full-bridge soft switching inverter increases, the more soft-switching PWM DC-DC converter with a hish frequency transformer link has remarkable advantages for its efficiency and power density as compared with the conventional hard-switching PWM inverter type DC-DC converter

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.379-387
• /
• 2019

A bidirectional flyback converter is a suitable topology for use in a PV-to-bus differential power processing (DPP) module for PV applications due to its electrical isolation capability, bidirectional power transfer, high step-up ratio, and simple circuit structure. However, the bidirectional flyback converter design should consider the effect of the output-side power switch utilized for bidirectional operation compared with that of the conventional flyback converter. This study presents the structure and design methodology of the bidirectional flyback converter for a PV DPP module. Magnetizing inductance is designed by calculating the power loss of converter components within the rated load range under the discontinuous conduction mode, which is unaffected by the reverse recovery characteristics of the anti-parallel diode of the output-side power switch. The validity of the proposed design methodology is verified using a 25 W bidirectional flyback converter prototype. The operational principles and the performance of the DPP operation are verified using practical DPP modules consisting of bidirectional flyback converters implemented according to the proposed design methodology.

• 한국산업융합학회 논문집
• /
• 제23권6_1호
• /
• pp.907-915
• /
• 2020

Specification selection, Layout, specifications and combinations of Power Drives, and Ship motions were studied for FGPP(Floating Gas-fired Power Plants), which are still needed in areas such as the Caribbean, Latin America, and Southeast Asia where electricity is not sufficiently supplied. From this study, the optimal equipment layout in ships was derived. In addition, the difference between engine and turbine was verified through LCOE(Levelized Cost of Energy) comparison according to the type and combination of Power Drives. Analysis of Hs(Significant Height of wave) and Tp(spectrum Peak Period of wave) for places where this FGPP will be tested or applied enables design according to wave characteristics in Brazil and Indonesia. Normalized Sloshing Pressures of FGPP and LNG Carrier are verified using a sloshing analysis program, which is CFD(Computational Fluid Dynamics) software developed by ABS(American Bureau of Shipping). Power Transmission System is studied with Double bus with one Circuit Breaker Topology. A nd the CFD analysis allowed us to calculate linear roll damping coefficients for more accurate full load conditions and ballast conditions. Through RAO(Response Amplitude Operator) analysis, we secured data that could minimize the movement of ships according to the direction of waves and ship placement by identifying the characteristics of large movements in the beam sea conditions. The FGPP has been granted an AIP(Approval in Principle) from a classification society, the ABS.