• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.228-231
• /
• 2006

일반적으로 하이브리드 추진 연소 특성에서 연소 시간은 실험식의 인자로 고려되지 않는다. 따라서 실험의 변수로써 연소 시간이 하이브리드 연소 특성 및 추진 특성에 미치는 영향에 관하여 연구하였다. 후퇴율은 연소 시간에 따라 감소하나, 연료 질량 유속은 일정한 것으로 나타났다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.508-512
• /
• 2017

본 연구에서는, 고연소속도 고체 추진제 개발을 위하여 금속연료인 Al 과 Zr이 도입된 HTPB/AP계 추진제의 연소특성에 대한 연구를 수행하였다. 고체 추진제의 연소특성은 연소속도와 압력지수로서 평가하였으며 연소속도 증진을 위한 연소촉매제로서 Butacene을 적용하여 추진제를 제조하였다. Al과 Zr이 도입된 추진제가 성능 및 연소 특성이 향상되었음을 보였다.

• 한국진공학회지
• /
• 제19권5호
• /
• pp.326-330
• /
• 2010

Plasma electrolyte oxidation (PEO) 표면처리된 Mg 합금을 scanning electron microscopy (SEM) 방법으로 표면에 형성된 산화 막을 조사 분석하였다. 측정은 상온에서 수행하였다. Burning 및 PEO 방식의 표면처리 방법을 통해 제작 된 시료의 산화막을 SEM, EDS 및 I-V 측정을 통해 분석하였다. 그 결과 burning 방식의 표면처리가 PEO보다 내식성이 떨어지는 단점이 있지만, 전도성이 부여되는 결과를 나타낸다.

• 화약ㆍ발파
• /
• 제18권1호
• /
• pp.53-58
• /
• 2000

Thermal analysis, analysis of combustion residue and combustion characteristics measure ment such as burning rate or temperature were carried out to clarify the combustion mechanism of a tungsten- potassium perchlorate-barium chromate chromate delay powder. The results obtained are as follows. The main reaction of the delay powder of tungsten-potassium perchlorate-barium chromate is the oxidation of tungsten by potassium perchlorate. Barium chromate acts as a burning rate modifier, and the smaller the larger is the burning rate. Three types of delay composition used in this study show characteristic burning behavior. A stoichiomertric or a oxidizer-rich composition has a small linear burning rate. although it is has a large heat of combustion. On the other hand, a tungsten-excess or a fuel-rich composition with a small heat of combustion has a larger linear burning rate than the former, showing a small fractional oxidation of tungeten (below 10%) contained in the delay powder. From these results, a surface combustion mechanism is proposed for the combustion mechanism of this delay powder.

• Journal of the Korean Wood Science and Technology
• /
• 제30권3호
• /
• pp.18-25
• /
• 2002

Research to discuss the fire performance of materials requires tools for measuring their burning characteristics and validated fire growth models to predict fire behavior of the materials under specific tire scenarios using the measured properties as input for the models. In this study, burning characteristics such as time to ignition, weight loss rate, flame spread, heat release rate, total heat evolved, and effective heat of combustion for four types of wood-based materials were evaluated using the cone calorimeter and inclined panel tests. Time to ignition was affected by not only surface condition and specific gravity of the tested materials but also the type and magnitude of heat source. Results of weight loss rate, measured by inclined panel tests, indicated that heat transfer from the contacted flame used as the heat source into the inner part of the specimen was inversely proportional to specific gravity of material. Flame spread was closely related with ignition time at the near part of burning zone. Under constant and severe external heat flux, there was little difference in weight loss rate and total heat evolved between four types of wood-based panels. More applied heat flux caused by longer ignition time induced a higher first peak value of heat release rate. Burning characteristics data measured in this study can be used effectively as input for fire growth models to predict the fire behavior of materials under specific fire scenarios.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.484-488
• /
• 2010

산화제로 $GN_2O$, 고체 연료는 HDPE(High Density PolyEthlene)를 사용하여 End-Burning 하이브리드 연소 실험을 수행하여 GOX/HDPE를 사용한 결과와 연소 특성을 비교하였다. 스월 인젝터 출구의 산화제 분사 속도 차이로 인해 $GN_2O$를 사용한 경우에 GOX를 사용한 경우보다 낮은 후퇴율이 나타났으나 연소 효율은 $GN_2O$/HDPE가 GOX/HDPE의 경우보다 높게 나타났다. 연소실 압력 및 추력은 연소 시간동안 비교적 일정하게 유지되었다.

• 한국추진공학회지
• /
• 제20권4호
• /
• pp.9-18
• /
• 2016

본 논문에서는 고체 로켓 모터의 유동-구조 연성 해석을 위해서 추진제 침식 연소 모델링 및 영향인자에 대한 분석을 수행하였다. Lenoir & Robillard 모델식을 적용해 침식연소 현상을 예측하기 위해서 침식연소에 영향을 줄 수 있는 인자를 고려하여 침식연소 모사모터의 제작, 시험 및 분석을 수행하였다. 시험 결과 침식연소가 이루어짐을 확인하였으며, 이를 바탕으로 알루미늄 입자의 포함 여부, 특성 길이에 따른 침식연소 상수의 연관성, 추진제 초기 온도 영향성 등을 고려하여 침식연소 모델과 영향인자에 대해 분석하였다. 확보한 침식연소 모델을 적용하여 유동-구조 연성 해석을 수행하였으며, 시험 결과와 유사함을 확인하였다.

• 오토저널
• /
• 제10권3호
• /
• pp.60-65
• /
• 1988

The ignition characteristics of repetitive electric sparks into a quiescent acetylene-air premixture and LPG-argon-air premixture was investigated by using a home-made Repetitive-Spark-Generator(RSG) to elucidate the effect of fuel burning velocity to ignition ability of RSG. Results show that the optimum spark delay time interval is strongly related with fuel burning velocity, or implicitly with characteristic reaction time scale of each fuel.

• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1264-1270
• /
• 2004

In this paper research on micro solid propellant thruster is reported. Micro solid propellant thruster has four basic components; micro combustion chamber, micro nozzle, solid propellant and micro igniter. In this research igniter, solid propellant and combustion chamber are focused. Micro igniter was fabricated through typical micromachining and the effect of geometry was evaluated. The characteristic of solid propellant was investigated to observe burning characteristic and to obtain burning velocity. Change of thrust force and the amount of energy loss following scale down at micro combustion chamber were estimated by numerical simulation based on empirical data and through the calculation normalized specific impulses were compared to figure out the efficiency of combustion chamber.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1280-1285
• /
• 2004

Microsystem technology has been applied to space technology and became one of the enabling technology by which low cost and high efficiency are achievable. Micro propulsion system is a key technology in the miniature satellite because micro satellite requires very small and precise thrust force for maneuvering and attitude control. In this paper research on micro solid propellant thruster is reported. Micro solid propellant thruster has four basic components; micro combustion chamber, micro nozzle, solid propellant and micro igniter. In this research igniter, solid propellant and combustion chamber are focused. Micro igniter was fabricated through typical micromachining and evaluated. The characteristic of solid propellant was investigated to observe burning characteristic and to obtain burning velocity. Change of thrust force and the amount of energy loss following scale down at micro combustion chamber were estimated by numerical simulation based on empirical data and through the calculation normalized specific impulses were compared to figure out the efficiency of combustion chamber.