• Title/Summary/Keyword: burned area

Search Result 158, Processing Time 0.027 seconds

An Experimental Study of Smoke Movement in a Kindergarten Fire (어린이집 화재 시 연기 거동에 관한 실험적 연구)

  • Lee, Sung-Ryong;Han, Dong-Hun
    • Fire Science and Engineering
    • /
    • v.27 no.2
    • /
    • pp.62-69
    • /
    • 2013
  • In this study, a full scale experiment was carried out to analyze the heat and smoke movement. The experiment was conducted a kindergarten that is scheduled to reconstruction. The kindergarten is a two-story building and the area of each floor is 252 $m^2$. 36 l heptane was used as a fuel and heptane was burned in a 0.8 m square steel pool. Maximum heat release rate was 1.7 MW at natural condition. Smoke movement and temperature variation were measured during the experiment. In the first floor corridor, smoke was moved downward about 1.4 m at 1 minute after a fire. Corridor was filled with smoke at 4 minutes after a fire. In the second floor, temperature was maintained at $70^{\circ}C$ or less. But, second floor rooms were filled with smoke.

A Effects of Natural Gas-Diesel/Hi-sene Dual Fuel Operation on Performance of a Heavy-Duty Diesel engine for Power Generation (발전용 대형 디젤 엔진의 천연가스-디젤/부생유(Hi-sene) 혼합연소 시 엔진 성능변화에 미치는 영향)

  • Cho, Jungkeun;Park, Sangjun;Song, Soonho
    • Journal of Energy Engineering
    • /
    • v.25 no.1
    • /
    • pp.122-130
    • /
    • 2016
  • This study is a numerical study using commercial simulation program GT-Power on 1.5MW diesel engine for power generation. Performance comparison has done for diesel operation with dual fuel operation for different engine load(50%, 75%, 100%) using the target engine model with additional gas injection system. Effect of using Hi-sene, which is actually being used in island area, instead of diesel was also studied. As a result, under 60% natural gas with diesel condition, BSFC was increased by 32% without modifying system. There was almost no change for natural gas/Hi-sene condition compared with natural gas/diesel condition. Decrease of burned fuel fraction was the main reason of these phenomena. After optimizing system, BSFC was improved by 2%.

Lye Stricture of the Esophagus Complicated by Carcinoma

  • 유회성;이호일;이정호
    • Journal of Chest Surgery
    • /
    • v.6 no.2
    • /
    • pp.225-230
    • /
    • 1973
  • Five cases of esophageal cancer developed at the site of esophageal lye stricture were reported. Duration of lye stricture was between 13 and 40years, and all 5 cases had taken normal diet without appreciable troubles after recovery from the acute stage of burn till the suspected onset of esophageal malignaney. Outstanding symptoms of this grave condition were rather acute progressive dysphagia and frequent episodes of esophageal foreign bodies, Diagnosis could be confirmed easily by endoscopic biopsy in suspected eases, and all were epidermoid carcinoma histopathologically. Curative resection of this condition was made in neither of the cases, and their prognoses were more grave than other esophageal malignancies in our experience. The development of esophageal carcinoma at the site of corrosive esophagitis with resulting benign stricture has now been suspected as a cause and effect relationship between these two conditions, and Kiviranta: stated that the incidence of esophageal cancer in patients with lye stricture of longer duration is a thousand times higher than normal population. During last one decade the authors experienced 5 cases of esophageal carcinoma developed at the site of lye stricture of the esophagus among about 350 cases of lye burned esophagus at the Department of Thoracic & Cardiovascular Surgery, the National Medical Center in Seoul, Korea. In Korea they still use lye as a detergent in rural area, and there are still many persons ingesting lye for suicidal attempt or on accident. Lye stricture of the esophagus is, therefore, the most common esophageal disease needing surgical procedures, and the authors believe that there will be much more eases of lye stricture complicated by esophageal eareinoma repoted in near future in this Country.

  • PDF

Preparation of Lightweight Aggregate Using Glass Abrasive Sludge and Effects of Pores on the Aggregate Properties (유리연마슬러지를 사용한 경량골재 제조 및 골재의 내부기공이 물성에 미치는 영향에 관한 연구)

  • Chu, Yong-Sik;Lee, Jong-Kyu;Shim, Kwang-Bo
    • Journal of the Korean Ceramic Society
    • /
    • v.42 no.1
    • /
    • pp.37-42
    • /
    • 2005
  • Lightweight aggregate was made using glass abrasive sludge and graphite in this study. This study tried to draw the correlation between lightweight aggregate's properties and internal pore. The precursor was made by added different graphite contents and was burned for 20 min. at $700^{circ}C$ and $800^{circ}C$. The volume change of aggregate was checked at before and after homing, and confirmed that the homing temperature effected more than expanding agent on volume change. The size and area of pore in aggregate increased according to the amount of expanding agent and homing temperature but it didn't bring about big effect above $1\%$ of expanding agent. The absorbtion ratio, thermal conductivity and porosity have a high correlation, so each coefficient of correlation showed above $0.8\pm$.

A Study on Estimation of Air Pollutants Emission from Wood Stove and Boiler, Wood-pellet Stove and Boiler (화목난로∙보일러와 펠릿난로∙보일러 사용에 의한 대기오염물질 배출량 산정에 관한 연구)

  • Kim, Dong-Young;Han, Yong-Hee;Choi, Min-Ae;Park, Sung-Kyu;Jang, Young-Kee
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.30 no.3
    • /
    • pp.251-260
    • /
    • 2014
  • Biomass burning is one of the significant emission source of PM and CO, but a few studies are reported in Korea. Air pollutants emission from biomass burning such as wood stove and boiler, and wood-pellet stove and boiler were estimated in this study. Activity levels related to biomass burning such as fuel types, amount of fuel loading, and location and temporal variation were investigated by field survey over Korea. Fuel loadings were 14.9 kg/day for wood stove, 31.3 kg/day for wood boiler, 12.8 kg/day for wood-pellet stove, 32.5 kg/day for wood-pellet boiler during the season of active use. These were mostly burned in winter season from october to april of next year. Estimated annual emissions from wood stove & boiler were CO 76,677, $NO_x$ 710, $SO_x$ 70, VOC 20,941, TSP 6,605, PM10 2,921, PM2.5 1,851, and NH3 7 ton/yr, respectively. Emissions from wood-pellet stove and boiler were CO 32,798, $NO_x$ 1,830, $SO_x$ 25, VOCs 5,673, TSP 629, PM10 457, PM2.5 344, and $NH_3$ 2 ton/yr, respectively. When the emission estimates are compared with total emissions of the national emission inventory (CAPSS: Clean Air Policy Support System), Those occupy 12.5%, 2.8% of total national emission for CO and PM10, respectively. These results show wood and wood-pellet burning appliances were one of the major source of air pollution in Korea. In future, these types of heaters need to be regulated to reduce air pollution, especially in suburb area.

3D RANS Simulation and the Prediction by CRN Regarding NOx in a Lean Premixed Combustion in a Gas Turbine Combustor (희박 예혼합 가스터빈 연소기 3 차원 전산 해석 및 화학반응기 네트워크에 의한 NOx 예측)

  • Yi, Jae-Bok;Jeong, Dae-Ro;Huh, Kang-Yul;Jin, Jae-Min;Park, Jung-Kyu;Lee, Min-Chul
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.35 no.12
    • /
    • pp.1257-1264
    • /
    • 2011
  • This paper presents 3D simulation by STAR-CCM+ for lean premixed combustion in a stationary gas turbine combustor with separate pilot and main nozzles. The constant for the source term in the flame area density transport equation was modified to account for a low global equivalence ratio and validated against measurement data. A Partially-premixed Coherent Flame Model(PCFM) involves propagation of a laminar premixed flame with the predicted flame surface density and equilibrium assumption in the burned gas with spatial inhomogeneity. The conditions for cooling by radiation and convection are considered for accurate determination of the heat flux on the wall. A parametric study is of the pilot-fuel-to-total-fuel-ratio is carried out. A chemical reactor network (CRN) was constructed on the basis of the 3D simulation results and compared against measurements of NOx.

Study On the Characteristics of Milled $UO_2$ Powder Prepared by Oxidation and Reduction Process (산화ㆍ환원처리된 $UO_2$ 분말의 분쇄특성 연구)

  • Lee Jae-Won;Lee Jung-Won
    • Resources Recycling
    • /
    • v.11 no.4
    • /
    • pp.3-10
    • /
    • 2002
  • The characteristics of dry and wet milled powder prepared by 1 cycle OREOX (oxidation and reduction of oxide fuels) treatment were investigated using the simulated spent fuel pellet. Sintered pellets simulating spent nuclear fuel burned in reactor were fabricated from $UO_2$ powder using as a starting material in fabrication of nuclear fuel. The 1 cycle OREOX-treated powder was prepared by only one path of oxidation md reduction of the simulated pellet. Powder having average particle size of less than 1 $\mu\textrm{m}$ could be easily obtained by dry milling, but not be achieved by wet milling. And, specific surface area of dry milled pow-der was higher than that of wet milled powder. Dry milled powder formed loose agglomerate, while wet milled powder showed the shape of irregular and angular particles. Dry milled powder provided higher green density, resulting in higher sintered density of higher than 95% TD and average grain size of larger than 8 $\mu\textrm{m}$ satisfying the standard specification of sintered pellets.

Analysis of Vertical Combustion and Carbonization Patterns of Floor Materials When Using a Needle Flame (니들 플레임에 의한 바닥재의 수직 연소 및 탄화 패턴의 해석에 관한 연구)

  • Park, Min-Su;Choi, Chung-Seog
    • Fire Science and Engineering
    • /
    • v.34 no.4
    • /
    • pp.101-106
    • /
    • 2020
  • This study analyzed flame growth characteristics and carbonization patterns when floor materials were burned vertically using a needle flame produced for this study. It was found that PVC flooring was fire retardant and the area under direct flame contracted inward. Vertical combustion causes solidification in the form of a lump at the bottom and also generates soot in a pattern that progresses upwards. This study found that laminated flooring exhibited no fire retarding characteristics and that the laminated layer of its upper surface was destroyed by fire, causing irregular delamination. The carbonization ranges at the left and right sides were determined to be symmetrical. A vertical combustion test of a sample carpet showed that it exhibited no fire-retarding characteristics. It was observed that if heat accumulated in the carpet, the flame formed an ascending air current, and that when flammable materials were present around the flame, they further accelerated the diffusion of the flame. The carbonization pattern at the carpet surface exposed to direct flame revealed that the carpet surface had melted and had flown downwards and that many tiny holes formed on it.

Influence of Forest Fire on Soil Microarthropod Fauna (산불이 토양 미소절지동물상에 미치는 영향)

  • Choi, Seong Sik
    • The Korean Journal of Ecology
    • /
    • v.19 no.3
    • /
    • pp.251-260
    • /
    • 1996
  • The effect of forest fire on soil microarthropod fauna was investigated in the Inhoo Park, located at Deokjin-gu, Chonju city, where fire burned about 2 hectares on April 5, 1994. Vegetation of the area was covered with mixed forest such as 20 to 30 year old black locust, alder, and pine gree, etc., and also rich in understory plants, dead leaves, twigs, etc. The soil samples were taken from burnt soil and near-by control site on April 10, June 6 and Oct. 22 in 1994, and June 26, 1995. Soil microarthropods were extracted using Tullgren apparatus for 72 hours. Soil microarthropods collected in this experiment were 8, 013 at control and 3, 805 at the burnt site making a total of 11, 818 from 5 classes. Therefore, appearance of microarthropods was reduced to 52.5% at burnt site. Dominant animal groups were Acari (45%) and collembola (46%). The reduced rate of soil animal density by fire damage was 52.5% of the total soil microarthropods accounting 36% in Acari and 70% in collembola. The reduction of soil animal density by fire was 65.3% by habitat destruction and 51.7% by diret shock from fire heat. In Collembola, 89% was reduced by habitat destruction. Oribatid mites collected at sample plots included 29 families, 47 genera and 58 species. Forty-two species at burnt site and 47 species at unburnt site were identified, of these 32 being common species at both sites. The density ratio of soil animals at the burnt sites and those at unburnt sites was 38.6% va 61.4% resulting in 37% reduction due to fire. The dominant species with more than 5% in relative density were Trichogalumna nipponica (7.3%) and Eremobelba japonica (5.8%) at unburnt site, shereas 5 species including Eohypochthonius crassisetiger (8.5%) at the burnt site. The number of these species were 32.1% of total number. MGP analysis based on the number of oribatid mites indicated GP type at both unburnt and burnt sites, revealing domination of the P group in oribatid mites.

  • PDF

A Comparative Experiment on the Emission Gas Characteristics of Domestic RDF (국내산(國內産) RDF의 배출(排出)가스 특성(特性) 비교실험(比較實驗))

  • Park, Myung-Ho
    • Resources Recycling
    • /
    • v.16 no.6
    • /
    • pp.46-51
    • /
    • 2007
  • This study aimed at developing high-efficiency RDF(refuse derived fuels) fuel in order to use RDF energy rationally and to recycle industrial product. As most studies in this area are concentrated in large combustion apparatuses such as kilns, but this study was focused on the small-sized heating systems, applying them directly to grate type boiler which has a heating capacity of $66{\sim}132m^2$. The different kinds of fuel are experimented including RDF. Coke and Waste Tire. First, for this, we experimented and analyzed RDF to see the change in its mass and heating value. Also, four kinds of exhaust gas are sampled by gas analyzer including CO, $CO_2$, NO and $NO_2$ at different temperature. As a result, the levels of CO concentration of RDF are higher than these of coke and waste tire. But, the levels of NO, $CO_2$ and $SO_2$ concentration of RDF and coke were lower then the levels when waste tire is burned.