• 대한기계학회논문집B
• /
• 제22권3호
• /
• pp.360-372
• /
• 1998

This study deals with the interaction between buoyancy-induced convection and externally imposed excitation in the form of harmonic rocking and the effect of the interaction upon heat transfer in low-Pr liquids. A wide array of system responses are discussed using the spectral collocation numerical technique. The superposition of buoyancy and Coriolis forces leads to complex fluid flow and heat transfer. The transition to chaotic convection is accelerated, and heat transfer rates are reduced as the enclosure is excited at the fundamental frequency of oscillation associated with the pure buoyancy-driven case. Average heat transfer rates are correlated for Pr=0.02 and 0.03. The heat transfer is affected more in the Pr=0.03 liquid than the case of Pr=0.02.

• Nuclear Engineering and Technology
• /
• 제15권1호
• /
• pp.50-56
• /
• 1983

Scram이 일어난 후 과도 기간 동안 LMFBR 출구공간에 있어서의 유동성층의 영향은 특별한 문제로 제기되고 있다. 이러한 경우에 난류 혼합에 미치는 부력 효과는 설계자에게 중요하다. 난류 유동 방정식에 부력 효과를 갖지 않는 기존 난류 모형의 부력효과를 더하기 위한 연구가 행해졌다. 개발된 부력 난류 유동의 물리적 모형은 SMAC 수치 해석 방법을 통하여 풀어졌다. 개발된 수치 해석 모형이 시험되어졌고, 실험자료와도 비교되었다. 결과는 난류에 대한 부력 효과가 출구공간에서 난류를 강하게 억압하며 성층의 안정도를 상당히 증가시켰다.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.43-48
• /
• 2013

In this paper, magnetic buoyancy force on nonmagnetic solid object submerged in magnetic liquid was simulated and measured. For the evaluation of the force, a multi-physics approach of hydrostatic equilibrium considering magnetic body force as well as gravity is presented. The magnetic body force should be regarded as an additional forcing term in the momentum equation of hydrodynamics. It is also shown that the virtual air-gap based Kelvin's force formula is a useful method for the calculation of force distribution in the magnetic liquid. The experimental result which was performed by a load-cell measurement system agreed quantitatively well with the numerical one.

• 한국터널지하공간학회 논문집
• /
• 제20권2호
• /
• pp.501-511
• /
• 2018

최근 '도로터널 방재시설 설치 및 관리지침'의 개정으로 인해 터널 내 제연용 제트팬의 용량 산정 시에는 열부력을 고려하도록 규정하고 있다. 그러나 열부력을 고려하는 세부방법론에 대한 규정이 없어, 이에 대한 세부적인 추가 연구가 필요한 실정이다. 본 연구에서는 터널 내 화재 시 열부력을 고려하기 위하여 3차원 수치해석 시뮬레이션을 수행하여 터널 내열부력을 계산하고, 화재차량의 진행방향에 따라 열부력과 차량항력의 관계, 즉, 화재차량의 위치에 따른 터널 내 제연용 제트팬 용량 산정방법에 대하여 검토를 수행하였다. 분석결과에 따르면, 하향경사 터널의 경우에는 열부력이 터널 내 저항력으로 작용하며, 터널 내 화재연기를 제연하기 위해 필요한 제연팬의 승압력은 단순히 터널 입구부의 열부력 값과 출구부의 차량항력값에 의해 단순히 결정되지 않으며, 터널 내 화재차량의 위치에 따라 종합적인 검토가 필요한 것으로 분석되었다.

• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.51-58
• /
• 2015

Global buckling is a bending of pipeline and it occurs when the stability of pipeline is distributed by excessive axial force. Subesea pipeline is subjected to axial force induced by temperature and pressure from well and resulting phenomena should be controlled in appropriate manner. Global buckling of subsea pipeline is still ongoing research subject and is studied various organization. In this study, various control methods such as buoyancy module, sleeper, and snake lay for global buckling of subsea pipeline were numerically investigated with various design parameters. From the numerical simulation results, the global buckling control method using sleepers shows better results than buoyancy module and snake lay control methods in the sense of combined stress after buckling. Furthermore, the global buckling of full scale pipeline of 80km with uneven seabed profile were successfully managed when the sleeper was installed.

• 대한임베디드공학회논문지
• /
• 제12권2호
• /
• pp.105-112
• /
• 2017

To control the depth of an underwater glider, a control method by using Lyapunov's direct method is proposed. The underwater glider has a torpedo-shape hull, a movable mass in the hull, and an inflatable buoyancy bag in the hull, but doesn't have large wings that increase the lift force for the conventional underwater glider. The control laws to adjust the position of the movable mass and the mass of the inflatable buoyancy bag are derived. For a selected speed and an angle of attack, we simulated the operation of the underwater glider using Matlab/Simulink. The efficiency of the proposed controller is shown in the fact that the control effort is active during only a short period of time when the zigzag trajectory is changed from downward to upward or vice versa.

• 한국정밀공학회지
• /
• 제31권1호
• /
• pp.91-96
• /
• 2014

We present a droplet-manipulation method using opto-thermal flows in oils. The flows are originated from Marangoni and buoyancy effects due to temperature gradient, generated by the adsorption of light on an amorphous silicon thin film. Using this method, we can transport, merge and mix droplets in an extremely simple system. Since the temperature rise during the operation is small, this method can be used for biological applications without the damage on cell viability.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.725-733
• /
• 1990

본 연구에서는 Raju등의 연구의 확장으로 일정한 온도로 유지되는 경사진 평 판에 대하여 혼합대류 전 영역에 유효한 부력계수(.xi.)로서 (1+Gr$^{2}$$_{x}$cos.gamma./ Re$^{4}$$_{x}$)$_{-1}$를 적용하여 비상사 경계층 방정식을 유도하였다. 또한 적분 형 경계조건을 가진 편미분 경계층방정식을 유한차분법으로 Keller와 Cebeci의 Box scheme을 6차로 적용하여 수치해석하였다. 부력계수가 큰 영역에서 Mucoglu등의 해 석적 연구결과는 일정한 온도와 45˚의 경사를 유지하는 평판에 대한 Ramachandran의 실험적 연구결과와 약 10%정도 벗어난다. 이에 Ramachandran의 실험적 연구를 해석 적으로 재고찰하였다.하였다.

• 대한조선학회논문집
• /
• 제58권3호
• /
• pp.175-181
• /
• 2021

This study describes the model tests in ice according to the frictional coefficient of an ice-breaking ship and the change in ice resistance by the analysis method for each component of ice resistances. The target vessel is a 90K DWT ice-breaking tanker capable of operating in ARC7 ice conditions in the Arctic Ocean, and twin POD propellers are fitted. The hull was specially painted with four different frictional coefficients on the same ship model. The total ice resistance can be separated by ice breaking, ice buoyancy, ice clearing resistances through the tests in level ice, pre-sawn ice and creep test in pre-sawn ice under sea ice thickness of 1.2 m and 1.7 m. Ice resistance was analyzed by correcting the thickness and bending strength of model ice by the ITTC correction method. As the frictional coefficient between the hull and ice increases, ice buoyancy and clearing resistances increase significantly. When the surface of the hull is rough, it is considered that the broken ice pieces do not slip easily to the side, resulting in an increase in ice buoyancy resistance. Also, the frictional coefficient was found to have a great influence on the ice clearing resistance as the ice thickness became thicker.

• Bulletin of the Korean Chemical Society
• /
• 제13권3호
• /
• pp.332-334
• /
• 1992

An accurate method of density measurement is proposed. The method makes use of a gravimetric adsorption apparatus and is quite suitable for powdery and porous solid samples. The sample volume is determined by measuring its buoyancy with microbalance and the mass is measured in vacuum in the absence of buoyancy effect. Densities of inorganic compounds, such as alumina and perovskite, and some organic compounds are determined with the proposed method, and the results are compared with the values either determined with conventional methods or obtained from literatures.