In this paper, the properties of reclaimed ash(RA) from various domestic thermal power plants(S, D and H) were analyzed, and the possibility of fabricating the artificial lightweight aggregate(ALA) using RA was studied. The chemical compositions of RA are similar to the clay, but it had higher concentrations of alkali earth metal oxides(CaO, MgO) and unburned-carbon. The TCLP(Toxicity Characteristic Leaching Procedure) results showed that the dissolution concentrations of heavy metal ions of RA were below the limitation defined by the enforcement regulation of wastes management law in Korea. The results of IC analysis showed that leaching concentration of $Cl^-$ ion was 124 ppm for RA of HN and ${SO_4}^{2-}$ ion was leached a few hundreds ppm for all RA in this study. The ALAs with various mass ratio of clay to reclaimed ash(RA:Clay = 7:3, 6:4, 5:5, 4:6, 3:7) were sintered with a electric muffle furnace at the temperature of $1050{\sim}1200^{\circ}C$. The specific gravity and water absorption(%) of the sintered ALAs were 1.1~1.8 and 10~30% respectively. The ALA sintered in the rotary kiln at $1125^{\circ}C$ showed a bulk density of 1.7 and water absorption of 15.2%.
Kim Ki-Seung;Van Kyujung;Kim Moon Young;Lee Suk-Ha
한국작물학회지
/
제49권5호
/
pp.429-433
/
2004
A single recessive gene, rxp, controls the bacterial leaf pustule (BLP) resistance in soybean and in our previous article, it has been mapped on linkage group (LG) D2 of molecular genetic map of soybean. A total of 130 recombinant inbred lines (RILs) from a cross between BLP-resistant SS2-2 and BLP-susceptible Jangyeobkong were used to identify molecular markers linked to rxp. Fifteen simple sequence repeat (SSR) markers on LG D2 were screened to construct a genetic map of rxp locus. Only four SSR markers, Satt135, Satt372, Satt448, and Satt486, showed parental polymorphisms. Using these markers, genetic scaffold map was constructed covering 26.2cM. Based on the single analysis of variance, Satt372 among these four SSR markers was the most significantly associated with the resistance to BLP. To develop new amplified fragment length polymorphism (AFLP) marker linked to the resistance gene, bulked segregant analysis (BSA) was employed. Resistance and susceptible bulks were made by pooling equal amount of genomic DNAs from ten of each in the segregating population. A total of 192 primer combinations were used to identify specific bands to the resistance, selecting three putative AFLP markers. These AFLP markers produced the fragment present in SS2-2 and the resistant bulk, and not in Jangyeobkong and the susceptible bulk. Linkage analysis revealed that McctEact97 $(P=0.0004,\;R^2=14.67\%)$ was more significant than Satt372, previously reported as the most closely linked marker.
Polymer-fullerene based bulk heterojunction (BHJ) solar cells can be fabricated in large area using low-cost roll-to-roll manufacturing methods. However, because of the low mobility of the BHJ materials, there is competition between the sweep-out of the photogenerated carriers by the built-in potential and recombination within the thin BHJ film [12-15]. Useful film thicknesses are limited by recombination. Thus, there is a need to increase the absorption by the BHJ film without increasing film thickness. Metal nanoparticles exhibit localized surface plasmon resonances (LSPR) which couple strongly to the incident light. In addition, relatively large metallic nanoparticles can reflect and scatter the light and thereby increase the optical path length within the BHJ film. Thus, the addition of metal nanoparticles into BHJ films offers the possibility of enhanced absorption and correspondingly enhanced photo-generation of mobile carriers. In this work, we have demonstrated several positive effects of shape controlled Au and Ag nanoparticles in organic P3HT/PC70BM, PCDTBT/PC70BM, Si-PCPDTBT/PC70BM BHJ-based PV devices. The use of an optimized concentration of Au and Ag nanomaterials in the BHJ film increases Jsc, FF, and the IPCE. These improvements result from a combination of enhanced light absorption caused by the light scattering of the nanomaterials in an active layer. Some of the metals induce the plasmon light concentration at specific wavelength. Moreover, improved charge transport results in low series resistance.
Silicon nanowires (SiNWs), due to their unusual quantum-confinement effects that lead to superior electrical and optical properties compared to those of the bulk silicon, have been widely researched as a potential building block in a variety of novel electronic devices. The conventional means for the synthesis of SiNWs has been the vapor-liquid-solid method using chemical vapor deposition; however, this method is time consuming, environmentally unfriendly, and do not support vertical growth. As an alternate, the electroless etching method has been proposed, which uses metal catalysts contained in aqueous hydrofluoric acids (HF) for vertically etching the bulk silicon substrate. This new method can support large-area growth in a short time, and vertically aligned SiNWs with high aspect ratio can be readily synthesized with excellent reproducibility. Nonetheless, there still are rooms for improvement such as the poor surface characteristics that lead to degradation in electrical performance, and non-uniformity of the diameter and shapes of the synthesized SiNWs. Here, we report a facile method of SiNWs synthesis having uniform sizes, diameters, and shapes, which may be other than just cylindrical shapes using a modified nanosphere lithography technique. The diameters of the polystyrene nanospheres can be adjustable through varying the time of O2 plasma treatment, which serve as a mask template for metal deposition on a silicon substrate. After the removal of the nanospheres, SiNWs having the exact same shape as the mask are synthesized using wet etching technique in a solution of HF, hydrogen peroxide, and deionized water. Different electrical and optical characteristics were obtained according to the shapes and sizes of the SiNWs, which implies that they can serve specific purposes according to their types.
본 논문에서는 미세 상분리된 블럭 공중합체 박막의 특이상에서 금 입자들이 어떻게 자기응집(self assemble) 되고 잘 배열된 패턴을 형성하는지를 살펴보았다. 본 연구에서는 원통형 모폴로지를 갖는 PS-PB-PS 삼블럭 공중합체(30wt% PS) 박막(${\sim}100nm$)을 0.1wt% 톨루엔 용액으로부터 캐스팅하여 고분자 박막 형판(template)으로 사용하였다. 각각의 상이한 용매 증발조건으로부터 PB matrix내에 수평배열 PS cylinder와 수직 PS cylinder를 함께 갖는 막이 얻어졌다. 블럭 공중합체박막의 표면 및 bulk 몰폴로지를 살펴보기 위하여 단면투과전자현미경(TEM)을 사용하였다. Nano-scale 패턴을 얻기 위하여는 소량의 금입자를 블럭 공중합체 박막상에 증발시켰다. 캐스팅된 상태 그 대로의 박막형판이 사용되어질때 금입자들은 표면 장력이 적은 PB상에 우선적으로 자기응집(self as-semble)하여 비교적 잘 배열된 nano-scale의 패턴을 형성하였다. 그러나 열처리(annealing)에 의하여 표면장력이 적은 PB-rich충이 형성된 후에는 금입자의 자기응집에 의한 패턴은 관찰되지 않았다.
제주도의 화산암은 여러 환경적인 요인으로 인하여 크기와 분포가 다양한 기공이 많은 다공상 구조를 보이고 있으며, 지질학적 그리고 역학적 특성 또한 지역마다 차이를 나타내고 있다. 제주도 화산암에 대한 지질학적/화학적 특성에 대한 연구 및 물리적/역학적 특성에 대한 연구는 많은 연구자에 의해 활발히 이루어져 왔지만, 제주도 화산암의 물리적 및 역학적 특성에 대한 종합적인 비교 분석은 이루어져 있지 않다. 본 연구에서는 제주도 화산암에 대하여 기존에 발표된 연구논문 및 보고서를 통하여, 제주도 화산암에 대한 물리 역학적 특성의 상관관계를 종합적으로 비교 분석하였다. 그 결과 흡수율 및 공극률과 겉보기 비중과의 관계는 일반적으로 선형의 관계에 있으며, 여러 환경적 요인에 의해 제주도 화산암은 두 개의 서로 다른 선형근사로 대표시킬 수 있음을 알 수 있었다. 그리고 P파 속도와 S파 속도와의 관계와 흡수율 및 공극률과 건조 상태의 암석에 대한 일축압축강도와의 각각의 관계에 대하여 흡수율 및 공극률과 겉보기 비중과의 두 개의 서로 다른 선형근사 관계를 고려함으로서, P파 속도와 S파 속도와의 관계와 흡수율 및 공극률과 일축압축강도와의 관계를 명확하게 구분할 수 있음을 알 수 있었다.
본 연구는 국내원맥 중 백중밀 및 조경밀의 함수율 9~30%(w.b.) 범위내에서의 물리적 특징 중 산물밀도, 동안식각, 비중, 천립중, 장축길이, 단축길이, 두께 및 면적을 분석하여 함수율간의 상관관계를 구명함으로써 국내밀의 체계적인 수확 후 관리 중 정선, 선별, 이송, 저장 및 가공공정에서의 설계공정 및 기초자료로 활용하고자 연구하였다. 함수율 9~30%(w.b.) 범위내에서의 백중 및 조경밀의 산물밀도는 함수율이 증가할수록 서서히 감소하였으며, 백중밀은 $754kg/m^3$에서 $664kg/m^3$로 감소하였고, 조경밀은 $776.1kg/m^3$에서 $660.0kg/m^3$로 감소하였다. 비중 또한 함수율이 증가할수록 서서히 감소하였으며, 백중밀의 경우 1.2950에서 1.2265로 조경밀은 1.3379에서 1.2671로 측정되었다. 반면에 천립중 및 동안식각은 함수율이 증가할수록 점차 증가하였으며, 동안식각은 함수율 20%(w.b.)이상부터는 거의 변화가 없었다. 천립중은 백중밀보다 조경밀이 크게 측정되었으며 그 값은 32.26~41.51 g(백중밀) 및 45.30~63.07 g(조경밀)로 조경밀이 현저히 크게 측정되었다. 함수율에 따른 장축길이, 단축길이, 두께 및 면적은 함수율이 증가할수록 점차 증가하였다. 백중밀의 장축길이는 6.42 mm에서 7.20 mm로 조경밀은 8.71 mm에서 9.15 mm로 증가하였고, 단축길이 역시 2.90~3.49 mm(백중밀) 및 4.12~4.43 mm(조경밀)으로 증가하였으며, 두께 2.94~3.20 mm(백중밀) 및 3.29~3.63 mm(조경밀), 면적은 $14.13{\sim}19.44mm^2$(백중밀), $27.75{\sim}31.25 mm^2$(조경밀)로 각각 측정되었다. 이로써 함수율에 따른 우리밀의 물리적 특징이 구명되었으며, 이는 우리밀에 적합한 건조저장시설 및 수확 후 관리모델 개발에 도움이 될 것으로 판단된다.
화력발전소에서 배출되는 바닥재와 준설토를 70:30(wt%)로 혼합하고 이를 $6{\pm}2mm$ 크기 구형으로 성형 및 로터리 킬른에서 $1125^{\circ}C$/15 min으로 소성한 뒤, 그 물리적 특성을 평가함으로써 오염 토양을 복원하는데 사용되는 흡착제로의 적용 가능성을 분석하였다. 제조된 소결체(BD)는 100 ${\mu}m$ 이상의 거대 기공 및 10 ${\mu}m$ 이하의 미세기공을 모두 가지고 있었으며, 비표면적, 기공율 그리고 공극율은 각각 $12.0m^2/g$, 30.1%그리고 38.2%이었다. BD 소결체를 한번 분쇄한 시편(BD-C)은 종횡비$\fallingdotseq$2의 부정형이었으나, 부피비중 및 기공크기 분포는 BD와 비슷한 값을 나타내었다. 한편 BD-C 시편의 비표면적, 기공율 그리고 공극율은 BD에 비해 더 우수한 값을 나타내었는데 이는 내부에 존재하던 폐기공(closed pores)이 분쇄과정에서 개기공(open pores)으로 변환되면서 겉보기 부피가 감소했기 때문이다. 제조된 소결체의 영 전하점(IEP)는 약 pH=5이었고 따라서 미생물을 소결체에 결합시킬 때 반응용액의 최적 pH를 알 수 있었다. 본 연구에서 제조된 소결체는 오염 토양 복원에 사용되는 흡착제로의 적용이 가능하며, 더구나 측정된 데이터를 이용하여 BD와 BD-C를 적절한 비율로 혼합하면 적용 상황에 따라 다른 공극율, 기공율 등의 요구 조건을 최적으로 맞출 수 있을 것으로 기대된다.
구상나무(Abies koreana)는 한국의 고유종이지만 기후 변화로 인한 심각한 개체수 감소 현상이 일어나고 있다. 구상나무의 보전을 위한 다양한 연구가 기존에 진행되었지만 구상나무와 근권 세균 군집의 상관관계에 대한 연구는 비교적 미진한 편이기 때문에 추가적인 연구 진행이 필요하다. 식물의 근권 미생물 군집을 구성하는 일부 세균은 식물이 수분, 양분 등이 부족한 환경에서 살아남을 수 있게 돕는다. 또한 계절 변화에 의한 급격한 환경 변화에 대한 식물의 적응력을 향상시켜 줄 가능성이 있다. 본 연구에서는 이러한 세균 군집이 구상나무의 근권에 존재하거나 구상나무의 서식지 유형(자생지, 대체서식지, 고사지, 비재배토양)과 계절 변화(4월, 6월, 9월, 11월)에 따른 군집 구조의 차이가 발생하는지 파악하기 위해 세균의 16S rRNA V4 영역을 대상으로 한 metagenome amplicon sequencing을 진행하였다. 그 결과 우리는 구상나무와 매우 특이적으로 상호작용하는 근권 세균 군집이나 특정 분류군은 찾을 수 없었지만 구상나무 비재배토양에 비해서 구상나무 자생지의 근권 세균 군집이 계절 변화에 의한 변동성이 적게 나타난다는 사실을 알아냈다. 이러한 결과는 구상나무의 근권의 환경이 비재배토양에 비해 상대적으로 안정하다는 것을 보여준다. 그러나 구상나무와 명확하게 상호작용하는 세균 군집이나 분류군을 찾을 수 없었기 때문에 세균 군집 이외의 진균과 같은 기타 근권 미생물 군집들에 대한 추가 연구의 필요성이 제시된다.
Tin(II) acetate와 tin(II) chloride의 주석 precursor를 사용하여 상온에서의 강제 환원 반응으로 주석 나노 입자를 합성시켰다. 0.015 g의 동일한 PVP 양을 첨가한 조건에서 PVP의 분자량이 클수록 비정상적으로 큰 입자들의 생성율이 증가되어 입도 범위가 매우 넓은 주석 나노 입자들이 생성됨을 확인할 수 있었다. 합성된 주석 나노 입자를 함유하는 DEG 용액의 DSC 분석 결과 1차 가열에서는 35 nm 미만 특정 크기 입자들의 수가 충분한 경우에서 DEG의 증발 흡열피크 외에도 특정 크기 입자들의 융점 강하 흡열 피크가 구분되게 검출되었다. 1차 DSC 측정 중 용융된 주석 나노 입자들은 서로 접촉하며 뭉쳐지는 현상이 발생하므로 2차 가열시에는 벌크 주석의 용융 피크에 해당하는 $232^{\circ}C$ 흡열 피크만이 관찰되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.