• 한국전기전자재료학회논문지
• /
• 제15권11호
• /
• pp.963-968
• /
• 2002

In this work, porous silicon (PS) layer is investigated as a sensing material to detect organic vapors such as ethanol (called alcohol), methanol, and acetone in low concentrations. To do this, PS sensors were fabricated. They have a membrane structure and comb-type electrodes were used to detect the change of electrical resistance effectively. PS layer on Si substrates was formed by anodization in HF solution of 25%. From fabricated sensors, current-voltage (Ⅰ-Ⅴ) curves were measured for gases evaporated from 0.1 to 0.5% organic solution concentrations at 36$\^{C}$. As the result, all curves showed rectifying behavior due to a diode structure between Si and the PS layer. The conductance of most sensors increased largely at high voltage of 5V, but the built-in potential on the measured Ⅰ-Ⅴ curve was lowered inversely by the adsorption effect of the organic vapors with high dipole moment.

• 신재생에너지
• /
• 제5권2호
• /
• pp.31-38
• /
• 2009

The performance test of a wind turbine in a wind farm is generally carried out by the owner to verify the power curve of the wind turbine given by the turbine manufacturer. The international electro-technical commission provides the IEC 61400-12-1 standard on "Power performance measurements of electricity producing wind turbines". By using this code, one can easily find the suitable met-mast (meteorological mast) location for the wind data whether a wind farm is potential or already built. In this paper, the valid sectors for wind turbines installed in the HanKyoung wind farm, south-west in Jeju island are analyzed on the basis of the code by considering the wind farm layout. Among these sectors, the optimal met-mast location is presented for the power curve verification of the wind farm.

• Journal of Welding and Joining
• /
• 제32권3호
• /
• pp.34-42
• /
• 2014

Flexible devices have been developed from their rigid, heavy origins to become bendable, stretchable and portable. Such a paper displays, e-skin, textile electronics are emerging research areas and became a mainstream of overall industry. Thin film transistors, diodes and sensors built on plastic sheets, textile and other unconventional substrates have a potential applications in wearable displays, biomedical devices and electronic system. In this review, we describe current trends in technologies for flexible/wearable electronics.

• 한국주거학회논문집
• /
• 제24권1호
• /
• pp.61-68
• /
• 2013

This study tries to provide fundamental policy information for one-room housing by analyzing current living conditions of one-room housing near a university. For this purpose, this study conducts on-site survey as well as residents' survey. The main findings are follows. First, some one-room houses have been converted from single-family houses. Pilotis are often used as parking lots in newly built one-room houses. There are illegal equipments and illegal parkings around one-room village. Second, residents satisfy with proximity to workplace. However, they show strong dissatisfaction with physical environment such as noise, air flow, waste disposals. In particular, they feel very uncomfortable with gloomy lights and fear about potential crime. Third, residents like their independent lives, but complain about narrow living space and unprotected privacy. In addition, many of them feel lonely due to lack of public space in which residents can communicate.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.519-521
• /
• 2003

Within the paper an approach for the automatic extraction and reconstruction of buildings in urban built-up areas base on fusion of high-resolution satellite image and LIDAR data is presented. The presented data fusion scheme is essentially motivated by the fact that image and range data are quite complementary. Raised urban objects are first segmented from the terrain surface in the LIDAR data by making use of the spectral signature derived from satellite image, afterwards building potential regions are initially detected in a hierarchical scheme. A novel 3D building reconstruction model is also presented based on the assumption that most buildings can be approximately decomposed into polyhedral patches. With the constraints of presented building model, 3D edges are used to generate the hypothesis and follow the verification processes and a subsequent logical processing of the primitive geometric patches leads to 3D reconstruction of buildings with good details of shape. The approach is applied on the test sites and shows a good performance, an evaluation is described as well in the paper.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.16-19
• /
• 2007

At an integrated steel mill, raw materials such as coal and iron ore are discharged by ships through multiple unloaders. The discharged raw material is then transported to storage yards through multiple routes established simultaneously on a fairly complicated belt conveyer network. Formulating an efficient unloading schedule is a quite cumbersome task due to the insufficient number of berths and unloaders as well as the potential conflict among routes being used simultaneously. In this paper, we propose a solution approach to the scheduling problem and describe the prototype system that we built as an implementation of our approach.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2003년도 학술발표회논문집(1)
• /
• pp.163-170
• /
• 2003

In this study, paying much attention to notable features obtained from spatial distributions of strongly related indices (precipitable water, convergence of air, convective available potential energy) with precipitation, fatal problems in selecting strongly related indices with observed precipitation in a BAIU season were discussed. These results showed spatial distribution of a predicted index provided alternative and physically consistent interpretation for selecting dominant index for heavy rainfall even if the predicted index did not correlate with observed rainfall at a specific observational point as confirmed by the features of CONV (Convergence) or even if it correlated with observed rainfall as confirmed by those of PW (Precipitable Water). Therefore, dominant meteorological indices of heavy rainfall should be selected according to physically evidenced interpretation on features of spatial distributions of indices, and physically and statistically consistent relationship should be built up.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1435-1439
• /
• 2009

Drainage noise with making think about what they do disturbs neighborhoods live under source of noise. elbow pipe built in the house. the general elbow pipe has a rectangular elbow because of easiness when the plan set up or executing. therefore, free falling fluid impacts on the wall of the elbow pipe almost at one point. in this paper, to disperse the potential energy, the shock decentralizes from tiny area to large area. And It is considered how the characteristics change according to the noise of transformed shape of pipe, then researched the effectiveness of transformed pipe configuration.

• 한국환경복원기술학회지
• /
• 제16권1호
• /
• pp.1-15
• /
• 2013

This study was carried out to make a plan and design the substitute habitat for Kaloula borealis by pre-proposed planning model for wildlife based on wetlands. The habitat characteristics and distribution status in study area, Shingi village in Gunpo, Gyeonggi Province, were surveyed and restoration strategies of habitats including conservation, enhancement were established by conservation value assessment, and the substitute habitat needed to replace was selected. One of three potential substitute habitats in the same watershed to the original habitat was selected by suitable site assessment. And finally the substitute habitat for Kaloula borealis was planned by the planning indices, and some adults and tadpoles were captured and released into built substitute.

• 산업경영시스템학회지
• /
• 제36권1호
• /
• pp.78-85
• /
• 2013

Since the basic built-in-test, prognostic health management (PHM) has evolved into more sophisticated and complex systems with advanced warning and failure detection devices. Aerospace and military systems, manufacturing equipment, structural monitoring, automotive electronic systems and telecommunication systems are examples of fields in which PHM has been fully utilized. Nowadays, the automotive electronic system has become more sophisticated and increasingly dependent on accurate sensors and reliable microprocessors to perform vehicle control functions which help to detect faults and to predict the remaining useful life of automotive parts. As the complication of automotive system increases, the need for intelligent PHM becomes more significant. Given enormous potential to be developed lays ahead, this paper presents findings and discussions on the trends of automotive PHM research with the expectation to offer opportunity for further improving the current technologies and methods to be applied into more advanced applications.