• Advances in Computational Design
• /
• 제3권4호
• /
• pp.319-338
• /
• 2018

High-performing architecture should be designed by taking into account the mutual dependency between the new building and the local context. The performative architecture plays an important role to avert any unforeseen failures after the building has been built; particularly ones related to the microclimate impacts that affect the human comfort. The use of the concept of solar envelopes helps designers to construct the developable mass of the building design considering the solar access and the site obstruction. However, the current analysis method using solar envelopes lack in terms of integrating the detailed information of the existing context during the simulation process. In architectural design, often the current site modelling not only absent in preserving the complex geometry but also information on the surface characteristics. Currently, the emerging applications of point clouds offer a great possibility to overcome these limitations, since they include the attribute information such as XYZ as the position information and RGB as the color information. This study particularly presents a comparative analysis between the manually built 3D models and the models generated from the point cloud data. The modelling comparisons focus on the relevant factors of solar radiation and a set of simulation to calculate the performance indicators regarding selected portions of the models. The experimental results emphasize an introduction of the design approach and the dataset visibility of the 3D existing environments. This paper ultimately aims at improving the current architectural decision of support environment means, by increasing the correspondence between the digital models for performance analysis and the real environments (context of design) during the conceptual design phase.

• Computers and Concrete
• /
• 제33권5호
• /
• pp.595-603
• /
• 2024

In the construction industry, there has been a surge in the implementation of high-tech equipment in recent years. Various technologies are being considered as potential solutions for future construction projects. Building information modeling (BIM), which utilizes advanced equipment, is a promising solution among these technologies. The need for safety inspection has also increased with the aging structures. Nevertheless, traditional safety inspection technology falls short of meeting this demand as it heavily relies on the subjective opinions of workers. This inadequacy highlights the need for advancements in existing maintenance technology. Research on building safety inspection using 3D laser scanners has notably increased. Laser scanners that use light detection and ranging (LiDAR) can quickly and accurately acquire producing information, which can be realized through reverse engineering by modeling point cloud data. This study introduces an innovative evaluation system for building safety using a 3D laser scanner. The system was used to assess the safety of an existing three-story building by implementing a reverse engineering technique. The 3D digital data are obtained from the scanner to detect defects and deflections in and outside the building and to create an as-built BIM. Subsequently, the as-built structural model of the building was generated using the reverse engineering approach and used for structural analysis. The acquired information, including deformations and dimensions, is compared with the expected values to evaluate the effectiveness of the proposed technique.

• 스마트미디어저널
• /
• 제9권3호
• /
• pp.71-79
• /
• 2020

이동통신망은 통화, 메시지, 데이터 전송 등의 서비스를 위하여 많은 사용자들이 전 세계적으로 사용하고 있는 네트워크이다. 이동통신망은 긴급재난망으로도 사용되고 있는 국가적으로 중요한 공공자산이며 이동통신망에서 사이버 공격이나 통신 방해를 이용한 서비스거부공격이 발생할 경우 다양한 피해를 초래할 수 있다. 그러므로 이러한 이동통신망에 대한 안전성 검증이 필수적이나 정해진 몇몇 이동통신사업자들이 망을 구축하여 폐쇄적으로 서비스하고 있고 망의 안전성 검증을 위한 테스트 망이 따로 존재하지 않아 실제로 이동통신망의 코어네트워크를 분석하기는 쉽지 않다. 따라서 본 논문에서는 3GPP 표준을 기반으로 구현하여 오픈소스로 제공되는 OpenAirInterface를 이용하여 가상의 이동통신망을 구축하고 이를 기반으로 코어네트워크 구조와 프로토콜을 분석한다. 특히 단말기에서 전송되는 메시지가 코어네트워크에 미치는 영향을 분석하기 위하여 기지국인 eNodeB와 단말기를 관리하는 MME 사이의 인터페이스인 S1-MME에서의 S1AP 프로토콜 메시지를 분석하여 보안 위협의 실현 가능성을 확인한다.

• Preventive Nutrition and Food Science
• /
• 제16권2호
• /
• pp.117-126
• /
• 2011

This study investigated potential causes of obesity by examining diet and lifestyle factors. The data from the 2008 Korea National Health and Nutrition Survey were statistically analyzed to determine the relative importance of causes of obesity. Because the factors affecting obesity for males and females were significantly different, binary choice logistic models of the male and female subjects were built and estimated separately. Our results show that stress, the irregularity of eating breakfast, and frequency of eating out had the three greatest impacts on male obesity, respectively, and stress, employment status, and age had the greatest impacts on female obesity, in that order.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.441-451
• /
• 1996

The surface meteorological and upper layer meteorological observation carried out to investigate influences of sea breeze effect on lower layer atmosphere at Gori nuclear power plant for 29∼30 July, 1996. According to surface meteorological data, the inflow of sea breeze was occurred 11:30 on 29 July, 10:30-on 30 July, respectively, at observation site. And the meteorological tower data showed that wind direction of sea breeze was identified as south-westerly, and wind speed of 58 m was 2 times stronger than that of 10 m. It is notworthy that surface inversion layer which built from the night time to daybreak of next day was not broken off by seab reeze's inflow for daytime, and strong inversion layer observed at 47∼243 m with moderately stable class (F) by URC. It was found that strong stable layer of potential temperature appeared at that layer, maximum relative humidity observed at the bottom of inversion layer and maximum mixing ratio observed in the low of inversion layer.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.65-70
• /
• 1994

GaAs power MESFETs with 0.8$\mu$m gate lengths are fabricated using image reversal (IR) methods on the wafer with an undoped surface layer grown by MOCVD. The fabricated GaAs power MESFETs with an undoped surface layer show that an ideality factor 1.17, a built-in potential 0.83 V, a pinch-off voltage -2.7 V, a specfic contact resistance 1.21$\times$10$^{5}$ ~3.42$\times$10$^{2}$$\Omega$-cm$^{2}$ and an extrinsic g$_{m}$ = 103.5 mS/mm. The maximum RF output power densities of the 0.8$\mu$m devices are 360 mW/mm and 499 mW/mm, and power added efficiencies 29.67% and 29.05%, for the unit gate width 150$\mu$m and 200$\mu$m at 12 GHz.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.397-402
• /
• 2003

Fracture resistance curves for concerned materials are required in order to perform elastic-plastic fracture mechanical analyses. Fracture resistance curve is built with J-integral values and crack extension values. The objective of this paper is to apply the load ratio method to the measurement of the crack length for the real scale pipe specimen. For these, the fracture test using the real scale pipe specimen and finite element analyses were performed. A 4-point bending jig was manufactured for the pipe test and the direct current potential drop method and the load ratio method was used to measure the crack extension and the length for the real scale pipe test. Finite element analyses about the compliance of the pipe specimen were executed for applying the load ratio method according to the crack length.

• 대한기계학회논문집A
• /
• 제21권12호
• /
• pp.2187-2195
• /
• 1997

A semi-active suspension test system was designed and built for the experimental study. Vehicle parameters were estimated through tests and a quarter-car model was validated by comparing computer simulation results and laboratory test results. Alternative semi-active suspension control laws have been tested using the test system. Modulable damper used in this study is a "reverse" damper with 42 states which is controlled by a stepper motor. Experimental results have shown that semi-active suspensions have potential to improve ride quality of automobiles.tomobiles.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.785-794
• /
• 2015

To obtain low resistance and high efficiency energy-saving ship, minimum total resistance hull form design method is studied based on potential flow theory of wave-making resistance and considering the effects of tail viscous separation. With the sum of wave resistance and viscous resistance as objective functions and the parameters of B-Spline function as design variables, mathematical models are built using Nonlinear Programming Method (NLP) ensuring the basic limit of displacement and considering rear viscous separation. We develop ship lines optimization procedures with intellectual property rights. Series60 is used as parent ship in optimization design to obtain improved ship (Series60-1) theoretically. Then drag tests for the improved ship (Series60-1) is made to get the actual minimum total resistance hull form.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1712-1718
• /
• 2014

Experimental analysis according to the plasma actuator design variables was performed in order to verify the effects of sliding discharge plasma on aerodynamic drag reduction of a high-speed train. For the study, sliding discharge plasma actuator and high-frequency, high-voltage power supply were developed and experimented to figure out the best design variables for highest ionic wind velocity which could reduce the drag force. And then, 5% reduced-scale model of a high-speed train was built for wind tunnel test to verify it. From the results, it was confirmed that sliding discharge plasma had contribution to reduce the drag force and it had the potential to be applied to real-scale trains.