• Journal of the Korean Geotechnical Society
• /
• v.25 no.1
• /
• pp.5-19
• /
• 2009

Most of earthquake-induced geotechnical hazards have been caused by the site effects relating to the amplification of ground motion, which is strongly influenced by the local geologic conditions such as soil thickness or bedrock depth and soil stiffness. In this study, an integrated GIS-based information system for geotechnical data, called geotechnical information system (GTIS), was constructed to establish a regional counterplan against earthquake-induced hazards at an urban area of Daejeon, which is represented as a hub of research and development in Korea. To build the GTIS for the area concerned, pre-existing geotechnical data collections were performed across the extended area including the study area and site visits were additionally carried out to acquire surface geo-knowledge data. For practical application of the GTIS used to estimate the site effects at the area concerned, seismic zoning map of the site period was created and presented as regional synthetic strategy for earthquake-induced hazards prediction. In addition, seismic zonation for site classification according to the spatial distribution of the site period was also performed to determine the site amplification coefficients for seismic design and seismic performance evaluation at any site in the study area. Based on this case study on seismic zonations in Daejeon, it was verified that the GIS-based GTIS was very useful for the regional prediction of seismic hazards and also the decision support for seismic hazard mitigation.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.12
• /
• pp.871-879
• /
• 2017

The purpose of this study is to propose a Busan tourism industry in which the 2016 OECD Tourism policy and ICT convergence platform are applied. OECD proposed 3 policies to promote the tourism industry: First, to maintain the competitiveness of the tourism industry as well as improve its efficiency and sustainability, second, to establish a seamless traffic system, and third, to build a response to the sharing economy. Centering on the OECD's three policies, we propose the developmental possibilities of tourism in Busan. At the same time, we suggest the necessity to build an ICT convergence platform that will help foster the industry. In building an ICT convergence platform, we especially focus on the necessity of: 1. Sharing and creating experience-based interactive contents on the software side, and 2. Developing high quality user experience (UX) and providing a data analysis-based customized service on the hardware side. In addition, we insist on the establishment of the Tourism Promotion Agency for the continuous performance and management of Busan tourism industry. The study ultimately suggests that the construction of ICT convergence platform based on OECD tourism policy can result in the expected outcomes of high effects with low cost for both consumers and suppliers related to the tourism industry.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.17-28
• /
• 2023

This study aimed to verify the validity of the evaluation items and weight determination of the indoor environmental safety area, which has the most frequent accidents, among the safety certification evaluations of educational facilities by the Ministry of Education of the Republic of Korea, which has been conducted since May 2021. As a preceding study, the evaluation items of the school safety evaluation checklist being implemented in the US state of Vermont were compared, and the causes of accidents judged by teachers in the accident experiences written by 200 Korean teachers were compared with the safety certification evaluation items belonged to the Ministry of Education. In addition, research literature using the AHP analysis technique on safety risks of elementary and secondary schools in China and safety evaluation index study cases of 539 elementary school children in Indonesia were analyzed. Through these preceding studies, measures to add and adjust evaluation items were derived and the validity and importance rankings of evaluation items were calculated through AHP questionnaires to teachers and safety experts. In addition, a survey was conducted on 104 ordinary people to verify the results of expert analysis. As a result of expert AHP analysis, 'safety education and disaster response training (.396)' was the highest priority for the relative importance of the first layer, followed by 'safety measures (.387)' and 'building materials'. Safety (.216)' was found to be the highest priority. In the overall importance ranking of the 13 second-tier screening items, safety accident prevention education had the highest priority and disaster preparedness training ranked second, proving that the Ministry of Education's review weight was underestimated. In addition, slip and collision accident countermeasures, which were not in the existing Ministry of Education review items, ranked 4th, laboratory practice room safety measures ranked 6th, and sanitation, cleanliness, hazardous substance management, and cafeteria/cooking room safety measures ranked 9th, indicating a significant level of importance. Referring to the importance ranking, which is the result of this study, it is suggested that it is necessary to review the weight of each review item again.

• The Korean Journal of Franchise Management
• /
• v.7 no.1
• /
• pp.31-44
• /
• 2016

Purpose - This study aims to examine different impacts of franchisor's leadership and franchisee's marketing efforts on franchisee dissatisfaction and switching intentions, and to investigate how franchisee dissatisfaction plays a mediating role in the relationship between these constructs. This study attempted to fill the gap in the literature by treating the franchisee dissatisfaction as a mediator in the relationship between these constructs, identify how franchisor's leadership and franchisee's marketing efforts have effects on franchisee dissatisfaction, in turn, reduce switching intentions, and provide the managerial implications for building a long-term relationship to achieve mutual goals between franchisors and franchisees Research design, data, and methodology - In order to test the hypotheses, the data were collected from franchisees in Seoul and Gyeonggi Province. The franchisee owners were informed about the purpose of this study by the trained interviewers. The respondents received a letter introducing the purpose of this study and another letter that the owners wrote to encourage their active participation. Among the 300 questionnaires distributed, 260 (86.7%) questionnaires were returned. Of those collected questionnaires, 6 uncompleted responses were excluded, and 254 questionnaires with an effective response rate of 84.7% were coded and analyzed using frequency, confirmatory factor analysis, and correlations analysis, and structural equation modeling with SPSS 21.0 and SmartPLS 3.0. Results - The findings of the study are as follows. First, franchisor leadership had a negative effect on franchisee dissatisfaction, but franchisee marketing efforts did not have a significant effect on franchisee dissatisfaction. Second, franchisee dissatisfaction had a positive effect on switching intentions. Third, franchisor leadership had a negative effect on switching intentions, but franchisee marketing efforts did not have a significant effect on switching intentions. Conclusions - This study researched the franchisor's leadership as a single factor of transformational leadership. Thus, it may have limits in measuring leadership. Future studies shall include emotional, loyal, and transactional leadership. In addition, the future studies shall also research the effect of franchisor's leadership and franchisees' marketing efforts on dissatisfaction and switching intentions. For example, the franchisor's relationship-oriented efforts can be a crucial parameter that reduces dissatisfaction and switching intentions.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.569-577
• /
• 2023

This study selected seven carbon-neutral villages, considering the characteristics of each region, including all five administrative districts of Changwon City, and proposed activation plans based on business evaluations through surveys of local residents and FGIs with leaders. The analysis showed that carbon-neutral education was the most important factor for activating carbon-neutral villages, with a response rate of 91.9% for 17 multiple-choice questions, followed by legal (ordinance) arrangements at 79.3% and village organization building at 74.1%. Based on this, the following activation plans through the participation of residents who are involved in the project of creating a carbon-neutral village in Changwon City were proposed. First, the characteristics of each carbon-neutral village model were classified into a resource circulation-based model, an environmental creation-based model, an environmental education and experience event-based model, and an energy efficiency-based model. Second, it is necessary to create and present carbon-neutral village growth stage guidelines for the growth of carbon-neutral villages. Third, manuals and teaching materials related to carbon neutrality, such as theories, issues, and practices, need to be produced and distributed for leaders and activists to easily apply and access for self-government operation of the village. Finally, if a carbon-neutral support center that is legally installable in Changwon City is established, it is expected that the lives of local residents will become more sustainable for carbon-neutral living in preparation for climate crises.

• Steel and Composite Structures
• /
• v.48 no.1
• /
• pp.43-57
• /
• 2023

The impacts of waste tire rubber (WTR) on the bending conduct of reinforced concrete beams (RCBs) are investigated in visualization of experimental tests and 3D finite element model (FEM) using both ANSYS and SAP2000. Several WTR rates are used in total 4 various full scale RCBs to observe the impact of WTR rate on the rupture and bending conduct of RCBs. For this purpose, the volumetric ratios (Vf) of WTR were chosen to change to 0%, 2.5%, 5% and 7.5% in the whole concrete. In relation to experimental test consequences, bending and rupture behaviors of the RCBs are observed. The best performance among the beams was observed in the beams with 2.5% WTR. Furthermore, as stated by test consequences, it is noticed that while WTR rate in the RCBs is improved, max. bending in the RCBs rises. For test consequences, it is clearly recognized as WTR rate in the RCB mixture is improved from 0% to 2.5%, deformation value in the RCB remarkably rises from 3.89 cm to 7.69 cm. This consequence is markedly recognized that WTR rates have a favorable result on deformation values in the RCBs. Furthermore, experimental tests are compared to 3D FEM consequences via using ANSYS software. In the ANSYS, special element types are formed and nonlinear multilinear misses plasticity material model and bilinear misses plasticity material model are chosen for concrete and compression and tension elements. As a consequence, it is noticed that each WTR rates in the RCBs mixture have dissimilar bending and rupture impacts on the RCBs. Then, to observe the impacts of WTR rate on the constructions under near-fault ground motions, a reinforced-concrete building was modelled via using SAP2000 software using 3-D model of the construction to complete nonlinear static analysis. Beam, column, steel haunch elements are modeled as nonlinear frame elements. Consequently, the seismic impacts of WTR rate on the lateral motions of each floor are obviously investigated particularly. Considering reduction in weight of structure and capacity of the members with using waste tire rubber, 2.5% of WTR resulted in the best performance while the construction is subjected to near fault earthquakes. Moreover, it is noticeably recognized that WTR rate has opposing influences on the seismic displacement behavior of the RC constructions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.6
• /
• pp.115-125
• /
• 2022

As the digital economy has emerged as a means of building a new business order and creating new values, the number of small business owners participating in digital platforms is gradually increasing. This study aims to check whether small business owners participating in the digital platform are being helped to properly respond to the market environment and establish and implement strategies necessary for growth through learning within the platform. To this end, this study attempted to examine the effect of the absorptive capacity of small business owners using e-commerce platforms on market orientation and the moderating effect of vicarious learning and experiential learning, which are two types of learning within the platform. As a result of verifying the hypothesis through the survey, it was found that the absorption capacity of small business owners using digital platforms positively affected their market orientation. In addition, as a result of the moderating effect analysis, it was found that vicarious learning within the platform strengthens the relationship between absorptive capacity and market orientation. This result implies that small business owners can not only prepare for market uncertainties through indirect learning (vicarious learning) but also establish strategies to provide products and services that meet the market's needs. On the other hand, the effect of experiential learning was found to lower market orientation, which means that previous business experiences can rather lower attention to the environment. The significance and implications of the study were presented.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.1-9
• /
• 2024

This study proposes a multi-scale template matching technique with image pyramids (TMI) to measure structural dynamic displacement using a vision sensor under atmospheric turbulence conditions and evaluates its displacement measurement performance. To evaluate displacement measurement performance according to distance, the three-story shear structure was designed, and an FHD camera was prepared to measure structural response. The initial measurement distance was set at 10m, and increased with an increment of 10m up to 40m. The atmospheric disturbance was generated using a heating plate under indoor illuminance condition, and the image was distorted by the optical turbulence. Through preliminary experiments, the feasibility of displacement measurement of the feature point-based displacement measurement method and the proposed method during atmospheric disturbances were compared and verified, and the verification results showed a low measurement error rate of the proposed method. As a result of evaluating displacement measurement performance in an atmospheric disturbance environment, there was no significant difference in displacement measurement performance for TMI using an artificial target depending on the presence or absence of atmospheric disturbance. However, when natural targets were used, RMSE increased significantly at shooting distances of 20 m or more, showing the operating limitations of the proposed technique. This indicates that the resolution of the natural target decreases as the shooting distance increases, and image distortion due to atmospheric disturbance causes errors in template image estimation, resulting in a high displacement measurement error.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.74-82
• /
• 2024

In this study, feature point detection and displacement measurement performance depending on feature extraction algorithms were compared and analyzed according to environmental changes and target types in the feature point-based displacement measurement algorithm. A three-story frame structure was designed for performance evaluation, and the displacement response of the structure was digitized into FHD (1920×1080) resolution. For performance analysis, the initial measurement distance was set to 10m, and increased up to 40m with an increment of 10m. During the experiments, illuminance was fixed to 450lux or 120lux. The artificial and natural targets mounted on the structure were set as regions of interest and used for feature point detection. Various feature detection algorithms were implemented for performance comparisons. As a result of the feature point detection performance analysis, the Shi-Tomasi corner and KAZE algorithm were found that they were robust to the target type, illuminance change, and increase in measurement distance. The displacement measurement accuracy using those two algorithms was also the highest. However, when using natural targets, the displacement measurement accuracy is lower than that of artificial targets. This indicated the limitation in extracting feature points as the resolution of the natural target decreased as the measurement distance increased.

• Computers and Concrete
• /
• v.33 no.5
• /
• pp.497-507
• /
• 2024

In squat reinforced concrete walls, the displacement capacity for lateral deformation is low and the ability to resist the axial load can quickly be lost, generating collapse. This work consists of testing two squat reinforced concrete walls. One of the specimens is built with conventional detailing of reinforced concrete walls, while the second specimen is built applying an alternative design, including stirrups along the diagonal of the wall to improve its ductility. This solution differs from the detailing of beams or coupling elements that suggest building elements equivalent to columns located diagonally in the element. The dimensions of both specimens correspond to a wall with a low aspect ratio (1:1), where the height and length of the specimen are 1.4 m, with a thickness of 120 mm. The alternative wall included stirrups placed diagonally covering approximately 25% of the diagonal strut of the wall with alternative detailing. The walls were tested under a constant axial load of 0.1f'cAg and a cyclic lateral displacement was applied in the upper part of the wall. The results indicate that the lateral strength is almost identical between both specimens. On the other hand, the lateral displacement capacity increased by 25% with the alternative detailing, but it was also able to maintain the 3 complete hysteretic cycles up to a drift of 2.5%, reaching longitudinal reinforcement fracture, while the base specimen only reached the first cycle of 2% with rapid degradation due to failure of the diagonal compression strut. The alternative design also allows 46% more energy dissipation than the conventional design. A model was used to capture the global response, correctly representing the observed behavior. A parametric study with the model, varying the reinforcement amount and aspect ratio, was performed, indicating that the effectiveness of the alternative detailing can double de drift capacity for the case with a low aspect ratio (1.1) and a large longitudinal steel amount (1% in the web, 5% in the boundary), which decreases with lower amounts of longitudinal reinforcement and with the increment of aspect ratio, indicating that the alternative detailing approach is reasonable for walls with an aspect ratio up to 2, especially if the amount of longitudinal reinforcement is high.