• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1540-1547
• /
• 2013

국가 에너지 소비의 25%를 차지하는 건물에너지의 저감과 귀농인구의 증가에 따른 저에너지 친환경 주택모델의 수요 충족을 위해 EnergyPlus를 사용하여 PV 시스템이 적용된 농어촌 주택 표준모델의 건물에너지요구량을 기반으로 경제성 분석을 하였다. 2가지 타입의 PV 시스템이 적용되었고 발전된 전력을 건물의 냉방기기와 전기기기, 그리고 난방기기에 사용하였다. 계산에 사용된 주택의 연간 건물에너지요구량은 난방이 냉방에 비해 7배 크게 나타났다. Case1과 Case2로 나누어 PV 시스템의 경제성분석을 실시한 결과, Case1은 냉난방 및 전기기기에 발전된 전력을 사용하고 판매하는 것이, Case2는 냉방과 전기기기에만 전력을 사용하고 전량 판매하는 것이 경제적으로 유리한 것으로 판단된다. 하지만, 향후 전력 판매가격과 가스가격이 변동되면 결과는 달라질 수 있다. 초기투자비용은 Case1이 약 13년, Case2는 약 11년이 지나면 회수되는 것으로 나타났다. Case2가 초기설치비용이 비싸지만 회수기간이 지나면 Case1보다 약 3배 더 많은 이익을 얻을 수 있어 수명연한인 25년 이상 사용 시 경제성 측면에서 유리할 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제11권5호
• /
• pp.89-98
• /
• 1999

This paper evaluates nonlinear response characteristics of precast concrete frame buildings. where plastics hinging occurs in the precast connection. Designs were developed for buildings of 5, 10 and 15 stories in hight for moderate seismic risk regions of the U. S. The responses of the buildings were analyzed using DRAIN-2DX and following Nonlinear static analysis procedure of ATC 19. The main variables of the analyses were the strength and stiffness of the connection. Also, for the analysis, the bi-linear response model, developed and inserted into the DRAIN-2DX program by Shan Shi and D. Fouch, was used. With the results of analysis, the deformation demands of the connection of precast concrete frame buildings are proposed by using equal-dissipated energy capacity. It was shown that the strength of the buildings as well as their displacement capacities decreased with the decrease of either the strength or stiffness in the connections. Therefore such changes also require reductions in the response modification factors for such buildings. However, if the precast concrete frame building has plastic hinging in the connection, and has a more ductile connection than the monolithic frame building, then no reduction in R may be necessary. The deformation demand required of the connection to achieve that condition is evaluated and a simple relation is suggested in the paper.

• 응용통계연구
• /
• 제32권3호
• /
• pp.405-421
• /
• 2019

얼마나 많은 에너지를 사용하느냐에 대한 예측은 사회에서 중요한 이슈이다. 특히 주거 건물은 건물의 특성상 다른 건물에 비해 예측하기 힘들다. 본 논문에서는 주거용 건물의 전력 사용량에 대한 시계열 분석의 방법들을 설명하고자 한다. 일반적으로 온도는 전력 사용량과 밀접한 관련이 있다고 알려져 있다. 변수들 사이에 공적분 관계가 존재한다면, 시간에 따른 오차를 조정하는 방법인 오차수정모형을 적용한다. 전력 사용량과 온도를 포함한 변수들 사이에 공적분 관계가 있음을 보이고, 새로운 온도 반응 함수를 정의하여 온도 효과를 고려한 오차수정모형을 적용하고자 한다.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4179-4188
• /
• 2021

This study identifies efficient earthquake intensity measures (IMs) for seismic performances and fragility evaluations of the reactor containment building (RCB) in the advanced power reactor 1400 (APR1400) nuclear power plant (NPP). The computational model of RCB is constructed using the beam-truss model (BTM) for nonlinear analyses. A total of 90 ground motion records and 20 different IMs are employed for numerical analyses. A series of nonlinear time-history analyses are performed to monitor maximum floor displacements and accelerations of RCB. Then, probabilistic seismic demand models of RCB are developed for each IM. Statistical parameters including coefficient of determination (R²), dispersion (i.e. standard deviation), practicality, and proficiency are calculated to recognize strongly correlated IMs with the seismic performance of the NPP structure. The numerical results show that the optimal IMs are spectral acceleration, spectral velocity, spectral displacement at the fundamental period, acceleration spectrum intensity, effective peak acceleration, peak ground acceleration, A95, and sustained maximum acceleration. Moreover, weakly related IMs to the seismic performance of RCB are peak ground displacement, root-mean-square of displacement, specific energy density, root-mean-square of velocity, peak ground velocity, Housner intensity, velocity spectrum intensity, and sustained maximum velocity. Finally, a set of fragility curves of RCB are developed for optimal IMs.

• 대한기계학회논문집B
• /
• 제36권6호
• /
• pp.669-674
• /
• 2012

최근에 준공된 디큐브시티는 사무용, 상업용, 숙박용 및 관람집회용 등 4개의 시설이 공존하는 복합건물이다. 이 건물에는 필요로 하는 전기와 증기, 온수 및 냉수를 공급하기 위해 구역형 에너지공급시스템(Community energy supply system)이 설치되었다. 다양한 건물설비를 효과적으로 운영하기 위해 건물에너지관리시스템(Building energy management system)의 설치를 검토하고 있다. 본 연구에서는 3개의 열병합발전시스템을 비롯하여 7대의 증기보일러, 2대의 중온수보일러와 2대의 흡수식냉동기 및 4대의 터보냉동기 등으로 구성되는 구역형 에너지공급시스템의 최적 운전 및 설계방법을 검토하였다. 결과로서 에너지 수요변화에 따른 구역형 에너지공급시스템의 최적 운전방법과 계절적 운전조건의 변화가 시스템의 경제성에 미치는 영향을 규명하였다. 또 시설별 규모에 따라 결정되는 에너지 수요가 건물 전체의 에너지 소비에 미치는 영향도 분석하였다.

• 한국지열·수열에너지학회논문집
• /
• 제19권4호
• /
• pp.1-7
• /
• 2023

In Korea, it is also mandatory for most buildings to receive energy efficiency rating certification from 2020 for the purpose of reducing greenhouse gas emissions and expanding green buildings. However, the issue of the accuracy of the ECO2 program continues to be raised, and comparisons have been made with dynamic energy analysis programs in a single type of building according to a single area. However, comparisons between multiple building types and multiple areas are insufficient. Therefore, in this study, cooling and heating loads according to multiple building types and multiple areas were analyzed through ECO2 and TRNSYS programs. The regions were supposed to be Seoul, Daejeon, Gwangju, and Busan and the building types were supposed to be office buildings and apartment houses. The annual average building load values from ECO2 were higher than those from TRNSYS. Among residential buildings across the four regions, the largest discrepancy was 41.4% in Seoul. Conversely, for commercial buildings, the most significant difference in annual average loads was noted in Gwangju, at 37.9%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1483-1485
• /
• 2004

Photovoltaic(PV) technology is a popular part of building vocabulary. It can be used today on both existing and new buildings. Its use in the building envelope is very varied and open ways, such as roofing materials, facades, skylights and shading systems, for creative designers. So, to activate this systems demand appropriate sources of information, performance data of elements and design tools offering architects and designer. Therefore this paper describe application elements for BIPV system and then predict improvement in the generated electric power performance of balcony BIPV system.

• 한국태양에너지학회 논문집
• /
• 제37권6호
• /
• pp.51-58
• /
• 2017

This study proposes an appropriate level of insulation standards by region through annual heating energy requirements according to regional climate. The reference buildings out of non-residential buildings approved by the energy saving design standard for buildings were derived in the previous study, in which the annual heating energy requirements for each building were as follows when the insulation standard for building members in four regions (Pyeongchang, Seoul, Gwang-ju, and Jeju) suggested by the energy saving design standard for buildings: $29.8kWh/m^2$ in Pyeongchang, $17.5kWh/m^2$ in Seoul, $14.4kWh/m^2$ in Gwangju, and $16.7kWh/m^2$ in Jeju. To satisfy the passive level of insulation standards for these buildings, in case that roof/floor of buildings in Pyeongchang and Seoul was $0.2W/m^2K$, the minimum window thermal transmittance should satisfy $0.9W/m^2K$ and the minimum wall thermal transmittance should satisfy $0.1W/m^2K$ in the case of Pyeongchang. On the other hand, the minimum window thermal transmittance should satisfy $1.5W/m^2K$ and the minimum wall thermal transmittance should satisfy $0.14W/m^2K$ in the case of Seoul. For Jeju regions, the minimum wall thermal transmittance should satisfy $0.34W/m^2K$ to meet the passive level of buildings. Based on the above results, the thermal transmittance of each member by region should take the outdoor climate condition of the region into consideration to satisfy the passive level of buildings.

• Earthquakes and Structures
• /
• 제16권4호
• /
• pp.401-413
• /
• 2019

The concept of base isolation for equipment is well known. Its application in buildings and structures is rather challenging. Introduction of horizontal flexibility at the base helps in proper energy dissipation at the base level thus reducing the seismic demand of the super structure to be considered during design. The present study shows the results of a series of numerical simulation studies on seismic responses of secondary system (SS) housed in non-isolated and base-isolated primary structures (PS) including equipment-structure interactions. For this study the primary structure consists of two similar single bay three-store reinforced cement concrete (RCC) Frame building, one non-isolated with conventional foundation and another base isolated with Lead plug bearings (LPB) constructed at IIT Guwahati, while the secondary system is modeled as a steel frame. Time period of the base isolated building is higher than the fixed building. Due to the presence of isolator, Acceleration response is significantly reduced in both (X and Y) direction of Building. It have been found that when compared to fixed base building, the base isolated building gives better performance in high seismic prone areas.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.179-184
• /
• 2011

The development of new energy has attracted consideration attention due to the high oil price and environmental problems. In advanced country, they have tried to carry out a long range plan for energy. We need to develop new energy for Low Carbon Green Growth in Korea. The building is 30% among ratio of energy consumption in Korea. And in the past, heating energy was high ratio for energy using at home. But recently, the demand for cooling energy keeps growing due to rising average temperature on the earth and improvement of life quality. In this situation, the energy of lake water and ocean water has studied to utilize in advanced country because of low temperature at underwater. But the study for deep water is still a lot left to do. In this study, we analyzed district cooling system and the present condition. Analyzing the deep lake water cooling system in Toronto, we found an application of district cooling system using deep ocean water. Deep lake water uses heat source for district cooling and water source for city in Toronto. So reducing the initial cost, this city had economic effect. When DLWC was applied at existing building, the heat exchanger was installed instead of cooling tower and refrigerator. And the heat exchanger used to connect main pipe with cool water on city. System using deep ocean water can be applied as a similar way to supply cool water from lake to building.