• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.6
• /
• pp.1247-1257
• /
• 2015

The river water intake system composed of the filter block, without installation of weirs in a channel, was proposed. To apply it to rivers, analysis of hydraulic characteristics is needed. In this study, the hydraulic experiment on the characteristics of flowrate passing through the river water intake system was carried out. The filter block was produced using riprap and stainless steel bead at the channel bottom. The experiment was carried out under various flow conditions and the flowrate passing through the intake system was measured. As the water depth approaching the intake system became deeper, the flowrate diverting to the intake system increased. As the Froude number increased, the flowrate diverting to the intake system decreased. The same trend was shown regardless of the characteristics of a filter block in the intake system. A constant discharge coefficient was shown regardless of the Froude number but it changed according to the size of a riprap and a stainless steel bead in the filter block. It was found that the discharge coefficient increases with the 0.6 power of the material size.

• The Microorganisms and Industry
• /
• v.19 no.4
• /
• pp.62-67
• /
• 1993

의약품을 중심으로 한 광학활성 생리활성물질의 제조 즉, 정밀유기합성은 정밀화학의 꽃이라 할 수 있다. 이러한 광학활성물질은 통상의 유기화학적 수법으로 합성하면 라세미체로 얻어지고 광학활성체로 얻을 수 없다. 그래서 최근 chiral 중심을 가지는 간단한 화합물(광학활성합성원료-chiral building block, chiral synthon)을 원료로 해서 입체 선택적으로 반응을 조절함으로써 다양한 광학활성표적 화합물을 합성하는 방법이 활발히 진행되고 있다. chiral building block의 제조 방법을 살펴보기로하자.

• 한국IT서비스학회:학술대회논문집
• /
• 2002.06a
• /
• pp.141-146
• /
• 2002

AIN CS-3를 기반으로 하는 IMT-2000 망은 지능망의 구성 요소들과 통합 및 연동을 통하여 기존에 개발되었거나 앞으로 개발될 유선 지능망의 서비스들을 쉽게 수용할 수 있게 된다. 본 논문에서는 IMT-2000 및 IMT-2000과 연동되는 타 네트워크의 상이한 플랫폼 환경의 개발환경 및 향후 유지보수과정에서 발생 할 것으로 예측되는 TMN 시스템 내 에이전트의 Q3 인터페이스 구현상의 표준을 이룰 수 없다는 등의 문제점을 해결하기 위하여 I-Farmer 모델 및 I-Farmer 방법론을 제안하였다.

• KIEAE Journal
• /
• v.8 no.3
• /
• pp.19-26
• /
• 2008

The purpose of this study is to analyze the legislation types and prescriptions of American earth building codes. The process of this study is as follows: (1) To understand the legislation background of American earth building codes, this study investigated the history and present state of earth building techniques which is used in USA. (2) To understand the legislation method and procedure of American earth building codes, this study investigated the legislation system of American building codes and the process of model building codes development and adoption. (3) To provide basic data for the legislation of Korean earth building codes or guidelines, this study analyzed American earth building codes about adobe, compressed earth block and rammed earth. The result of this study is as follows: (1) To meet need of a single coordinated set of national model building codes in the United States, the nation's three model code groups decided to form the International Code Council and the first edition of the International Building Code was published in 1997. In the International Building Code there are prescriptions on adobe construction. (2) There are three legislation types of earth building codes in USA. First is to use prescriptions of International Building Code on adobe construction. Second is that State governments establish and issue a separate document under its own title. The last is that local jurisdictions adopt International Building Code with amendments or additional rules. (3) On the base of analysis of American earth building codes, this study proposed the legislation process and direction of Korean earth building codes and guidelines.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.170-175
• /
• 2009

Apartment housing block has been spreaded according to rapid economic development and urbanization in Korea. A parking lot is located at underground, artificial ground is inevitably created in apartment housing block. Artificial ground creates different thermal environment compared to natural ground, because the composition and coverage of artificial ground are diverse. In this study, the effect of the artificial ground on building thermal environment will be disscussed by simulation. Considering the result of simulation, surface albedo is more important for building energy performance. A purpose of this study is to examine how the characteristic of surface effect to thermal environment, and to develop design method for sustainable outdoor space.

• Journal of the Korean Solar Energy Society
• /
• v.32 no.spc3
• /
• pp.185-193
• /
• 2012

Recently rapid urbanization facilitates development of high-rise building complex including apartment and office building in urban area. Many problems related with high -rise building are reported. Especially, unpleasant strong winds in pedestrian area are frequently encountered around the high-rise building. CFD simulation methods are used to analyze the wind environment of pedestrian level in high-rise building block. However, the results show differences between CFD and measurement. This difference is attributed to improper use of CFD. Conventional CFD simulation for wind environment around high-rise building does not describe the effect of trees, shrubs and plants near ground which affect the wind environment of pedestrian level. Canopy model can be used to reproduce the aerodynamic effects of trees, shrubs and plants near ground. In this paper, CFD simulation methods coupled with the tree canopy model to predict wind environment of pedestrian level in high-rise residential building block were suggested and the validity was analyzed by comparison between measurement and CFD results.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.25-26
• /
• 2020

During the molding process of the existing interlocking block, the pigment is firstly laid, and cement is poured on the pigment secondly to give vibration. Interlocking blocks made of conventional cement are entirely dark where the pigment area is removed. On the other hand, when looking at the mortar with oyster shells added, the color is closer to that of the existing cement mortar. Therefore, if an interlocking block is produced by adding a pigment to a mortar with an oyster shell added, it is considered that the amount of pigment is less than that of the existing interlocking block. This study is a basic study of interlocking blocks. To investigate the strength characteristics of mortar using oyster shell powder as aggregate, W/C is 25%, 50%, oyster shell replacement rate is 0%, 25%, 50%, 75%, 100% was substituted to make a mortar and its strength change was studied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.521-521
• /
• 2016

상수도 관망은 수원에서 수요절점까지 물을 안정적으로 공급하는 것을 목표로 한다. 상수도 관망의 최적설계는 수리학적 제한조건 (절점의 수압, 관로의 유속)을 만족하는 범위에서 비용을 최소화하는 설계안을 얻는 것으로 Savic and Walters (1997)는 유전 알고리즘 (Genetic Algorithms, Holland 1975)을 적용한 상수도 관망 설계 프로그램인 GANET를 제안하였고, Maier et al. (1996)은 개미군집알고리즘 (Ant Colony Optimization Algorithm, Dorigo et al. 1996)을 상수도 관망 최적설계에 적용한 후 그 결과가 유전 알고리즘에 비해 우수함을 증명하는 등 상수도 관망 최적설계에 관한 연구가 활발히 진행되어 오고 있다. 유전알고리즘은 선택, 교차, 돌연변이의 반복계산 과정을 통하여 최적해를 찾는 최적화 기법이다. 이 과정에서 결정변수는 유전자 (Gene)의 집합으로 표현되며, 염색체 (Chromosome) 내에서 근접한 유전 인자들은 일종의 Building Block을 형성하게 된다. Building Block은 좋은 해를 갖는 유전 인자를 높은 확률로 보관하여 지역해에 빠질 가능성을 줄이는 반면, 유전형 (Genotype)이 표현형 (Phenotype)을 충분히 모방하여 표현하지 못한 경우 오히려 최적해의 탐색을 방해할 수 있다는 한계점을 갖는다. 유전 알고리즘을 상수도 관망 최적설계에 적용하였을 때에도 이 한계점은 여실히 드러난다. 관로의 관경을 결정변수로 설정한 후 유전형으로 표현하였을 때, 관망도 상에서 근접하지 않은 두 관로가 염색체 내에서 연속으로 나열된다면 두 관로 간의 연관성이 실제보다 크게 고려되기 때문이다. 한편, 하모니써치 (Harmony Search, Geem et al. 2001) 알고리즘은 즉흥 연주 (Improvisation)를 통해 최상의 화음을 만들어내는 현상으로부터 착안하여 만들어진 최적화기법으로 연산 기법은 무작위선택, 기억회상, 피치조정 등으로 구성되어 있으며, 결정변수에 해당하는 연주자가 독립적으로 행동하며 해를 탐색한다는 점에서 유전알고리즘과 큰 차이를 갖는다. 본 연구에서는 유전알고리즘의 Building Block에 의해 발생하는 오류를 개선하고자, 상수도 관망 최적설계 연구에 많이 사용되는 Hanoi 관망 (Fujiwara and Khang 1990) 관로의 정렬 순서를 여러 가지 기준으로 설정하여 관망데이터를 구축한 후 하모니써치와 유전 알고리즘을 적용하여 최적화를 수행하였고 그 결과를 비교하였다. 그 결과 유전 알고리즘과 달리 하모니써치 알고리즘의 경우, 관로의 나열 순서와 상관없이 우수한 최적해 탐색 결과를 보이는 것을 확인할 수 있었다.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.174-181
• /
• 2004

We will introduce a method of construction of super-block curtain wall applied to Tower Palace III which is the highest high-rise complex building in Korea. Up-up method is utilized on Tower Palace III to shorten the term of works and it is that the curtain walls for the belt wall part are installed after the rests. The belt wall structure increases the horizontal structural stiffness of the building. The method of construction of super-block curtain wall is developed and used to raise and install the curtain wails of the belt wall floor. It is that the large block of curtain walls corresponding to three stories is fabricated on the ground in advance and the block is installed at a time by a tower crane. Specialized installing equipment :,s newly developed and applied to install the super-block. curtain wail. The curtain wall of the upper floor of the belt wall part is installed after the super-block. The installing equipment for this floor is developed utilizing a mini excavator and vacuum suctions. The application of this method had made it possible to omit the setting up the scaffold and financial profits such as the shortening of the terms of works was realized. The safety of works was secured and the productivity was also improved.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.6 no.2
• /
• pp.803-808
• /
• 1964

In this experiment, it was attempted to determine the thermal conductivities of earth block materials which are recently much available for farm building constructions in Korea as lower cost building materials. For this experiment, two kinds of earth block materials were sampled. One of them was pure earth and the other was cementstabilized earth with a ratio of earth to cement by volume, 20 to 1. Cylindrical sections of specimen surrounding a steel pipe(I.D. =1 inch) were used. A resistance neater in the pipe and thermometers for the measurement of radial temperature distribution were installed as shown in Fig. 1 and photograph 1. The heat which flows through the pipe and the sample was produced by passing a current through a resistance wire stretched along the pipe axis. The complete apparatus used in this experiment is schematically shown in Fig. 1.