• 한국의류학회지
• /
• 제18권4호
• /
• pp.515-523
• /
• 1994

This study was accomplished to investigate the mechanical properties and handle according to treatment processes and brushing condition. For this study, grey fabrics of blended ratio of polyester 65% : cotton 35% were bleached and dyed. These fabrics were then brushed 1, 3, 5 and 7 times. The mechanical properties were measured with a KES-F system and the mechanical data were then transformed into hand values by the conversion equation, that is, KN-201-MDY. The results obtained by the analysis are as follows; 1) The variation of mechanical properties was remarkable in the initial brushing of 1∼ 3 cycles for all of grey, bleached and dyed fabrics. The values of RT, 2HB, B, G, 2HGS, MMD and SMD were decreased and MIU, WC and T were increased with the increase of number of brushing . 2) LT, B, 2HB, G, 2HG, 2HGS, MMD, SMH and W of dyed fabrics which is coincident with the end use showed lower values than those of grey or bleached fabrics, but MIU, WC and T were higher 3) From the variation of hand value, stiffness of dyed fabric showed lower value than that of grey or bleached fabric. On the other hand, smoothness, soft feeling and total hand values of dyed fabric were higher. Especially, dyed fabric showed the highest total value at the 3 cycles of brushing condition.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.652-659
• /
• 2009

Many ancient and historical artifacts were made by copper and its alloys. In the case of outdoor exposure artifacts, the surface could be suffered from corrosion and tarnish by the reaction with its environment. In order to preserve the artifacts, surface treatment would be needed and BTA coating has been usually applied to tin-bronze. This paper dealt with the evaluation of the properties of BTA coated film using a linear polarization method and AC impedance measurement. On the base of corrosion rate and film resistance for the specimen formed by coating process, optimum coating conditions are as follows; 3 cycles brushing or 3 cycles spraying coatings for natural dried process and 1 cycle brushing coating or 5 cycles spraying coating for hot-air dried process.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.39-50
• /
• 2023

Background: To promote and maintain oral health among adults, the relationship between oral health and obesity was examined, and the effects of oral health on obesity were investigated. Methods: A total of 4,270 Korean adults aged ≥20 years were selected as study subjects using raw data from the first year (2019) of the eighth period of the Korea National Health and Nutrition Examination Survey (KNHANES). Complex sample Rao-Scott chi-square test and complex sample logistic regression analysis were performed using PASW Statistics ver. 18.0. Results: The prevalence of abdominal obesity was 1.3 times higher subjects with poor oral health than in those with good perceived oral health and 1.3 times higher in subjects who did not receive dental checkups compared to those that did. The frequency of brushing of teeth was 1.2 times higher for subjects who reported brushing 2~3 times per day compared to those who reported brushing four or more times per day. The risk of being overweight was 1.3 times higher in subjects with one or more dental implants than in those with none. Conclusion: To build an integrated health program, it is thought that a preventive approach through self and expert oral health care, considering the age-specific characteristics of adults, is necessary for the intervention process used to build customized obesity prevention projects at the national level.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.356-361
• /
• 2010

This study was aimed to investigate the antibacterial efficiency of silver nano-particles and the dyeing properties of a brushed warp-knitted fabric. The properties of the brushed warp-knitted fabric containing silver nano-particle by field production processes were evaluated by analyzing its silver contents, antibacterial activity, color difference, exhaustion curve, fastness and tearing strength. Bacterial reduction ratio amounts to 91.4 and 99.9 for Staphylococcus aureus and Klebsiella pneumoniae respectively. As the brushed pile length of its fabrics is longer, the exhaution rate of disperse dye becomes higher. The brushing process of its fabrics reduces the tearing strength. The results indicate that the brushed warp knitted fabric containing silver nano-particle can be a practically promising product.

• 보건의료산업학회지
• /
• 제6권1호
• /
• pp.39-51
• /
• 2012

The purpose of this study is to provide a set of fundamental data for the oral hygiene education for the elderly as a result of the survey on the oral hygiene and subjective oral health of the elderly in an aged society. For this purpose, 269 elders who dwelled in Gyeongsangbuk-do region were randomly selected in an arbitrary selection process, followed by a survey on their oral hygiene and health. The collected data were coded and processed by using SPSS 15.0 software. As for the analysis of the data, the general characteristics and the basic items concerning the management of the oral health were analyzed for their frequency and percentages, while the general characteristics and the awareness on the oral health were processed with Chi-square validation to show a set of results as follows; Firstly, among the items on the oral health, the satisfaction on the current condition of their oral health was below average. Secondly, concerning the oral hygienic behaviors, the majority of the samples answered that they were brushing their teeth twice a day. And, as for the brushing methods, the largest number of the samples answered that they were brushing their teeth in a 'horizontal direction'. Thirdly, they reported they were having difficulties in getting dental treatments. The implications of this study are that it is necessary to provide sound oral health education to them to correct the inappropriate oral hygienic behaviors.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.595-601
• /
• 1994

This study was accomplished to investigate drape coefficient and wrinkle recovery of brushed fabrics according to treatment processes and brushing conditions. For this study, grey fabrics of blended ratio of polyester 65% : cotton 35% were bleached and dyed. These fabrics were then brushed 1, 3, 5 and 7 times. Drape coefficient and wrinkle recovery of brushed fabrics were measured by drape tester and shirley crease recovery tester respectively. The experimental results were analysed statistically to relate mechanical properties, handle, drapability, and wrinkle recovery 1) Drape coefficients of dyed fabric showed lower values and wrinkle recovery showed higher ones than those of bleached and dyed fabrics. Especially dyed fabric brushed 3 times showed good appearance and form stability. 2) Considering the blocked properties that contribute to the drape coefficient and wrinkle recovery of brushed fabrics, bending and shearing properties had a high degree of correlation with brushed fabrics, and 2HB/W showed a high positive correlation with drape coefficient and a high negative correlation with wrinkle recovery.

• 복식
• /
• 제44권
• /
• pp.131-141
• /
• 1999

The purpose of this study was to investigate the various expressions with materials in fashion illustration using CAD comparing with hand work. The design motive for this study is to be selected from Bell Epoque era which was the revolutionary period in fashion illustration. The results of this study were as follows: 1. By using CAD, water color was well expressed to repeat brushing for the clarity, darkness, and brightness. It was more effective to use CAD in layering or duplicating complex and intricate patterns because the base color gets to be concealed under the repeated oil pastel. Acryl, like oil pastel, was easily absorbed in canvas, so it is effective to repeat brushing for expressing pure color. It was inconvenient to use wax crayon for controlling the moderate opacity because wax crayon absorbed water color dye stuffs, so crayon line was concealed when repetitions were being done. 2. The advantage of using CAD was convenience for getting rid of troublesome process and inefficient works. Also, CAD had a good tool like oil pastel in the use of coloring work by using pure color. By using CAD, various expressions on materials and texture of surface can be achieved effectively. Also, it is very strong substitute for time-saving, convenience, economic aspects from providing simple instrument, and production in the state of various kinds of paper and canvas as a method of visualization. Therefore, fashion illustration using CAD provides effective way of producing works, and gives promising vision in the future.

• 한국치위생학회지
• /
• 제19권4호
• /
• pp.493-502
• /
• 2019

Objectives: This study aimed to investigate the current status of oral health applications developed for smartphones because they can be used as a new educational medium to manage and improve oral health. Methods: This study examined 60 basic oral health applications provided by Google Play Store and Apple App Store as of May 2019 and examined delivery contents, delivery methods, application types, and other information. Results: Apple included 65.4% of oral apps in the game category whereas Android included 64.3% in the education category (p>0.05). All Apple's apps and 71.4% of Android apps were developed overseas (p<0.01). The delivery contents were 61.5% for Brushing + tooth decay in Apple, and 78.6% for others (oral care products and gum diseases) in Android (p>0.05). For the delivery method, game + video was 65.4% in Apple, and game and other methods (text, image, augmented reality) was 42.9% in Android (p>0.05). In the case of application type, play type was the most common with 88.5% in Apple, and 46.4% play type and 39.3% other type (text, appreciation, problem-solving types) in Android (p<0.01). In addition, play type was high in both education (53.8%) and game (90.0%) categories (p>0.05). The average review score was 4.30 in the education category, 4.34 in the case of brushing and care (delivery contents), 4.37 in the case of using game + video (delivery methods), and 4.57 in the case of Play + other types (application type) (p>0.05). Conclusions: The use of healthcare apps is expected to increase owing to improved lifestyles, an increase in the elderly population, cost-effectiveness, and convenience that is not affected by time and place. Effective use of oral health apps will require the participation of dental professionals in the development process to identify the exact status, expand subjects, and provide appropriate information.

• 한국가구학회지
• /
• 제21권5호
• /
• pp.354-366
• /
• 2010

The modern unique woodworking furniture has been made in earnest from 50 years ago. Some oil from nut such as soybean, walnut and perilla, which is usually used in our common life, has been used as finishing material for the unique woodworking furniture. Recently, woodworking studio business among the whole furniture industry has grown gradually and many woodworkers uses various kinds of imported wood finishing oil. Many woodworkers use the imported finishing oil in the old ways instead of understanding the characters of the various kind of oil and It causes some serious problems in furniture finishing process. Therefore, this study aims at taking theoretical approach in wood finishing oil and presenting correct usage in understanding the types and characters of oil. Resultingly the new method of oil finishing for wood is suggested and this suggestion is to guide woodworkers into the right usage of wood finishing oil.

• Environmental Engineering Research
• /
• 제24권3호
• /
• pp.418-426
• /
• 2019

Current available commercial membranes are not robust and are therefore destroyed if left to dry out or handled roughly. Woven fibre microfiltration (WFMF) membranes have advantages over its competitors with respect to durability, thus, favourable for the developing economies and operation during rough conditions. Evaluation of the effects of aeration and brushing as a flux enhancement strategies for WFMF membrane was the purpose of this study. The WFMF membrane was found to be susceptible to pore plugging by colloidal material and adsorption/attachment by microbiological contaminants. This led to a 50% loss in flux. Aeration as a single flux enhancement strategy proved insufficient to maintain high flux successfully. Therefore combined flux enhancement strategies yielded the best results.