• Applied Biological Chemistry
• /
• v.41 no.5
• /
• pp.372-376
• /
• 1998

Internal mass transfer during osmotic dehydration of gingers in sugar solution was examined as a function of concentration, temperature and immersion time of those solutions using moisture loss, sugar gain, molality and rate parameter. Influence of osmotic dehydration on browning reaction and texture properties of air dried rehydrated was also evaluated. Increasing the concentration and temperature of sugar solutions increased moisture loss, sugar gain, molality and rate parameter. Water loss and sugar gain were rapid in the first 3 min and then changed gentle slope. Moisture loss during osmotic dehydration using a sugar solution $(60\;Brix,\;80^{\circ}C)$ with 18 min immersion time was 40.05 g moisture/100 g wet ginger which was 52% reduction of initial moisture content in ginger (83.02%, wet basis). The changes of rate parameter were more affected by temperature than by concentration of sugar solution. Minimum browning degree (O.D.=0.027) was carried out by osmotic dehydration in sugar solution $(40\;or\;50\;Brix,\;80^{\circ}C)$ with 15 min immersion time compared to control (O.D.=0.132). Influence of osmotic dehydration on puncture forces of 3 min rehydrated ginger in boiling water were $22{\sim}34%$ of reduction, while blanching treatment had not affected compared to those of control.

• Current Research on Agriculture and Life Sciences
• /
• v.33 no.2
• /
• pp.65-68
• /
• 2015

Hunter's color value "a" in dried-persimmon of table and full ripe fruit was higher than that in unripe fruit. In case of soluble solid content, full ripe fruit was $50^{\circ}Brix$, the highest degree, while unripe fruit was $40^{\circ}Brix$, the lowest degree. PPO activation of unripe fruit was 4.7, which was higher than table-ripe fruit (0.7) and full ripe (1.0). Polyphenol oxidase activation remained even while drying, but there was no difference in PPO activation degree as drying period increased. Total phenol content of unripe fruit was 101.4, which was higher than table-ripe fruit (57.5) and full ripe fruit (67.4). Total phenol content level increased as drying period increased, which was based on fresh weight. Hardness of unripe and table ripe fruit continued to decrease until three weeks during softening. After that, hardness was high and it started drying. However, in full ripe fruit, hardness increased after two weeks and softening was fast during the drying period, and its weight reduction rate was lower than that of unripe and table ripe fruit.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.18 no.1_2
• /
• pp.9-14
• /
• 2012

The dried persimmons are susceptible to fungal decay, browning, textural hardening during storage and marketing at ambient temperature. To resolve these problems in commercial storage, chilled storage at $0^{\circ}C$ was tried with cinnamon extract pre-treatment and different packaging conditions measuring the quality changes of dried persimmons for 160 days. Nylon/LDPE package among 6 tested package conditions was the best in maintaining the quality. The rate of weight loss, fungal decay, browning, hardening were the least in this package. Pre-treatment of cinnamon extract in quality of dried persimmons was effective in quality preservation.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• Food Science and Biotechnology
• /
• v.16 no.1
• /
• pp.123-126
• /
• 2007

The quality of Yukbo strawberry (Fragaria ananassa Duch.) fruit declines rapidly after harvest. Therefore, we examined the effects of nitric oxide (NO) on its respiration rate, quality, and shelf life. Strawberries were fumigated for 5 hr at 0, 50, 100, 200, or $500\;{\mu}L/L$ NO atmosphers, followed by a hold at $18^{\circ}C$ in air. Treatment with NO delayed the onset of ethylene production ad reduced respiration, which at $18^{\circ}C$ resulted I a maintained quality and prolonged shelf life. The NO-treated strawberries were also firmer and had a lower incidence of disease than the untreated fruit. The effect of NO on fruit quality was dose-dependent. Strawberries that were treated with low and high concentrations of 50 and $500\;{\mu}L/L$ No, respectively, had severe disease incidence and were of poor quality. Treating with NO at a concentration of $200\;{\mu}L/L$ appeared to slow down the ripening and senescence of fruit stored at $18^{\circ}C$. Calyx browning, respiration, and rot development progressed more quickly in strawberries treated with $500\;{\mu}L/L$ NO compared to those treated with $200\;{\mu}L/L$ No.

• Korean Journal of Microbiology
• /
• v.48 no.3
• /
• pp.216-219
• /
• 2012

Chungkookjang, fermented soybean, is high in microorganism, enzymes, daidzein, and peptides. Using yellow, black, Seoritae, small-black soybeans and Bacillus licheniformis B1, each Chungkookjang (YC, BC, SC, SBC) was prepared, and their fermentation patterns were compared. Changes of pH and browning material formation were taken as an indicative of fermentation. YC had a high pH increase at an early stage of fermentation, and a low change at a late stage. BC, SC, and SBC showed different patterns with a low pH increase at an early stage and a high pH increase at a late stage. Formation rate of browning material was fastest in YC and slow in the rest of BC, SC, and SMC. SC showed the highest value of browning material formation 1 d after fermentation. Anthocyanin in black soybeans seems to suppress the growth of bacteria at an early stage of fermentation. When anti-inflammatory daidzein contents were analyzed by HPLC, BC, SC, SBC showed higher values than YC. It was demonstrated that black soybeans can be fermented with B. licheniformis B1.

• Current Research on Agriculture and Life Sciences
• /
• v.16
• /
• pp.55-63
• /
• 1998

This experiment was conducted to know tolerance to cold temperature of the grape shoots collected at different locations and dormant periods in 1996 to 1997. The results from this experiment were as follows; (1) There is a little difference among locations in their electric conductance of Campbell Early cultivar, in Dec. 1996. But the least damage was shown at Kyung Joo while severe at Young Dong district in Jan. 1997. (2) Electric conductance of Sheridan cultivar was showing the same tendency as Campbell Early. (3) Early dormant period(December) affected severe bud browning at Young Dong than that of January. The grape shoot collected at Kyung San and Kyung Joo Showed a little influence on bud browning during December and January. (4) Likewise, bark browning of the grape shoot collected at Young Dong showed the same tendency with bud browning test. (5) The bud of grape shoot was bursted even at $-20^{\circ}C$. But rate of bud bursting was lower at Young Dong than the other districts at $-15^{\circ}C$ and $-20^{\circ}C$. From these results, the authors believe that we must introduce and test for suitable cultivation area and temperature before selection of permanent cultivating location.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.446-453
• /
• 2009

This study was conducted to find condition of improving the quality of peach by using surfacing washing system. The rate of weight loss of A,B groups were showed slower decreasing trend than CT group and the value of soluble solid degree was not different significantly among all groups from the results of stored peach treat with surface washing system of peach in the first experiment. The colory value of surface were increased with increasing storage period in all treatments. Browning pace of A,B groups were slower than control. Emission of carbon dioxide was increased from the results of respiration rate, 6-10 mL/kg/hr $(10^{\circ}C)$ and 32-41 mL/kg/hr $(25^{\circ}C)$. In second experiment with surface washing system of peach, the value of soluble solid was showed with similar value from 10 $Brix^{\circ}$ to 13 $Brix^{\circ}$. The pace of soft rot of EW groups were lower than CT groups from the results of hardness during storage period. The results of colory value was not showed with significant difference in $15^{\circ}C$ and $20^{\circ}C$ storage temperature but changed to browning in EW groups. The moisture contents was from 85% to 90% in all groups. And the count of total microorganism of EW groups were lower than control. Also total coliform of EW groups were negative. In sensory evaluation, washing peach was showed higher value with significant difference in all acceptability.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.247-247
• /
• 2017

Byobusan area of Aomori prefecture in Japan was a marshy sand dune and had developed for agricultural land use with a large-scale sprinkler system. Recently, it becomes an agricultural problem at this area that distinctive damage with browning maculation and fissures frequently occurs in Chinese yam tubers. Acetaldehyde is one of the factor candidates of underground part damage in plants. In this study, incidence rate of the tuber damage, and the morphological character and elemental composition of the damage parts in tubers were investigated with applications of excessive irrigation water or acetaldehyde water solution into the yam field. The incidence rate of the distinctive tuber damage increased as the input amount of irrigation water was increased. At the browning maculation parts of the tubers, many fissures and damages of cork layer were observed under scanning electron microscopy. In addition, the periderm of tubers was significantly thicker in damaged parts than in non-damaged parts. Funguses, bacterium and nematodes were not observed in the damaged part under scanning electron microscopy. The weight ratio of each constituent element in an analyzed area relative to the total weight of major essential elements was measured with energy dispersive X-ray spectrometry. The results showed that the weight ratios of boron, carbon, phosphorus, sulfur and calcium were higher in damaged parts than in non-damaged parts whereas the weight ratios of oxygen and chlorine were lower in damaged parts than in non-damaged parts. It was also shown by this spectrometry that iron, cadmium, lead and zinc were not directly involved in occurrence of the tuber damage. In this study, there was no remarkable difference of tuber appearance between non-acetaldehyde and acetaldehyde application treatments. From the above results, it is shown that the damage would be a physiological disorder induced by the input of a large quantity of water in the sandy field.

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.61-66
• /
• 2015

Purpose: The purpose of this study was to establish conditions to dry a radish by examining the drying and quality characteristics depending on the air temperature and velocity of a far infrared conveyor dryer. Methods: A sample of weighing 6 kg was dried until the moisture content reached $15{\pm}0.5%$ (w.b.). Four temperatures (50, 60, 70, and $80^{\circ}C$) and three air velocity levels (0.4, 0.6, and 0.8 m/s) were employed as the drying factors. Results: The drying rate increased with the increase in the temperature and air velocity but decreased with time. However, the drying rate was influenced by temperature rather than velocity. At a temperature $50^{\circ}C$ with a air velocity of 0.4 m/s, it took 350 min for the radish to dry which was the longest drying time; $80^{\circ}C$ with a air velocity of 0.8m/s, it took 180 min for the radish to dry, which was the shortest drying time. ${\Delta}E$ (the color difference value) increased with the increase in temperature and air velocity. The browning and rehydration ratio increased as the temperature rose. Energy consumption decreased with the increased temperature and air velocity. Conclusions: Based on the results of this study, the best drying conditions for the radish were determined to be a temperature of $70^{\circ}C$ with an air velocity of 0.8 m/s.