• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.50-57
• /
• 2004

This study attempted to evaluate the water repellency and drying effectiveness of linseed oil treated-solid wood at high temperature by immersion. The moisture content of green wood (Pinus densiflora) sample (above 90%) was reduced about 10% after 6 hours treatment at 150℃. When the treated samples were cut into cross section along the length, it was observed that the linseed oil penetrated into up to 20% of the sample cross section area in all locations. However, a strength loss of the specimen was not detected. The pre-drilling before linseed oil treatment was effective in reducing the defects such as checks and splits, and improved the linseed oil penetration into all samples from the surfaces. The result of water absorption test of treated-wood showed that the water repellent efficacy of treated-wood was greater than that of the control. The anti-fungal activity of treated samples using five sap stains and thee decay fungi was not detected in broad-spectrum toxic mechanism. However, decay test using white rot fungi (Tyromyces palustris) and brown rot fungi (Trametes versicolor) showed that the treated sample has a decay resistance to these two fungi.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.716-725
• /
• 2016

In this study, MCQ (Micronized copper Quat) which was copper-based wood preservative, was investigated on decay properties by difference of the its infiltration volume. After pressure-treatment with different MCQ concentration, test specimens (Japanese Red Pine) were exposed by a brown-rot fungus (Fomitopsis palustris). At the end of the 12 weeks exposure to the fungus, untreated specimen was showed the mass loss of more than 35%, and the value of preservative effectiveness of MCQ by indoor decay was $3.99{\pm}0.42kg/m^3$. Therefore, MCQ should be pressure-injected at least $3.99kg/m^3$. The three dimensional of the specimens were observed by using the light microscope and scanning electron microscope, Untreated and treatment specimens with low concentration generally had underwent serious decays and had a lot of fungal hyphae. Howere, the formation of bore hole by hyphae were not observed. Mass loss and decay properties of specimens were affected by amount of MCQ injection. Therefore, it is necessary to the review of the adequacy of the MCQ injection amount in domestic environments.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.3
• /
• pp.276-283
• /
• 2006

To evaluate the effectiveness of the foliar spray of calcium on "Baekdo" peach fruit, we carried out experiments in the orchards. The sprays were applied with $CaCl_2\;(Ca:\;400mg.kg^{-1})\;and\;CaCl_2$ with adjuvants (amino acid, $2g.kg^{-1}$; phytic acid, $2ml.kg^{-1}$ and wood vinegar, $2ml.kg^{-1}$) for four times from June 12 through July 4 at weekly intervals. The fruits and leaves were evaluated for Ca content, firmness and incidence of Brown rot caused by Monilinia fructicola at harvest To evaluate fruit quality included Ca content, firmness natural decay during the storage, the fruits were stored at room temperature for 14 days. The Ca content in leaf and fruit flesh at harvest was significantly increased (P=0.05) in $CaCl_2$ + amino acid treatment among $CaCl_2$ treatments. However, there was not significant Ca content in fruit peel. The firmness of flesh increased significantly (P=0.05) in $CaCl_2$ + amino acid treatment. The natural decay (Rhizopus stolonifers) during storage at the room temperature for 14 days, the fruit treated with $CaCl_2$ + wood vinegar exhibited lowest (P=0.05) incidence. Also, the firmness of the fruit during storage was firmer with treated $CaCl_2$ than untreated fruit. In the treatments of $CaCl_2$ + phytic acid and $CaCl_2$ + amino acid, it was possible to reduce incidence of Brown rot caused by M. fructicola most effectively in the field. In addition, inoculation with M. fructicola in fruits was also the most effective treatment for inhibiting disease development in vitro. These results suggested that the foliar spray of $CaCl_2$ with adjuvants increased the content of Ca and firmness of the fruits positively. It also inhibited the natural decay and the Brown rot effectively.

• Research in Plant Disease
• /
• v.24 no.4
• /
• pp.332-338
• /
• 2018

In August of 2011, a wilting disease of ginseng was observed at Bongwha, Gyeongbuk province, Korea. Affected plants initially show withering symptoms on leaves of ginseng. As the disease progresses, withering leaves spread downward, eventually encompassing the whole plant. Leaves lose vigor but remain pale green. Symptoms of roots were brown, and soft rots characterized by moist and watery decay of the whole ginseng root, which initiated as small brown, water-soaked lesions of hairy roots and enlarged to the entire roots. The causal organism isolated from the infected roots was identified as Serratia plymuthica based on its physiological and biochemical characteristics, by cellular fatty acid composition (GC-FAME), the utilization of carbon sources (BioLog System), and 16S rRNA sequence of the isolated bacterium were 99% homologous to those of Serratia plymuthica strains. Artificial inoculation of the bacterium produced the same brown or soft rot symptoms on the ginseng roots, from which the same bacterium was isolated. This is the first report of bacterial root rot caused by the Serratia plymuthica in ginseng in Korea. Serratia plymuthica has been used as antagonistic microorganism for biological control on several crop plants. But it was proved pathogen of ginseng at humid condition in this study.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.1
• /
• pp.49-57
• /
• 2023

This research aimed to evaluate the durability of Samama (Anthocephalus macrophyllus) wood treated with boron preservatives, citric acid (CA), and heating against termites. Wood samples were impregnated firstly with 5% boron solutions, such as boric acid, borax and boric acid + borax combination at 1:1 (w/w). The second impregnation used 5% CA. The impregnations were conducted in a pressure tank at 7 kg/cm² for 4 hours. After impregnation, the samples were heat treated at 80℃ or 160℃. All the treated and control samples were exposed to decay fungi, drywood termites and subterranean termites based on SNI 7207:2014 standard. The results showed that boron preservatives reduced fungal attacks on Samama wood. The combination treatment of boric acid, CA and heat treatment at 160℃ was also effective to increase the resistance of Samama wood against white- and brown rot fungi, and drywood termites. Heat treatment consistently improved the resistance of Samama wood from decay fungi.

• The Plant Pathology Journal
• /
• v.19 no.4
• /
• pp.203-204
• /
• 2003

Decayed samples of marketed mungbean sprout were collected from Sacheon, Suncheon, and Dangjin cities in Korea. Initial symptom on hypocotyls was dark-brown diamond speck, which developed into enlarged sunken brownish-black spot with irregular margin, followed by softening yellowish decay. Brown speck on cotyledon further developed into irregular lesions. This study isolated the fungus Colletotrichum sp. The fungal colony was pale orange, which turned greenish gray after 1 week at $25^{\circ}C$. Colony of reverse side in a petri dish was pink. Neither conidiomata nor setae were present in the culture. Typical fusiform conidia sized 7.5-15.0$\times$2.5-2.9 $\mu\textrm$were hyaline, aseptate, smooth, and had salmon color in mass. Conidiogenous cells were phialidic, hyaline, smooth, and cylindrical with terminal distinct collarette. Basedon these mycological characteristics, the casual organism was identified as Colletotrichum acutatum. This is first report of Colletotrichum acutatum in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.12-19
• /
• 2017

Yellow-hearted pine (YHP; Pinus densiflora for. erecta Uyeki) is one of the Red pine species and has extremely narrow growth ring and high ratio of heartwood growing in Korea. It has been used for valuable wooden constructions as palace and temple for royal family since the Joseon Dynasty period. However, scientific information on the wood properties of YHP is still very lacking. This study was carried out to investigate natural durability of YHP to fungi and termites attack. Examination of anti-fungal and anti-termite properties of YHP was performed at indoor condition using brown-rot fungi (Fomitopsis palustris), white-rot fungi (Trametes versicolor), and termite (Reticulitermes speratus). The results showed that weight loss of the heartwood in YHP after fungi and termite test was much lower than those of the sapwood in YHP. Furthermore, the highest mortality of termite was obtained from the heartwood of YHP. Consequently, it is clearly revealed that the heartwood of YHP has excellent durability against brown- and white-rot fungi and termite.

• Journal of Forest and Environmental Science
• /
• v.36 no.3
• /
• pp.225-232
• /
• 2020

Chemical modification of wood is an effective method to enhance the biological durability of wood with no toxic effect on the environment. In this study, wood of Triplochiton scleroxylon was modified using acetylation techniques. A total of one hundred wood blocks, (each 20×20×60 mm) obtained from a 22-year old T. scleroxylon tree were conditioned and acetylated at 120℃ in a bioreactor containing acetic anhydride for 60, 120, 180, 240 and 300 minutes. The percentage weight gain of acetylated wood was determined. The untreated (control) and treated blocks were exposed to Pleurotus ostreatus (white rot fungus) and Fibroporia vaillanti (brown rot fungus) after which moisture content (MC) and weight loss (WL) was monitored for 16 weeks. Data were analysed using descriptive and inferential statistics at p<0.05 level of significance. The percentage weight gain of acetylated wood samples increased with time from 10.4% (60 minutes) to 22.7% (300 minutes). MC of untreated blocks inoculated with Pleurotus ostreatus was significantly higher than those of Fibroporia vaillantii after 16 weeks exposure. There was no significant difference in the MC of the of the acetylated samples for the two fungi after 300 minutes reaction time. The WL of untreated blocks inoculated with Fibroporia vaillantii was higher than those of Pleurotus ostreatus, however, the two fungi showed no significant difference in the WL for the acetylated samples after 16 weeks exposure. Acetylation prevents moisture absorption and inhibition of fungi growth in acetylated wood compared to untreated wood, thereby enhancing the durability of Triplochiton scleroxylon.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.52-62
• /
• 2009

This research was carried out to formulate environmentally friendly wood preservatives with okara and to investigate the effects of the acid concentration used for the hydrolysis of okara and salt type on the decay resistance of the preservatives. Okara-based preservatives were formulated with okara hydrolyzates, which were prepared with 0, 1%, and 2% sulfuric acid at $25^{\circ}C$ for 1 hr, and salts such as copper chloride and/or sodium borate. The preservatives were treated into wood blocks by vacuum-pressure method, and then the treated wood blocks were leached in $70^{\circ}C$ hot water for 72 hrs. The fungal treatments of the leached wood blocks were conducted by brown-rot fungus, Tyromyces palustris, and white-rot fungus, Trametes versicolor, to examine the decay resistance of the preservatives. As the acid concentration used for hydrolysis of okara increased, the treat-ability and decay resistance of the preservatives were improved, which the leachability was decreased. Wood blocks treated with the okara/copper or okara/copper/borax, showed very good decay resistance against T. palustris and T. versicolor. However, wood blocks treated with the okara/borax and okara-free preservative solutions, were observed the fungal decay by T. palustris. The optimal conditions for the preparation of okara-based wood preservatives were formulated with okara hydrolyzed with 1% sulfuric acid, copper chloride and borax.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.51-63
• /
• 2007

The biodeterioration behaviors of wooden parts in the Janggeongpanjeon built in 15 century were investigated according to the types of wood species, positions and parts of wooden column, and environmental conditions. It was found that a high differences of deterioration in the progressing levels of wood decay, according to the types of wood species, positions and parts of wooden column, and environmental conditions. The decay levels were high in the contacted areas with stone foundation which are about up to 8~40 cm above it, although it was shown the many of wooden parts of the round columns are still good condition. In the case of decay type, it was shown the brown-rot in many of the columns at outside of building which made of hardwoods. The decay in position of the columns was most serious in the directions of east-north, west-north and north. It was also indicated that the durability of Zelkova serrata was higher than other wood species of the round columns, while it was in inferior anti-insects.