• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.17-24
• /
• 2009

This paper deals with the cancellation performance of loop back interference signal in the case of multihop relay of 16-QAM received signal at the USN radio network. For this, it is necessary to the exchange of information with long distance located station by means of the relay function between the node in the USN environment. In the relay node, the loop-back interference signal which the retransmitting signal is feedback to the receiver side due to the antenna of transmitter and receiver are co-used or very colsely located or using the nonlinear device. Due to this signal, the performance of USN system are degraded which are using the limited resource of frequency and power. For improve this, it is necessary to applying the adaptive signal processing algorithm in order to cancellating the unwanted loop-back interference signal at the frontend of receiver in relaying node, we can get the better system and multi hop performance. In the adaptive signal processing, we considered the 16-QAM signal which has a good spectral efficiency, firstly, than, the QR-Array RLS algorithm was used that has a fairly good convergence property and the solving the finite length problem in the H/W implementation. Finaly, we confirmed that the good elimination performanc was confirmed by computer simulation in the learing cuved and received signal constellation compared to the conventional RLS.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2011

In this paper, we compare and analyze data aggregation methods based on event area in wireless sensor networks. Data aggregation methods consist of two methods: the direct transmission method and the aggregation node method. The direct aggregation method has some problems that are data redundancy and increasing network traffic as all nodes transmit own data to neighbor nodes regardless of same data. On the other hand the aggregation node method which aggregate neighbor's data can prevent the data redundancy and reduce the data. This method is based on location of nodes. This means that the aggregation node can be selected the nearest node from a sink or the centered node of event area. So, we describe the benefits of data aggregation methods that make up for the weak points of direct data dissemination of sensor nodes. We measure energy consumption of the existing ways on data aggregation selection by increasing event area. To achieve this, we calculated the distance between an event node and the aggregation node and the distance between the aggregation node and a sink node. And we defined the equations for distance. Using these equations with energy model for sensor networks, we could find the energy consumption of each method.

• Journal of Broadcast Engineering
• /
• v.9 no.4 s.25
• /
• pp.305-321
• /
• 2004

With the advent of the digital broadcasting, the audiences can access a large number of TV programs and their information through the multiple channels on various media devices. The access to a large number of TV programs can support a user for many chances with which he/she can sort and select the best one of them. However, the information overload on the user inevitably requires much effort with a lot of patience for finding his/her favorite programs. Therefore, it is useful to provide the persona1ized broadcasting service which assists the user to automatically find his/her favorite programs. As the growing requirements of the TV personalization, we introduce our automatic user preference learning algorithm which 1) analyzes a user's usage history on TV program contents: 2) extracts the user's watching pattern depending on a specific time and day and shows our automatic TV program recommendation system using MPEG-7 MDS (Multimedia Description Scheme: ISO/IEC 15938-5) and 3) automatically calculates the user's preference. For our experimental results, we have used TV audiences' watching history with the ages, genders and viewing times obtained from AC Nielson Korea. From our experimental results, we observed that our proposed algorithm of the automatic user preference learning algorithm based on the Bayesian network can effectively learn the user's preferences accordingly during the course of TV watching periods.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.16-27
• /
• 2006

The wireless transmission medium inherently broadcasts a signal to all neighbor nodes in the transmission range. Existing asynchronous MAC protocols do not provide a concrete solution for reliable broadcast in link layer. This mainly comes from that an omni-directional broadcasting causes to reduce the network performance due to the explosive collisions and contentions. This paper proposes a reliable broadcast protocol in link taller based on directional antennas, named MDB(MAC protocol for Directional Broadcasting). This protocol makes use of DAST(Directional Antennas Statement Table) information and D-MACA(Directional Multiple Access and Collision Avoidance) scheme through 4-way handshake to resolve the many collision problem wit]1 omni-directional antenna. To analyze its performance, MDB protocol is compared with IEEE 802.11 DCF protocol [9] and the protocol 2 of reference [3], in terms of the success rate of broadcast and the collision rate. As a result of performance analysis through simulation, it was confirmed that the collision rate of the MDB protocol is lower than those of IEEE 802.11 and the protocol 2 of reference [3], and that the completion rate of broadcast of MDB protocol is higher than those of IEEE 802.11 and the protocol 2 of reference [3].

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.117-128
• /
• 2002

Virtual LAN (VLAN) is an architecture to enable communication between end stations as if they were on the same LAN regardless of their physical locations. VLAN defines a limited broadcast domain to reduce the bandwidth waste. The Newbridge Inc. developed a layer 3 VLAN product called VIVID, which configures a VLAN based on W subnet addresses. In a VIVID system, a single route server is deployed for address resolution, VLAN configuration, and data broadcasting to a VLAN. If the size of the network, over which the VLANS supported by the VIVID system spans, becomes larger, this single route server could become a bottleneck point of the system performance. One possible approach to cope with this problem is to deploy multiple route servers. We propose two architectures, organic and independent, to expand the original VIVID system to deploy multiple route servers. A course of simulations are done to analyze the performance of each architecture that we propose. The simulation results show that the performances of the proposed architectures depend on the lengths of VLAN broadcasting sessions and the number of broadcast data frames generated by a session. It has also been shown that there are tradeoffs between the scalability of the architecture and their efficiency in data transmissions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.77-83
• /
• 2020

The heat treatment facility is in a situation where the scope of application of the remote IOT system is expanding due to the harsh environment caused by high heat and long working hours among the root industries. In this heat treatment process environment, the IOT middleware is required to play a pivotal role in interpreting, managing and controlling data information of IoT devices (sensors, etc.). Until now, the system controlled by the heat treatment remotely was operated with the command of the operator's batch system without overall monitoring of the site situation. However, for the safety and precise control of the heat treatment facility, it is necessary to control various sensors and recognize the surrounding work environment. As a solution to this, the heat treatment safety support system presented in this paper proposes a support system that can detect the access of the work manpower to the heat treatment furnace through thermal image detection and operate safely when ordering work from a remote location. In addition, an OPEN CV-based deterioration analysis system using DNN deep learning network was constructed for faster and more accurate recognition than general fixed hot spot monitoring-based thermal image analysis. Through this, we would like to propose a system that can be used universally in the heat treatment environment and support the safety management specialized in the heat treatment industry.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.59-66
• /
• 2021

Humans mainly recognize surrounding objects using visual and auditory information among the five senses (sight, hearing, smell, touch, taste). Major research related to the latest object recognition mainly focuses on analysis using image sensor information. In this paper, after emitting various chirp audio signals into the observation space, collecting echoes through a 2-channel receiving sensor, converting them into spectral images, an object recognition experiment in 3D space was conducted using an image learning algorithm based on deep learning. Through this experiment, the experiment was conducted in a situation where there is noise and echo generated in a general indoor environment, not in the ideal condition of an anechoic room, and the object recognition through echo was able to estimate the position of the object with 83% accuracy. In addition, it was possible to obtain visual information through sound through learning of 3D sound by mapping the inference result to the observation space and the 3D sound spatial signal and outputting it as sound. This means that the use of various echo information along with image information is required for object recognition research, and it is thought that this technology can be used for augmented reality through 3D sound.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.121-127
• /
• 2022

Smart mirror is an IoT device that attaches a display and an embedded computer to the mirror and provides various information to the useer along with the mirror function. This paper went beyond the form of dealing with smart mirrors only stand alone device the provide information to users, and constructed a network in which smart mirrors are connected, and proposed and implemented a CoMirror system that allows users to talk and share information with other smart mirror users. The CoMirror system has a structure in which several CoMirror clients are connected on one CoMirror server. The CoMirror client consists of Raspberry Pi, a mirror film, a touch pad, a display device, an web camera, etc. The server has functions such as face learning and recognition, user management, a relay role for exchanging messages between clients, and setting up for video call. Users can communicate with other CoMirror users via the server, such as text, image, and audio messages, as well as 1:1 video call.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.189-196
• /
• 2023

As the manufacturing paradigm shifts, various collaborative robots are creating new markets. Demand for collaborative robots is increasing in all industries for the purpose of easy operation, productivity improvement, and replacement of manpower who do simple tasks compared to existing industrial robots. However, accidents frequently occur during work caused by collaborative robots in industrial sites, threatening the safety of workers. In order to construct an industrial site through robots in a human-centered environment, the safety of workers must be guaranteed, and there is a need to develop a collaborative robot guard system that provides reliable communication without the possibility of dispatch. It is necessary to double prevent accidents that occur within the working radius of cobots and reduce the risk of safety accidents through sensors and computer vision. We build a system based on OPC UA, an international protocol for communication with various industrial equipment, and propose a collaborative robot guard system through image analysis using ultrasonic sensors and CNN (Convolution Neural Network). The proposed system evaluates the possibility of robot control in an unsafe situation for a worker.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.119-125
• /
• 2023

IT infrastructure operation has advanced, and the methods for managing systems have become widely adopted. Recently, research has focused on improving system management using Syslog. However, utilizing log data collected through these methods presents challenges, as logs are extracted in various formats that require expert analysis. This paper proposes a system that utilizes edge computing to distribute the collection of Syslog data and preprocesses duplicate data before storing it in a central database. Additionally, the system constructs a data dictionary to classify and count data in real-time, with restrictions on transmitting registered data to the central database. This approach ensures the maintenance of predefined patterns in the data dictionary, controls duplicate data and temporal duplicates, and enables the storage of refined data in the central database, thereby securing fundamental data for big data analysis. The proposed algorithms and procedures are demonstrated through simulations and examples. Real syslog data, including extracted examples, is used to accurately extract necessary information from log data and verify the successful execution of the classification and storage processes. This system can serve as an efficient solution for collecting and managing log data in edge environments, offering potential benefits in terms of technology diffusion.