• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.227-233
• /
• 2011

This paper describes the development of a broadband quasi-Yagi antenna using a folded dipole driver. The antenna is designed on a low-permittivity substrate to reduce the surface wave effect, and hence the gain can be enhanced easily by adding directors. The folded dipole driver is connected to a 50-${\Omega}$ microstripline via a simple broadband microstrip-to-coplanar stripline transition with a quarter radial stub. The key motivation for the use of a folded dipole is to increase the input impedance at the driver, allowing a smaller mismatch loss between the antenna driver and the coplanar stripline feed. The proposed antenna has a measured bandwidth of 4.67~6.26 GHz for the -10 dB reflection coefficient, and a flat gain of 4.86~5.15 dB within the bandwidth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.185-185
• /
• 2008

This paper describes the broadband SDC (Single-ended to Differential Converter) for Digital Video Broadcasting-Satellite $2^{nd}$ edition (DVB-S2) receiver tuner IC. It is fabricated by using $0.18{\mu}m$ CMOS process. In order to obtain high linearity and low phase mismatch, the broadband SDC (Single-ended to Differential Converter) is designed with current mirror structure and cross-coupled capacitor and current source binding differential structure at VDD. The simulation result of SDC shows IIP3 of 11.9 dBm and IIP2 of 38 dBm. It consumes 5mA current with 2.7V supply voltage.

• Advances in aircraft and spacecraft science
• /
• 제1권4호
• /
• pp.379-398
• /
• 2014

This article discusses the microvibration analysis of a cantilever configured reaction wheel assembly. Disturbances induced by the reaction wheel assembly were measured using a previously designed platform. Modelling strategies for the effect of damping are presented. Sine-sweep tests are performed and a method is developed to model harmonic excitations based on the corresponding test results. The often ignored broadband noise is modelled by removing spikes identified in the raw signal including a method of identifying spikes from energy variation and band-stop filter design. The validation of the reaction wheel disturbance model with full excitations (harmonics and broadband noise) is presented and flaws due to missing broadband noise in conventional reaction wheel assembly microvibration analysis are discussed.

• ETRI Journal
• /
• 제26권1호
• /
• pp.13-20
• /
• 2004

We propose a new optical code division multiple access (OCDMA) scheme for reducing multiple access interference (MAI) and enhancing performance for optical subscriber access networks using modified pseudorandom noise (PN)-coded fiber Bragg gratings with bipolar OCDMA decoders. Through the bipolar OCDMA decoder and the modified PN codes, MAI among users is effectively depressed. As the data are encoded either by a unipolar signature sequence of the modified PN code or its complement according to whether the data bit is 1 or 0, the bit error ratio (BER) can be more improved with the same signal to interference plus noise ratio over the conventional on-off shift keying-based OCDMA system. We prove by numerical analysis that the BER of the proposed bipolar OCDMA system is better than the conventional unipolar OCDMA system. We also analyze the spectral power distortion effects of the broadband light source.

• International journal of advanced smart convergence
• /
• 제4권2호
• /
• pp.14-19
• /
• 2015

Recently, water sewage disposal facilities are able to manage real-time data collection and record management through compact broadband modem LAN switching technology. Therefore, it needs more stable and efficient facility management. So, we required practical use of environmental facilities convergence based on broadband integrated modem. In this paper, we proposed short distance wireless communication network of compact broadband modem for sewage disposal facilities. And it received data inside of water treatment facility using the two communication methods (IEEE802.11x and IEEE802.15.4x). Then, our proposed an data-flow control algorithm of wireless network technology will prioritize processing data when emergency happen through collecting data, analysis data and processing. Lastly, we proved usefulness by experiment and simulation analysis.

• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.770-775
• /
• 2004

Although $High-T_c $superconducting HTS antennas have high efficiency and high gain, narrow bandwidth due to the high Q is the major limitation for application of satellite communication and mobile communication. Defining bandwidth as the frequency range over which standing wave ratio (SWR) is 2:1 or less, HTS antenna bandwidths are typically less than 1 %. Thus considerable effort has been focused on developing HTS antennas for broadband operation. In this work the HTS antenna array, using the bipin antenna which consisted of two triangle-radiation patches, was designed and fabricated using a ${YBa}_2{Cu}_3{O}_7x (YBCO)$ superconducting thin film on a MgO substrate for broadband operation. Also gold antennas with the same dimension as our HTS antennas were fabricated on the MgO substrate for the comparison. Experimental results for both antennas were reported in terms of radiation patterns, return losses, bandwidths and other various characteristics. The center frequency of HTS antennas was 20.28 GHz and the bandwidth obtained was significant 10 %.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1145-1150
• /
• 2008

In this paper, We studied efficient design of wireless transmission system for unified data transmission in a subway and railway. It is increased that need of broadband multimedia service to make useful environment for user and to support the operation of railway system. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. So it need more wireless Station. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of broadband wireless system at a subway. Subway broadband wireless transmission system is tested in this year, and it is to be extended to province subway. Cost of subway broadband wireless transmission system is saved, because the system can be efficiently designed. Therefore, the effectiveness is expected to be very big.

• 한국재료학회지
• /
• 제32권8호
• /
• pp.333-338
• /
• 2022

In this work, we developed silver nanowires and a silicon based Schottky junction and demonstrated ultrafast broadband photosensing behavior. The current device had a response speed that was ultrafast, with a rising time of 36 ㎲ and a falling time of 382 ㎲, and it had a high level of repeatability across a broad spectrum of wavelengths (λ = 365 to 940 nm). Furthermore, it exhibited excellent responsivity of 60 mA/W and a significant detectivity of 3.5 × 10¹² Jones at a λ = 940 nm with an intensity of 0.2 mW cm^-2 under zero bias operating voltage, which reflects a boost of 50 %, by using the AC PV effect. This excellent broadband performance was caused by the photon-induced alternative photocurrent effect, which changed the way the optoelectronics work. This innovative approach will open a second door to the potential design of a broadband ultrafast device for use in cutting-edge optoelectronics.

• 한국통신학회논문지
• /
• 제31권11B호
• /
• pp.997-1004
• /
• 2006

인터넷을 기반으로 하는 IT 눈부신 발전과 더불어 언제, 어디서나, 시간과 장소에 구애받지 않고 인터넷을 사용할 수 있도록 하는 사회적 요구가 구체화 되고 있다. 이러한 요구에 부응하고자 국내에서는 시속 200km이상의 빠른 속도로 이동 중에 있더라도 초고속인터넷이나 방송 서비스를 제공할 수 있는 위성광대역 인터넷 시스템기술을 개발하고 있다. 본 연구에서는 위와 같이 개발된 시스템을 국내 고속철도(KTX)에 적용하여 서비스를 제공할 때, 관련 시설투자에 대한 경제적 타당성을 검토하고i라 한다. 경제성 분석을 위해 현재 유럽에서 이미 제공되고 있는 고속철도 인터넷서비스를 조사하였고, 국내 고속철의 특성을 감안하여 필요시설과 장비를 구성하여 항목별 비용분석을 수행하였다. 해외 사례와 비행기 등의 다른 운송수단에서 예상하고 있는 수요 및 요금 수준에 근거하여 고속철도 인터넷서비스 매출을 시나리오별로 전망하였으며, 각 시나리오에서 계산된 비용과 매출로부터 순현재가와 수익률을 산정 하였다. 본 연구의 결과는 관련 기술 개발에 대한 경제적 타당성 여부를 판단하는데 활용될 수 있으며, 비용효과적인 서비스 설계 및 구현에 도움을 줄 수 있을 것으로 기대된다.

• 한국음향학회지
• /
• 제39권3호
• /
• pp.216-225
• /
• 2020

본 논문은 음선 경로법에 기반한 광대역 수중음향 전달 채널을 모델링하는 방법을 다루었다. 수중음향 전달 채널은 종종 주파수 영역에서 시간 조화 함수로 취급되어, 광대역 시계열 신호 모의 시 활용이 어렵다. 따라서 수중 음파 전달 환경을 반영한 광대역 시간영역 모델링 기법이 요구되며, 본 논문에서는 이를 위해 시간영역에서 다중 경로의 도달 시간지연이 계산 가능한 고유 음선 분석 기법을 활용하였다. 또한 연속 시간의 파동방정식으로부터 산출된 고유 음선의 분석 결과를 컴퓨터 모의가 가능한 이산시간 시스템에 적용하기 위해, 음선의 위상, 주파수별 손실 및 도달 시간지연을 유한 임펄스 응답으로 근사하여, 광대역 수중음향 전달 채널을 모의하는 방법을 제안하였다.