• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.668-672
• /
• 2009

Cookies containing wheat flour mixed with 10, 30 or 50% esterified with octenylsuccinic anhydride (OSA, 3%) and dry-heated ($130^{\circ}C$, 2 hr) high amylose rice (Goami 2) starch (DH-OSAR) were prepared and then their physical and digestive properties were evaluated. When the amount of added DH-OSAR increased, the hardness and brittleness of the cookies decreased, and L (brightness) value increased. For the digestive properties, the cookies containing 50% DH-OSAR significantly increased the amount of slowly digestible starch (SDS), and decreased the amount of rapidly digestible starch (RDS), resulting in the lowest expected Glycemic Index (eGI) among tested cookies. Although the cookies containing DHOSAR were inferior to the control, the addition of xanthan gum (0.5% based on total powder amount) significantly improved their textural and sensory properties. Specially, the cookies containing 50% DH-OSAR and the addition of 0.5% xanthan gum showed the lowest eGI value, maintaining the improved textural and sensory properties.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.13-19
• /
• 2014

Three heat-treatment schedules were applied to $90{\times}90mm$ dimension square lumber of Pinus koraiensis, one of major domestic species, and their colors and physical properties were investigated for obtaining an optimum schedule. Each square lumber was heat-treated three times. The temperatures of $170^{\circ}C$ and $190^{\circ}C$, and the time of 9 hours and 13 hours were used for the first heat-treatment. The schedule of $190^{\circ}C$ and 7 hours were used for the next two heat-treatments. The averages of brightness $L^*$ decreased linearly as the heat-treatment repeated and its standard deviations also decreased slightly. While the averages of color difference ${\Delta}E^*$ increased linearly as the heat-treatment repeated and its standard deviations also increased slightly. The average compressive strength of the heat-treated specimen was higher than that of the control by 9%, which deviates from previous reports. ASE and WPG of the heat-treated specimens were measured to confirm that heat-treatment improved dimensional stability significantly.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.242-246
• /
• 2017

In this study, it was investigated about optical simulation in high brightness and high uniformity general lighting using glass light guide plate. And we adopt edge-light emission type light plate. Edge-light type lighting has been used LCD application, especially note PC or smart phone backlight unit. Because it had the good properties such as slim shape and light weight. We thought this type was suitable for general lighting application such as wall attached type or ceiling mount type. But many of edge-light type lighting had problems. It called slanted output light rays. That was main key parameter how could control the direction of output light rays. We investigated the solution of this problems, using ray tracing method, we recognized the major fact of the solution relied on the geometric structure of diffusing dot shape. We set the conditions of aspect ratio in diffusing dot shape such as 0.5 to 1. And, at first, we designed diffusing dots shape based on the results of optical simulation and made specimen. as above condition, and acquired good result in confirming dots shape such as the value of the output rays's peak angle was around 75 degrees. And good light distribution characteristics were measured by slated spectro-radiometer. It was shown that the effective ways of designing light distribution characteristics using optical simulation such as ray tracing linear method for making general lighting using glass light guide plate.

• Journal of Fashion Business
• /
• v.17 no.3
• /
• pp.48-57
• /
• 2013

This study was performed to quantitatively and qualitatively estimate the effect of keratin essence on hair protection against physicochemical damage. Damaged hairs were obtained from an early thirty woman who dyed her hair two times and did digital permanent treatment of her hair two times. The damaged hairs were divided into four experimental groups, which are the control hair (CH) group without additional beauty treatment, the damaged hair (DH) group by additional dyeing treatment, basic essence-treated hair (BEH) group, and keratin essence-treated hair (KEH) groups according to the research goal. The protection effect of keratin essence against the physicochemical damage was quantitatively compared by difference of chrominance measured using a color difference meter and qualitatively compared by difference of outer morphological structure images pictured using scanning electron microscopy (SEM). The brightness and yellowish blue color of KEH were relatively lower but the reddish blue color was relatively higher than other groups of test hairs. Cuticle structure of the previously DH was irregularly deformed and more strongly deformed or partially broken by additional dyeing treatment. On the other hand, the gaps between cuticle scales of the DH were reformed by treatment with basic essence and reformed and filled by treatment with keratin essence in comparison with the DH group. Conclusively, the keratin essence was effective to protect hair structure against the structural damage induced by the dyeing-treatment, by which the coloring efficiency is thought to be improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3146-3151
• /
• 2012

For using them as a optical source of inspections equipment for LCD panel, the design ofexcellent backlight system, brightness uniformity and high power and good protection against heat is essential.In this paper, backlight system which is built in the 45 inch side emitting LCD backlight by LED arraystructure and driving circuit were designed and developed. After that, their performances were measured. Itshowed the luminance from 3,000 to 25,000[$cd/m^2$], the mean value x:0.3144, y:0.3076 of x-y chromaticity,dimming range of 27~515[$cd/m^2$], free flicker noise in the 80kHz and black level of 0.7~0.1[$cd/m^2$], thermaltest of cooling system in 20,000[$cd/m^2$] over values.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.206-208
• /
• 2017

In recent years, we have been working on the improvement project of mercury 3-lecture type at the Geummundo lighthouse for more than 100 years. We have installed toxic mercury removal, LED light source, and dualization system for nonstop. It can be seen as an example. Circular restoration of the entire frame is performed, and the real-time status can be grasped through the installation of the double-ball bearing and the remote control system. After installation, optical measurement through Hanvit secured the optical performance of 2,000,000 cd of floating brightness of 300cd, proving the efficient possibility of introducing the domestic rotary type light source using LED light source.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2396-2400
• /
• 2007

Transparent In-doped (1 at.%) zinc oxide (IZO) thin films are deposited by pulsed DC magnetron sputtering with H2 mixed Ar atmosphere on glass substrate without any heating process. Even at room temperature, highly c-axis oriented IZO thin films were grown in perpendicular to the substrate. The hydrogenated IZO (IZO:H) film isolated in H2 atmosphere for 30 min exhibited an average optical transmittance higher than 85% and low electrical resistivity of less than 2.7 × 10?3 Ω·cm. These values are comparable with those of commercially available ITO. Each of the IZO films was used as an anode contact to fabricate organic light-emitting diodes (OLEDs) and the device performances studied. At the current density of 1 × 103 A/m2, the OLEDs with IZO:H (H2) anode show excellent efficiency (11 V drive voltage) and a good brightness (8000 cd/m2) of the light emitted from the devices, which are as good as the control device built on a commercial ITO anode.

• Convergence Security Journal
• /
• v.14 no.7
• /
• pp.29-36
• /
• 2014

In this study, we design and develop a VLC test-bed system which has been recently issued and focused as good convergence technology in the world. We classify the developed system into transmission part including analog LED driver module, digital signal modulation module, and receiver part with light sensing module and signal demodulation module. Then we introduce important characteristics and components. We analyze some factors for each module. To validate the communication of the designed VLC system, we develop a VLC sender-receiver simulator which can control the dimming factor and flicker-free effect. From the developed system, we observed about 12Mbps of data transmission rate with 0.5m~1m of distance, without packet loss. We verified the real-time communication with multimedia streaming which can be considered as very high date rate. The developed system and technology will be useful for some converged data services like indoor positing, home appliances, and indoor parking system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.8
• /
• pp.760-765
• /
• 2008

Low power laser therapy is internationally certified and is known to be effective in stimulating DNA in living organisms, increasing protein synthesis and activating cell division, smoothing blood circulation, promoting cell activation, cell regeneration and function. It also has anti-inflammatory, anti-edemic, anti-fibrous dysplastic and neuralogic hyperfunctional effects. This study was intended to verify the effect of LED irradiation therapy on wound healing in cell and animal tests by applying LED irradiator using a laser and laser diode, which was independently designed and developed to emit beams of similar wavelength to that of a laser. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity and reservation. In case of cell proliferation experiment, each experiment was performed to irradiation group and non-irradiation group for tissue cells. MTT assay method was chosen to verify the cell increase of two groups and the effect of irradiation on cell proliferation was examined by measuring 590 nm transmittance of micro-plate reader. In the wound healing experiment, 1$cm^2$ wounds on the skin wound of SD-Rat(Sprague-Dawley Rat) were made. Light irradiation group and none light irradiation group divided, each group was irradiated one hour a day for 9 days. As a result, the cell increase of tissue cells was verified in irradiation group as compared to non-irradiation group. And, compared with none light irradiation group, the lower incidence of inflammation and faster recovery was shown in light irradiation group.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.66-77
• /
• 2016

This study aimed to develop eel dipping sauce adding bokbunja(Rub coreanus Miquel) vinegar and investigated the physicochemical and quality properties of eel dipping sauce for optimization. To accomplish the objective, eel dipping sauce was created by adding bokbunja vinegar. The findings are as follows. Among the composition, moisture and crude fiber content increased as more bokbunja vinegar was added. As for crude protein and crude ash, however, their content decreased as more bokbunja vinegar was added. In terms of crude fat, there was no difference between the control group and addition group. As for pH, the content decreased as more bokbunja vinegar was added. Also. the following properties declined as more bokbunja vinegar was added: titratable acidity; sugar content; salinity; viscosity. In terms of chromaticity, however, the brightness(L), redness(a), and yellowness(b) all increased. The overall acceptability was as follows: 0% < 5% < 10% < 20% < 15% Therefore, the proper content of bokbunja vinegar to add in eel dipping sauce is approximately 15~20%.