• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2021

Concrete structures gradually age due to deterioration of materials or excess loads and environmental factors, and their performance decreases, affecting the usability and safety of structures. Although external tension construction methods are widely used among the reinforcement methods of old bridges, it is insufficient to identify the effects and effects of reinforcement depending on the level of aging. Therefore, in this study, a four-point loading experiment was conducted on the subject with the non-reinforced and external tensioning method to confirm the reinforcement effect of the external tensioning method, assuming the aging of the structure as a reduction in the compressive strength and tensile reinforcement of concrete, to analyze the behavior of the reinforcement and confirm the reinforcement effect. As a result of the experiment, it was difficult to identify the amount of reinforcement in the extreme condition due to early elimination of the anchorage. Therefore, compliance with the regulations on anchor bolts is required when applying the external tension reinforcement method. Crack load and yield load increased depending on whether external tension was reinforced, but before the crack, the stiffness before and after reinforcement was similar, making it difficult to confirm the reinforcement effect.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.569-576
• /
• 2011

Recently the establishment of high accuracy 3D spatial information has been largely stimulated according to the increase in need of such 3D spatial information. In the fields of constructions and civil works, studies on increasing the productivity in these fields through converging them with other fields using the established 3D spatial information have been conducted. In such a tendency, BIM (Building Information Modeling) technologies have been rapidly applied to the fields of constructions and civil works. In particular, in the fields of constructions and civil works that represent a life span of plan-design-construction-maintenance, some BIM application methods and plans for the characteristics in each step have been proposed. Thus, the objective of this study is to simulate a project that is reasonable and can be optimized in connection with 3D spatial information and BIM technologies escaped from the conventional civil construction process that is based on empirical, statistical DB, and 2D information. For achieving this objective, 3D terrain data for the subject area engaged in this study using aerial photographs and airborne LiDAR was established. Also, a counter plan for the issues, which cannot be solved in the conventional methods for managing civil work projects, is applied through implementing bridge-based civil structure BIM by combining them with objective information.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.419-428
• /
• 2020

The flow past a wall mounted square cylinder, a typical and basic shape of building, bridge or offshore structure, was simulated using URANS computation through adoption of three turbulence models, namely, the k-ε model, k-ω model, and the v²-f model. It is well known that this flow is naturally unstable due to the Karman vortex shedding and exhibits a complex flow structure in the wake region. The mean flow field including velocity profiles and the dominant frequency of flow oscillation that was from the simulations discussed earlier were compared with the experimental data observed by Wang et al. (2004; 2006). Based on these comparisons it was found that the v²-f model is most accurate for the URANS simulation; moreover, the k-ω model is also acceptable. However, the k-ε model was found to be unsuitable in this case. Therefore, v²-f model is proved to be an excellent choice for the analysis of flow with massive separation. Therefore, it is expected to be used in future by studies aiming to control the flow separation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.8-16
• /
• 2016

This study presents the visualization of shape information based on Octree using 3D laser scanning. The process of visualization was established to construct the Octree structure from the 3D scan data. The scan data was converted to a 2D surface through the mesh technique and the surface was then converted to a 3D object through the Raster/Vector transformation. The 3D object was transmitted to the Octree Root Node and The shape information was constructed by the recursive partitioning of the Octree Root Node. The test-bed was selected as the steel bridge structure in Sungkyunkwan University. The shape information based on Octree was condensed into 89.3%. In addition, the Octree compressibility was confirmed to compare the shape information of the office building, a computer science campus in Germany and a New College in USA. The basis is created by the visualization of shape information for double-deck tunnel and it will be expected to improve the efficiency of structural health monitoring and maintenance.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.197-208
• /
• 2003

This paper is to determine the possibility of re-using waste concrete from Incheon city area. The strength test was conducted with five aggregate compounds which was replaced a natural aggregate with recycled aggregate. After checking the physical characteristics of recycled aggregate compounds, the mix design of recycled concrete was conducted. For the relatively comparison between natural and recycled compounds, while the unit aggregate weight was changed, other conditions were fixed. The freezing and thawing test which included fly-ash and super-plastezer were performed to check the durability and workability when recycling waste concrete. In the physical characteristics of recycled aggregate, it was found that the specific gravity of recycled coarse aggregate and recycled fine aggregate satisfied the first grade of recycle specification(KS), and all compounds of recycled aggregate also satisfied the second grade of absorption specification, Especially up to the 50% substitution of recycled aggregate is equal to or a bit lower than that of convention aggregate. In comparison with conventional concrete, the recycled concrete is lower than maximum by 7% in compressive strength decreasing rate after freezing-thawing test. From now, although most of recycled concrete was used to the building lot, subgrade, asphalt admixture, through the result. It was proved that possibility of re-using recycled aggregate as the substructure of bridge, retaining wall, tunnel lining and concrete structure which is not attacked the drying shrinkage severely.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.131-138
• /
• 2014

The steel structure fabrication plant certification program was enacted as a part of the construction technology management act, article 24-3, to improve the quality of steel construction after the decay falling accident of Seongsu Bridge in 1994. However, the national certification program for structural precast concrete that is a prefabricated construction products produced by casting concrete in plant is not implemented yet. So, to introduce the proper certification system for precast concrete, the quality certification programs of North America, Europe and Japan are surveyed. In North America, the organizations that manage the plant certification programs are PCI, NPCA, CPCI and so on. Sales of precast concrete elements in Europe are governed by the construction products regulation 305/2011. Therefore, CE marking is mandatory from July 2013 for all construction products including precast concrete. In Japan, precast concrete products used in civil engineering are certificated by JIS mark, product certification system and plants for manufacturing precast concrete building elements are audited by Japan Prefabricated Construction Suppliers and Manufacturers Association. Based on these survey studies, in this paper is described an adaptation of precast concrete plant certification to comport with the certification system in Korea.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.2
• /
• pp.27-41
• /
• 2014

This study aims to investigate the history, cultural values prototype through literature analysis, characteristics of construction, location, space structure and landscape characteristics by Arc-GIS on the Munam pavilion(聞巖亭) in Changnyeong. The results were as follows. First, Shin-cho((辛礎, 1549~1618) is the builder of the Munam pavilion and builder's view of nature is to go back to nature. The period of formation of Munam pavilion is between 1608-1618 as referred from document of retire from politics and build a pavilion. Secondly, Munam pavilion is surrounded by mountains and located at the top of steep slope. Pavilion was known as scenic site of the area. But damaged in a past landscape is caused by near the bridge, agricultural facilities, town, the Kye-sung stream of masonry and beams. Thirdly, Munam pavilion is divided into the main space, which is located on the pavilion, space in located on the pavilion east and west and the orient space, which is located on the Youngjeonggak. Of these, original form of Munam pavilion is a simple structure composed of pavilion and Munam rock, thus at the time of the composition seems to be a direct entry is possible, unlike the current entrance. Fourth, Spatial composition of Munam pavilion is divided into vegetation such as Lagerstroemia indica trees in Sa-ri in Changnyeong, ornament such as letters carved on the rocks and pavilion containing structure. The vegetation around the building is classified as precincts and outside of the premises. Planting of precincts was limited. Outside of area consists of front on the pavilion, which is covered with Lagerstroemia Indica forest and Pinus densiflora forest at the back of the pavilion. Ofthese,LargeLagerstroemiaIndicaforestcorrespondstothenaturalheritageasHistoricalrecordsofrarespeciesresourcesthatareassociated withbuilder. Letterscarvedontherocksrepresenttheboundaryof space, which is close to the location of the Munam pavilion and those associated with the builder as ornaments. Letters carved on the rocks front on the pavilion are rare cases that are made sequentially with a constant direction and rules as act of record for families to honor the achievements. Fifth, 'The eight famous spots of Munam' is divided into landscape elements that have nothing to do with bearing 4 places and landscape elements that have to do with bearing 4 places. Unrelated bearings of landscape elements are Lagerstroemia indica trees in Sa-ri in Changnyeong, Pinus densiflora forest at the back of the pavilion, Okcheon valley, Gwanryongsa temple and Daeheungsa temple. Bearing that related element of absolute orientation, which is corresponding to the elements are Daeheungsa temple, Hwawangsan mountain, Kye-sung stream and Yeongchwisan mountain. Relative bearing is Gwanryongsa temple, Yeongchwisan mountain and Kye-sung stream Gongjigi hill. At Lagerstroemia indica trees in Sa-ri in Changnyeong, Pinus densiflora forest at the back of the pavilion, Kye-sung stream and Okcheon valley, elements are exsting. Currently, it is difficult to confirm the rest of the landscape elements. Because, it is a generic element that reliable estimate of the target and locations are impossible for element. Munam pavilion is made for turn to nature by Shin-cho(辛礎). That was remained a record such as Munamzip(聞巖集) and Munamchungueirok(聞巖忠義錄) that is relating to construction of pavilion. Munam pavilion located in a unique form, archival culture through the letters carved on the rocks and Large Lagerstroemia indica forest and through eight famous spots, cultural landscape elements can be assumed that those elements are remained.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.12-31
• /
• 2016

Gangwon Provincial Office, which is Historical Landmark No. 439, existed from 1395 to 1895. It played a significant role of provincial administration. Gangwon Provincial Office was rebuilt in the $17^{th}$ Century when governors' additional job system began. It had 50 buildings and 670 sections. During the Japanese colonial era and the Korean War, most of the buildings were demolished, and in 2005 partially restored. Currently, after the old Wonju City Post Office was demolished, the back garden facilities of the Provincial Office are being restored. The back garden of Gangwon Provincial Office was completely destroyed when the Japanese army base at Wonju made it a playing field during the Japanese colonial era. After demolishing the old post office in the back garden, excavation and investigation were made. A pond and building relics were found, but they were too damaged to be restored. However, this thesis found that there were Bongraekak, Yeongjusa(Kwanpungkak), Cheyako, Joojeong Rainbow Bridge after studying literature and paintings. There were also Hwansunjeong and Bangjangdae outside the pond. The names of the back garden and how they were made are related to hsien. In the pond, they made 3 islands signifying Mt. Samshin(immortal world) in the legend and built pavilions on that. The pavilions of the back garden were named Bongrae, Yeongju, and Bangjang, and the titles of other pavilions also had the names of hsien. The back garden of Gangwon Provincial Office was made like an immortal world, befitting its role of governing Mt. Bongrae(Mt. Geumgang.) The governors of Gangwon Province often went to the back garden and enjoyed becoming a hsien. They regarded themselves as the owners of Bongrae, i.e., the immortal world. Gangwon Provincial Office has a unique historical significance because it implemented an immortal world, making use of the characteristic of Gangwon Province.