• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.63-65
• /
• 2023

BIM and AR technologies have been assessed as a means of enhancing productivity within the construction industry, through the provision of effortless access to critical data on site, achieved via the projection of 3D models and associated information onto actual structures. However, most of the previous researches for applying AR technology in construction quality management has been performed for construction projects in general, resulting in only overall on-site management solutions. Also, a few previous researches for the application of AR in the quality management of specific elements like reinforcements focused only on simple projection, so conducting specific quality inspection was impossible. Hence, this study aimed to develop a practically applicable BIM-based AR quality management system targeted for reinforcements. For the development of this system, the reinforcement inspection items on the quality checklist used at railway construction sites were analyzed, and four types of AR functions that can effectively address these items were developed and installed. The validation result of the system for the actual railway bridge showed a degradation of projection stability. This problem was solved through model simplification and enhancement of the AR device's hardware performance, and then the normal operation of the system was validated. Subsequently, the final developed reinforcement quality inspection system was evaluated for practical applicability by on-site quality experts, and the efficiency of inspection would significantly increase when using the AR system compared to the current inspection method for reinforcements.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.233-248
• /
• 2023

The increasing integration of intelligent information technologies within organizational systems has amplified the risk to personal information security. This escalation, in turn, has fueled growing apprehension about an organization's capabilities in safeguarding user data. While Internet users adopt a multifaceted approach in assessing a company's information security, existing research on the multiple dimensions of information security is decidedly sparse. Moreover, there is a conspicuous gap in investigations exploring whether users' evaluations of organizational information security differ across industry types. With an aim to bridge these gaps, our study strives to identify which information security attributes users perceive as most critical and to delve deeper into potential variations in these attributes across different industry sectors. To this end, we conducted a structured survey involving 498 users and utilized the analytic hierarchy process (AHP) to determine the relative significance of various information security attributes. Our results indicate that users place the greatest importance on the technological dimension of information security, followed closely by transparency. In the technological arena, banks and domestic portal providers earned high ratings, while for transparency, banks and governmental agencies stood out. Contrarily, social media providers received the lowest evaluations in both domains. By introducing a multidimensional model of information security attributes and highlighting the relative importance of each in the realm of information security research, this study provides a significant theoretical contribution. Moreover, the practical implications are noteworthy: our findings serve as a foundational resource for Internet service companies to discern the security attributes that demand their attention, thereby facilitating an enhancement of their information security measures.

• Journal of Korea Water Resources Association
• /
• v.56 no.12
• /
• pp.837-844
• /
• 2023

Small and medium-sized mountain rivers that flow through steep, confined valleys carry large amounts of coarse-grained sediment and woody debris during floods. It causes an increase in flood water level by aggrading the riverbed and the cross-section blockage due to driftwood accumulation during flooding. However, the existing flood level calculation in the river basic plan does not consider these changes. In this study, using the Typhoon Hinnamnor flood in September 2022 as an example, we performed numerical simulations using the HEC-RAS model, taking into account the blockage of a cross-section at the bridge and changes in riverbed elevation that occurred during floods, and analyzed the flood level to predict flood risk. This study's results show that flooding occurs if more than 30% of the cross-section is blocked. The rise of flood water levels corresponds to that of the riverbed due to sediment deposition. These results can be used as basic data to prevent and effectively manage flood damage and contribute to establishing flood defense measures that consider actual phenomena.

• The Journal of Korean Academy of Sensory Integration
• /
• v.6 no.1
• /
• pp.47-62
• /
• 2008

Introduction : Sensory Integration(SI) theory, science it is developed by an occupational therapist A. Jean Ayres, is the one of the most popular frames of reference used in occupational therapy(OT) intervention. It has been proved as a scientific theory especially in neuroscience discipline through abundant research and practice. Occupational therapists apply the SI therapy with strong clinical reasoning to improve adaptive behaviors of their clients and try to link the adaptive behaviors with occupational performance in the clients' everyday life. One of the manners regarding clinical reasoning is Top-down approach. In occupational therapy discipline, Top-down approach is well-reflected within two evaluation tools; Canadian Occupational Performance Measure(COPM) and Assessment of Motor and Process Skills(AMPS) and two models of practice; Canadian Model of Occupational Performance(CMOP) and Occupational therapy intervention process model(OTIPM). Objective : The purpose of this paper demonstrates how SI therapy can be employed within OTIPM and how the OT process (evaluation-intervention-outcome) can be structuralized based on the Top-down approach. This single-case study recognizes the impact of a SI therapy for a male adolescent on his occupational performance. Intervention Examined : "P" was 16 years old male adolescent with no diagnosis and junior of the high school when he was referred. P was always with mouth opened, showed difficulties in gathering things need to be prepared and managing and paying money for shopping, and his colleges dislike getting close to him because he can't was his body well. AMPS was administrated in initial evaluation and reevaluation of P's occupation performance, Bruininks-Oserestky Test of Motor Proficiency-2(BOT-2) was carried out to assess motor functions and perception skills related in sensory integration, and occupational therapist performed clinical observation in order to complement the evaluation quantitatively and quantitatively. Based on the evaluation, it is concluded that the SI therapy is primary means to improve P's occupational performance, and three therapeutic approaches were constructed; restorative, acquired and compensatory approach. P showed improved motor and process skills in occupational performance after undergone the occupational therapy. Conclusions : The sensory integration therapy was practical enough to build the bridge between the occupational performance(Top) and the underlying component problems (Bottom). The OTIPM was helpful to identify meaningful occupation for P and P's family within P's contexts, and the AMPS was valuable to analyze and clarify the cause of difficulties in the chosen occupational performance.

• Asia pacific journal of information systems
• /
• v.23 no.3
• /
• pp.1-23
• /
• 2013

Open Source Software Development (OSSD) differentiates itself from traditional closed software development in that it reveals its source codes online and allows anyone to participate in projects. Even though its success was in doubt, many of the open collaborative working models produced successful results. Academia started to get interested in how developers are willing to participate even when there are no extrinsic rewards for their efforts. Many studies tried to explain developers' motivations, and the pursuit of ideology, reputation, and altruism are found to be the answers. Those studies, however, focused mostly on how the first contribution is made out of a certain motivation. Nowadays, OSSD reaches at its maturity and 70% of professional developers have used or utilized open source software or code in their works. As the proportion of people experiencing OSS, the accounts from previous studies are expected to be weakened. Also, extant literature fails to explain how the motivation of participating in OSS evolves over time and experiences. Given that changing over time or over experiences is the natural in the perception of motivation, studies in an attempt to understand how the motivation changes or evolves are in need. In this study, we aimed to explain how the perception about OSS from past usage or related experiences leads to the intention to sustain OSS participations. By doing so, we try to bridge the gap between previous studies and the actual phenomenon. We argued that perceived instrumentality about OSS learned from past experiences will first affect the formation of organizational identity towards general OSS community. And once the organizational identity is formed, it will affect the one's following behaviors related to OSS development, most likely to sustain the favoring stance toward OSS community. Our research distinguishes itself from previous one in that it divides the paths from organizational identity formed to the intention to sustain the voluntary helping behaviors, by altruistic and conforming intentions. Drawing on this structural model, we could explain how organizational identity engages in forming the sustaining intention from past experiences, and that the intention to help at individual level and organizational level works at different level in OSS community. We grounded our arguments on Social identity theory and Organizational Citizenship theory. We examined our assumption by constructing a structural equation model (SEM) and had 88 developers to answer our online surveys. The result is analyzed by PLS (partial least square) method. Consequently, all paths but one in our model are supported, the one which assumed the association between perceived instrumentality and altruistic intention. Our results provide directions in designing online collaborative platforms where open access collaboration is meant to occur. Theoretically, our study suggests that organizational citizenship behavior can occur from organizational identity, even in bottom-up organizational settings. More specifically, we also argue to consider both organizational level and individual level of motivation in inducing sustained participations within the platforms. Our result can be interpreted to indicate the importance of forming organizational identity in sustaining the participatory behaviors. It is because there was no direct association between perceived instrumentality from past experiences and altruistic behavior, but the perception of organizational identity bridges the two constructs. This means that people with no organizational identity can sustain their participations through conforming intention from only the perception of instrumentality, but it needs little more than that for the people to feel the intention to directly help someone in the community-first to form the self-identity as a member of the given community.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.17-27
• /
• 1981

This study was conducted to determine the chemical composition and the mechanical properties of four commercially available low gold-based crown and bridge alloy produced in Korea. Four dental casting gold-silver-palladium alloys, i.e., A, B, C and D (code of alloys) were selected for the evaluation of chemical composition, ultimate tensile strength, elongation. values and Vickers hardness. The chemical composition of test specimens was analyzed by both emission spectrography and wet gravitation method with a 1.5gm of low gold ingot. The tensile properties and Vickers hardness was determined with cast specimens treated in following three conditions; as-cast, softening heat treatment and hardening heat treatment. The tensile testing bars were cast in accordance with the model designed by Gettleman and Harrison (1969) which was modified from the A. D. A. Specification No. 14 for dental chromium-cobalt casting alloy. Nine tensile test specimens were made from a split silicone mold for each of the test alloys to the size of 2.5mm in diameter and a gauge length of 10mm. All four alloys were handled in accordance with conventional methods used in Type III gold alloys. Ultimate tensile strength and elongation were measured on an Instron Universal Tensile Testing Machine (Model 1125, Japan) operated at a crosshead rate of 0.1cm/min. Elongation values were measured using Digital Measuring Microscope (MS-152, FUSOH, Japan). Vickers hardness was determined with a Vickers Hardness Tester (Model VKH-l, Japan) at a 1.0kg load on a mounted tensile test specimen. The following results were obtained from this study; 1. All tested alloys were composed of Au, Ag, Pd, Cu, Zn and Fe in common. The composition rate of gold for all four alloys was found in the range of $42{\sim}47$ weight % as shown below. Alloy A; Au 45%, Ag 40.2%, Pd 5.76%, others 9.04%. Alloy B; Au 47.1%, Ag 29.03%, Pd 6.98%, others 16.92%. Alloy C; Au 45%, .Ag 26.9%, Pd 6.83%, others 21.07%. Alloy D; Au 41.8%, Ag 34.4%, Pd 6.95%, others 16.85%. 3. The ultimate tensile strength of the four alloys was in the range of $31{\sim}82kg/mm^2$. The test results were shown in the below order from the highest value; As-cast condition; D, B, C, A. Softening heat treament; B, C, D, A. Hardening heat treatment; D, B, C, A. 4. The test :results of the elongation rate for each alloy were in the range of $0.5{\sim}18%$. The test results were shown in the below order from the highest value; As-cast condition; A, D, B, C. Softening heat treatment; A, C, D, B. Hardening heat treatment; C, D, B, A. 5. Vickers hardness for each of the four alloys was in the range of $120{\sim}230$. The test results were shown in the below order from the highest value; As-cast condition; C, B, D, A Softening heat treatment; D, B, C, A. Hardening heat treatment; D, A, C, B. 6. There were no differences in the physical properties between as-cast condition and softening heat treatment.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.153-169
• /
• 2012

Exhibitions have played a key role of effective marketing activity which directly informs services and products to current and potential customers. Through participating in exhibitions, exhibitors have got the opportunity to make face-to-face contact so that they can secure the market share and improve their corporate images. According to this economic importance of exhibitions, show organizers try to adopt a new IT technology for improving their performance, and researchers have also studied services which can improve the satisfaction of visitors through analyzing visit patterns of visitors. Especially, as smart technologies make them monitor activities of visitors in real-time, they have considered booth recommender systems which infer preference of visitors and recommender proper service to them like on-line environment. However, while there are many studies which can improve their performance in the side of new technological development, they have not considered the choice factor of visitors for booth recommender systems. That is, studies for factors which can influence the development direction and effective diffusion of these systems are insufficient. Most of prior studies for the acceptance of new technologies and the continuous intention of use have adopted Technology Acceptance Model (TAM) and Extended Technology Acceptance Model (ETAM). Booth recommender systems may not be new technology because they are similar with commercial recommender systems such as book recommender systems, in the smart exhibition environment, they can be considered new technology. However, for considering the smart exhibition environment beyond TAM, measurements for the intention of reuse should focus on how booth recommender systems can provide correct information to visitors. In this study, through literature reviews, we draw factors which can influence the satisfaction and reuse intention of visitors for booth recommender systems, and design a model to forecast adaptation of visitors for booth recommendation in the exhibition environment. For these purposes, we conduct a survey for visitors who attended DMC Culture Open in November 2011 and experienced booth recommender systems using own smart phone, and examine hypothesis by regression analysis. As a result, factors which can influence the satisfaction of visitors for booth recommender systems are the effectiveness, perceived ease of use, argument quality, serendipity, and so on. Moreover, the satisfaction for booth recommender systems has a positive relationship with the development of reuse intention. For these results, we have some insights for booth recommender systems in the smart exhibition environment. First, this study gives shape to important factors which are considered when they establish strategies which induce visitors to consistently use booth recommender systems. Recently, although show organizers try to improve their performances using new IT technologies, their visitors have not felt the satisfaction from these efforts. At this point, this study can help them to provide services which can improve the satisfaction of visitors and make them last relationship with visitors. On the other hands, this study suggests that they managers along the using time of booth recommender systems. For example, in the early stage of the adoption, they should focus on the argument quality, perceived ease of use, and serendipity, so that improve the acceptance of booth recommender systems. After these stages, they should bridge the differences between expectation and perception for booth recommender systems, and lead continuous uses of visitors. However, this study has some limitations. We only use four factors which can influence the satisfaction of visitors. Therefore, we should development our model to consider important additional factors. And the exhibition in our experiments has small number of booths so that visitors may not need to booth recommender systems. In the future study, we will conduct experiments in the exhibition environment which has a larger scale.

• Journal of Preventive Medicine and Public Health
• /
• v.12 no.1
• /
• pp.13-23
• /
• 1979

A study was carried out from October 1977 to September 1978 in order to develope health care delively system which will meet to rural area in Korea. For the study objective a model of health care delivery system of Myun (township) area was developed which is adopted the net-work of village health voluntary worker who will play the role of bridge for communication related with health and illness between families or village people and health subcenter, and :he model health care delivery system net-work was set in the area of Soodong Myun, Yangju Gun. which is the rural health demonstration area of Ewha Womans University since 1972. The activities and attitude of 22 village health voluntary workers were observed and analized. during the study period. The results are as follows; 1. For the field activities of village health voluntary workers. a guide line which is described with specific behavioral objectives was developed and used for not only training of the workers but also evaluation of their field activities. 2. During the study period, the number of 971 village people were served primary health care service by village health voluntary worker and the service was classified largely into symptomatic medications (92%) and preventive measures (8%). 3. Comparative percentage of the number of 894 symptomatic cases cared by village health voluntary workers to 5,695 cases of patient treated by Soodong Health Subcenter during the same period was 15.7%. 4. Annual utility rate of village health voluntary worker by Myun total people was 16.1% but utility rate by Rie was varied from 38.2% to 2.8% which shown there were considerable differences in each Rie. In order to settle the village health care service, the obstructive factors of utility should be detected and their counter measure must be taken. 5. As the health need of village people increases, it is expected that the supplement of drug excluding present sit basic drugs is inevitable, but considering the ability of village health voluntary worker, the selection of additional drugs and education, plan should be carefully studied. 6. It is desirable that a financial resource for supplementary purchase of first aid kit, drugs and materials whould be alloted from village public fund like Saemaeul Women's Club fund, which has already practiced in a few villages in the study area. 7. As pointed out by village health voluntary workers, in order to improve the village health, village leaders should be in the center of it and the cooperation of whole village people is a core of healthful village development, and it is reasonable that the health subcenter backs up these voluntary health activities by village people in techniques. 8. It seems effective that a supplementary education for village health voluntary worker be accomplished by a planned education through regular meetings like worker's monthly meeting and irregular post guide when Myun Health Workers can handle the problems found during the round trip of villages. 9. It is desirable that village health voluntary workers, who are recommended by a civil voluntary organization like Saemael Woman's Club, are charged by natural villagc unit, are given a function of village health care service and used through basic education at health subcenter. 10. It is advisable that the village health voluntary worker's service is compensated not by a form of money, but by other way such as an exemption of medical fee of worker herself or her families in health subcenter can be one method. 11. Daily health activities of each village health voluntary worker should be reported to health subcenter by biweekly or monthly in order to get not only for basic data of the program but also for evaluation the program. It is recomandable that the report form should be simple and clear enough for village health voluntary worker to fill it effectively. 12. Village health care service should be developed into a Saemaeul Movement in which village people actively participate. For this, the appointed function of village health voluntary worker should be absorbed into those of living Environment Betterment Section or Family Planning Section of Saemaeul Women's Club or it is desirable that establish a new section, Village Health Promoting Section and make it involve the appointed functions of those sections mentioned above.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.181-186
• /
• 2003

The satellite navigation system is widely used for identifying a user's position regardless of weather or geographic conditions and also make effect on new technology of marine LBS(Location Based Service), which has the technology of geographic information such as the ENC. Generally, there are conceivable systems of marine LBS such as ECDIS, or ECS that use the ENC itself with powerful processor in installed type on ships bridge. Since the ENC is relatively heavy structure with dummy format for data transfer between different systems, we should reduce the ENC to small and compact size in order to use it in mobile platform. In this paper, we assumed that the mobile system like PDA, or Webpad can be used for small capability of mobile platform. However, the ENC should be updated periodically by update profile data produced by HO. If we would reduce the ENC without a consideration of update, we could not get newly updated data furthermore. As summary, we studied considerations for ENC reduction with update capability. It will make the ENC be useful in many mobile platforms for various applications.

• Journal of Life Science
• /
• v.34 no.7
• /
• pp.476-484
• /
• 2024

Although two-dimensional (2D) monolayer cell culture models are still widely used as the optimal models for anticancer activity research, three-dimensional (3D) multicellular tumor spheroid (3D MTS) models that can better approximate the tumor environment can offer an alternative to bridge the gap between in vitro and animal model studies. Isoalantolactone is among the sesquiterpene lactones found in medicinal plants, including the roots of Elecampane (Inula helenium L.), and is known to have various pharmacological activities, including anticancer activity. In this study, we investigated whether the anticancer activity of isoalantolactone observed in 2D models could be reproduced in a 3D MTS model derived from human hepatocellular carcinoma (HCC) Hep3B cells. According to our results, isoalantolactone inhibited the formation of MTSs in a manner dependent on the treatment concentration, which was accompanied by an increase in reactive oxygen species (ROS) generation. In particular, as isoalantolactone treatment and the culture time increased, the area of proliferating cells was replaced by cells in which apoptosis was induced. Additionally, in MTSs, isoalantolactone increased the expression of death-receptor-related proteins and the activity of caspase-3, and it decreased the expression of the Bax/Bcl-2 expression ratio and total poly(ADP-ribose) polymerase. However, when the production of ROS was artificially blocked, all these changes caused by isoalantolactone were attenuated and the cell survival rate of MTS cells was restored. Therefore, the results of this study suggest that the induction of apoptosis in Hep3B cell-derived MTSs by isoalantolactone is achieved through the activation of extrinsic and intrinsic pathways and is ROS-dependent.