• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.1-8
• /
• 2004

ANL에서 개발한 유 무기 복합의 신이온교환수지인 Diphosil은 silica 물질에 diphosphonic acid 그룹을 결합시킨 구조를 가지고 있다. Diphosil을 원전 운영 중 발생되는 방사성폐액 처리에 적용하기 위해 주대상 핵종인 $^{137}Cs,\;^{60}Co$을 사용하여 흡착 평형과 컬럼 실험을 수행하였다. 흡착 평형 실험을 통하여 $^{137}Cs$과 $^{60}Co$의 제거율과 그 제거율에 미치는 다양한 조건에서 비방사성 이온의 영향을 조사하였다. 대상 핵종에 대한 파과곡선은 모의 방사성 폐액을 이용한 실험실 수준의 컬럼 실험을 통해 구하였고, Diphosil의 제거능력을 현재 원전에서 쓰이고 있는 Amberlite IRN 77 수지와 비교하였다.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.305-312
• /
• 2011

A primary interest of this work is to develop an efficient and powerful repetitive pulser system for the application of ultra wide band generation. The important component of the pulser system is a small-sized coaxial type spark gap with planar electrodes filled with SF6 gas. A repetitive switching action by the coaxial spark gap generates two consecutive pulses in less than a microsecond with rise times of a few hundred picoseconds (ps). A set of several parameters for the repetitive switching of the spark gap is required to be optimized in charging and discharging systems of the pulser. The parameters in the charging system include a circuit scheme, circuit elements, the applied voltage and current ratings from power supplies. The parameters in the discharging system include the spark gap geometry, electrode gap distance, gas type, gas pressure and the load. The characteristics of the spark gap discharge, such as breakdown voltage, output current pulse and recovery rate are too dynamic to control by switching continuously at a high pulse repetition rate (PRR). This leads to a low charging efficiency of the spark gap system. The breakthrough of the low charging efficiency is achieved by a parallel operation of two spark gaps system. The operational behavior of the two spark gaps system is presented in this paper. The work has focused on improvement of the charging efficiency by scaling the PRR of each spark gap in the two spark gaps system.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2384-2393
• /
• 2018

Porous alginate-based hydrogel beads (porous ABH) have been prepared through a facile and sustainable template-assisted method using nano-calcium carbonate and nano-$CaCO_3$ as pore-directing agent for the efficient capture of methylene blue (MB). The materials were characterized by various techniques. The sorption capacities of ABH towards MB were compared with pure sodium alginate (ABH-1:0) in batch and fixed-bed column adsorption studies. The obtained adsorbent (ABH-1:3) has a higher BET surface area and a smaller average pore diameter. The maximum adsorption capacity of ABH-1:3 obtained from Langmuir model was as high as $1,426.0mg\;g^{-1}$. The kinetics strictly followed pseudo-second order rate equation and the adsorption reaction was effectively facilitated, approximately 50 minutes to achieve adsorption equilibrium, which was significantly shorter than that of ABH-1:0. The thermodynamic parameters revealed that the adsorption was spontaneous and exothermic. Thomas model fitted well with the breakthrough curves and could describe the dynamic behavior of the column. More significantly, the uptake capacity of ABH-1:3 was still higher than 75% of the maximum adsorption capacity even after ten cycles, indicating that this novel adsorbent can be a promising adsorptive material for removal of MB from aqueous solution under batch and continuous systems.

• Advances in environmental research
• /
• 제3권2호
• /
• pp.163-172
• /
• 2014

Magnetite was chosen as a typical adsorbent to study its phosphate adsorption capacity in water body with low concentration of phosphorus (below $2mg\;PL^{-1}$). Magnetite was collected from Luoyang City, Henan Province, China. In this research, three factors have been studied to describe the adsorption of phosphate on magnetite, which was solution concentration (concentration ranging from 0.1 to $2.5mg\;PL^{-1}$), suspension pH (1 to 13) and temperature (ranging from $10^{\circ}C$ to $40^{\circ}C$). In addition, the modified samples had been characterized with XRD and FE-SEM image. The results show that iron ions contains in magnetite were the main factors of phosphorus removal. The behavior of phosphorus adsorption to substrates could be fitted to both Langmuir and Freundlich isothermal adsorption equations in the low concentration phosphorus water. The theoretical saturated adsorption quantity of magnetite is 0.158 mg/g. pH has great influence on the phosphorus removal of magnetite ore by adsorption. And pH of 3 can receive the best results. While temperature has little effect on it. Magnetite was greatly effective for phosphorus removal in the column experiments, which is a more practical reflection of phosphorous removal combing the adsorption isotherm model and the breakthrough curves. According to the analysis of heavy metals release, the release of heavy metals was very low, they didn't produce the secondary pollution. The mechanism of uptake phosphate is in virtue of chemisorption between phosphate and ferric ion released by magnetite oxidation. The combined investigation of the magnetite showed that it was better substrate for water body with low concentration of phosphorus.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제18권2호
• /
• pp.456-477
• /
• 2024

With information technology's rapid development, the Internet faces serious security problems. Studies have shown that malware has become a primary means of attacking the Internet. Therefore, adversarial samples have become a vital breakthrough point for studying malware. By studying adversarial samples, we can gain insights into the behavior and characteristics of malware, evaluate the performance of existing detectors in the face of deceptive samples, and help to discover vulnerabilities and improve detection methods for better performance. However, existing adversarial sample generation methods still need help regarding escape effectiveness and mobility. For instance, researchers have attempted to incorporate perturbation methods like Fast Gradient Sign Method (FGSM), Projected Gradient Descent (PGD), and others into adversarial samples to obfuscate detectors. However, these methods are only effective in specific environments and yield limited evasion effectiveness. To solve the above problems, this paper proposes a malware adversarial sample generation method (PixGAN) based on the pixel attention mechanism, which aims to improve adversarial samples' escape effect and mobility. The method transforms malware into grey-scale images and introduces the pixel attention mechanism in the Deep Convolution Generative Adversarial Networks (DCGAN) model to weigh the critical pixels in the grey-scale map, which improves the modeling ability of the generator and discriminator, thus enhancing the escape effect and mobility of the adversarial samples. The escape rate (ASR) is used as an evaluation index of the quality of the adversarial samples. The experimental results show that the adversarial samples generated by PixGAN achieve escape rates of 97%, 94%, 35%, 39%, and 43% on the Random Forest (RF), Support Vector Machine (SVM), Convolutional Neural Network (CNN), Convolutional Neural Network and Recurrent Neural Network (CNN_RNN), and Convolutional Neural Network and Long Short Term Memory (CNN_LSTM) algorithmic detectors, respectively.

• 상하수도학회지
• /
• 제34권5호
• /
• pp.323-334
• /
• 2020

Adsorption by granule activated carbon(GAC) is recognized as an efficient method for the removal of perfluorinated compounds(PFCs) in water, while the poor regeneration and exchange cycles of granule active carbon make it difficult to sustain adsorption capacity for PFCs. In this study, the behavior of PFCs in the effluent of wastewater treatment plant (S), the raw water and the effluents of drinking water treatment plants (M1 and M2) located in Nakdong river waegwan watershed was monitored. Optimal regeneration and exchange cycles was also investigated in drinking water treatment plants and lab-scale adsorption tower for stable PFCs removal. The mean effluent concentration of PFCs was 0.044 0.04 PFHxS g/L, 0.000 0.00 PFOS g/L, 0.037 0.011 PFOA g/L, for S wastewater treatment plant, 0.023 0.073 PFHxS g/L, 0.000 0.00 PFOS g/L, 0.013 0.008 PFOA g/L for M1 drinking water treatment plant and 0.023 0.073 PFHxS g/L, 0.000 0.01 PFOS g/L, 0.011 0.009 PFOA g/L for M2 drinking water treatment plant. The adsorption breakthrough behaviors of PFCs in GAC of drinking water treatment plant and lab-scale adsorption tower indicated that reactivating carbon 3 times per year suggested to achieve and maintain good removal of PFASs. Considering the results of mass balance, the adsorption amount of PFCs was improved by using GAC with high-specific surface area (2,500㎡/g), so that the regeneration cycle might be increased from 4 months to 10 months even if powdered activated carbon(PAC) could be alternatives. This study provides useful insights into the removal of PFCs in drinking water treatment plant.

• 대한환경공학회지
• /
• 제28권12호
• /
• pp.1280-1286
• /
• 2006

활성탄 재질별 신탄에서의 1,4-dioxane에 대한 흡착능을 평가한 결과, 석탄계 신탄의 파과시점은 BV 3600, 야자계와 목탄계 신탄의 경우는 BV 1440과 144 정도로 나타났다. 1,4-dioxane에 대한 최대 흡착량(X/M)은 석탄계 활성탄이 578.9 ${\mu}g/g$으로 가장 높았으며, 다음으로 야자계 142.3 ${\mu}g/g$, 목탄계 7.4 ${\mu}g/g$이었다. CUR은 석탄계 활성탄의 경우 0.48 g/일, 야자계와 목탄계 활성탄은 1.41 g/일과 6.9 g/일로 나타났으며 야자계와 석탄계 활성탄의 k값은 17.9와 91.5로 나타났다. 오존 단독처리 공정에서의 1,4-dioxane 제거특성을 평가해 본 결과, 2 mg/L의 오존 투입농도에서는 1,4-dioxane의 제거율이 38%인 반면 5 mg/L 고농도 오존처리로 87%의 제거율을 나타내었다. 전처리 산화공정이 없는 BAC 공정(3.1년 및 5년 이상 사용탄)에서는 부착 미생물에 의한 생물분해에 의한 제거는 없었으며 2와 5 mg/L $O_3+BAC$ 공정에서 EBCT를 $10{\sim}30$분으로 하여 운전하였을 경우 오존 단독공정에 비해 $2%{\sim}6%$ 정도 제거율이 증가한 것으로 나타나 오존처리 후의 BAC 공정은 1,4-dioxane 제거에 큰 효과가 없었다. 1,4-dioxane이 고도 정수처리공정으로 유입되었을 시 GAC 공정을 채택한 정수장의 경우 석탄계 신탄을 사용하는 것이 가장 바람직하며, 오존/BAC 공정의 경우는 BAC 접촉조의 EBCT를 증가시키는 운전 방법 보다 오존의 투입농도를 증가시키거나 오존 접촉조의 체류시간을 증가시켜 운전하는 방식이 1,4-dioxane 제거에 대해 효과적인 운전 방법으로 조사되었다.

• 분석과학
• /
• 제6권5호
• /
• pp.489-499
• /
• 1993

Aresenazo I-XAD-2 킬레이수지를 합성하고 이 수지에 대한 U(VI) 이온의 흡착 거동을 조사 검토하였다. 킬레이트수지는 Arsenazo I 킬레이트제와 Amberlite XAD-2의 디아조늄 짝지움 반응에 의해서 합성하였으며 원소 분석법과 적외선 분광법으로 확인하였다. U(VI) 이온 흡착의 최적 조건을 찾기 위해서 pH, U(VI) 이온농도와 진탕 시간에 관해서 조사하였다. U(VI) 이온에 대한 킬레이트수지의 전체 흡착능은 pH 4.0~4.5 범위에서 0.39mmol U(VI)/g resin이었고, pH값이 증가함에 따라 흡착능이 증가하였다. Aresenazo I-XAD-2 킬레이트 수지에 대한 U(VI) 이온의 흡착 메카니즘은 U(VI) 이온과 $H^+$ 이온 사이의 경쟁반응임을 확인하였다. 컬럼법으로 구한 U(VI) 이온의 돌파점 부피와 전체 흡착능은 각각 600ml, 0.38mmol U(VI)/g resin이었다. 3M $HNO_3$와 3M $Na_2CO_3$의 탈착용액을 사용하여 구한 회수율은 90~96%였다. 따라서 본 연구에서는 합성한 Arsenaso I-XAD-2 킬레이트수지는 자연수 바닷물 중에 함유된 U(VI) 이온의 분리와 농축에 매우 유용함을 알았다.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.733-742
• /
• 2000

일상에서 그대로 폐기되고 있는 달걀껍질을 폐수처리에 이용하기 위하여 물성조사와 기초적인 흡착 및 중화실험을 수행하였다. 달걀껍질의 특성파악 및 온도에 따른 물성 변화를 검토하기 위하여 각각 $105^{\circ}C$와 $700^{\circ}C$에서 처리한 시료의 용도에 따른 구조변화를 FT-IR 분석법 및 X-선 회절법을 이용하여 검토하였다. FT-IR 분석결과, $700^{\circ}C$에서 달걀껍질의 주성분인 $CaCO_3$의 열분해에 따른 $CO_2$의 방출로 인해 $105^{\circ}C$의 경우와는 달리 C-O absorption band 의 감소가 관찰되었고, X-선 회절분석에서는 $700^{\circ}C$에서는 $105^{\circ}C$의 경우와 거의 유사한 $CaCO_3$ 특성 peak가 나타났으며 $CaCO_3$가 CaO로 완전히 전환되는 온도인 $850^{\circ}C$에서 처리한 시료에 대해 CaO 특성 회절스펙트럼이 관찰되었다. TGA/DTA 분석에 있어서는 약 $600^{\circ}C$에 이르기까지는 무게 감량이 서서히 진행되다가 $600{\sim}800^{\circ}C$의 온도범위에서 무게감량이 급격히 진행되었으며 그 이상의 온도에서는 무게감량이 더 이상 진행되지 않았다. 또한, 무게감량이 급격히 진행되는 온도구간에서 주된 흡열 peak가 형성되어 $CO_2$ 방출에 따른 열적 특성이 파악되었다. 달걀껍질의 고정층에 의한 연속흡착 실험 결과, 파과시간의 비, 총괄 이동 단위수, 그리고 물질전달계수 등이 column이 진행됨에 따라 그 값이 증가함이 관찰되어 연속흡착에 따른 물질전달의 분배효과를 관찰할 수 있었다. 산성폐수에 대한 중화효과의 경우에 있어서는 각 무기산의 경우 상호 유사한 경향이 나타났으나 $H_2SO_4$의 경우 중화산물인 $CaSO_4$의 형성으로 인해 중화효과가 감소되는 것으로 사료되었다.