• 한국융합학회논문지
• /
• 제10권6호
• /
• pp.281-286
• /
• 2019

현대인에게 외모는 경쟁력의 수단이며 이러한 현대인의 욕구에 위해요소로 작용하는 요인 중 하나는 백모(白毛)이다. 백모를 커버하여 타인에게 아름다운 외모를 표출해야 하는 현대인을 위하여 백모 염모제 시술 후 모발분석을 실시하였다. 실험결과 1N-3N 화학염모제의 control 대조군과 1N부터 3N 실험군 간에 최대하중, 최대 인장 강도, 최대 신장률, 파단하중, 파단강도, 파단 신장률, 평가구간에 따른 최대 모듈러스 및 tangential modulus가 대체적으로 유의적인 차이를 보였다. 최대 하중과 최대 인장강도, 파단 하중과 파단 강도가 대조군에 비해 커다란 경향을 보인 반면 최대 신장률과 파단 신장률은 대조군이 가장 큰 값으로 실험군 처리에 따라 신장률이 감소하였다. 평가구간에 따른 최대 모듈러스와 tangential modulus는 대조군에 비해 1N-3N 실험군들이 0~0.15와 0.15~2.5 등 모든 strain 구간에서 대체적으로 높게 나타났다. 백모 커버용 산화염모제의 시술 전후 모발의 미용학적 변화에 대한 연구를 바탕으로 올바른 화학염모제 제품의 선택, 적당한 도포량 및 방치시간 등을 효과적으로 선택할 수 있는 기초자료로 활용되리라 사료된다.

• 농업과학연구
• /
• 제26권1호
• /
• pp.21-30
• /
• 1999

본 연구는 골판지고지의 가장 중요한 물성인 강도적 성질을 증대시키기 위하여 섬유의 전처리 방법으로서 Hobart mixer를 사용하여 섬유 내부의 결합제거 및 섬유표면에 Microcompression을 형성하여 개질처리 하였으며, 4가지 방법의 고해방법(Valley beater, Kady mill, Impact refining)을 채택하여 골판지고지의 최적고해 방법을 찾는데 그 목적을 두고 이 연구를 수행하였다. 그 결과는 다음과 같다. 1. 섬유장감소를 적게 유발하는 고해방법으로는 Kady mill과 PFI mill의 고해방법 이었으며 고해시 Curl을 펴주는 고해방법을 Kady mell과 Valley beater의 고해방법이 적절하였다. 2. 열단장은 Valley beating의 고해방법에 의하여 강도가 가장 많이 증가되었으며 인열강도는 가장 많이 감소하였다. 섬유전처리를 한 Comp-1과 Comp-2는 고해방식과 상관없이 열단장을 전체적으로 약 10% 증대시켰다. 3. 인열강도는 Comp-1, Comp-2의 전처리방법과 PFI mill 고해로 증대할수 있었다. 4. 파열강도는 Comp-1, Comp-2의 전처리방법과 Valley beater 고해로 증대할수 있었다. 5. 인열강도를 우지한채로 열단장을 가장 높이는 방법은 섬유전처리 방식인 Comp-1이나 Comp-2를 사용하여 Valley beating을 이용하는 방법으로 판단되었다.

• 한국수산과학회지
• /
• 제11권1호
• /
• pp.39-48
• /
• 1978

본 연구에서는 3-course 구조와 2-course 구조의 랏쉘그물감을 선정하여 그 강도 특성을 조사하고, 이를 구성 섬유의 재료가 같은 매듭그물감 및 관통 그물감의 강도와 비교했다. 실험으로 부터 얻어진 결과를 요약하면 다음과 같다. 1. 랏쉘그물실의 강도가 랏쉘마디에서 감소하느 원인은 장력에 의한 마디의 변형 및 마디에서의 yarn 간의 마찰력에 주로 기인한다고 간주되며, 강도 감소율은 종인에서 $13\%$, 횡인에서 $22\~26\%$ 정도이다. 2. 랏쉘마디는 3-course 구조의 것이 2-course 구조의 것보다 모든 방향의 인장에서 약간 강하고, 마디 형태의 변형도 적다. 3. 주름을 준 상태에서의 랏쉘마디의 강도 $T_R$는 인접하는 다리가 이루는 각을 $\varphi$라 하면 $T_R=T_{R0}-k\varphi$ 로 주어진다. 단, $R_{R0}$는 $\varphi$가 $0^{\circ}$때의 $T_R$의 값, k는 상수이다. 4. 랏쉘그물감의 항장력 ${\sigma}R$ 및 파단에 소요되는 일량 $E_R$는 인장하는 쪽의 그물코 수를 N라 하면 ${\sigma}R=KN$ 또는 ${\sigma}R=K_RN$ 및 $E_R=AN$으로 표시되고, 파단신도는 N에 관계없이 거의 일정하다. 단, K 및 A는 상수이다. 5. 몇개의 다리가 미리 절단되어 있는 경우의 랏쉘그물감의 파단은 미리 절단되어 있는 다리에 인접한 다리의 마디로부터 일어나며, 그때의 항장력, 파단에 소요되는 일량 몇 파단신도의 감소는 비록 하나의 다리가 미리 절단되어 있는 경우라 할지라도 상당히 크다. 6. 랏쉘그물감의 파열강도는 두개의 다리를 인장한 경우의 랏쉘마디의 강도와 거의 같다. 7. 현용의 주된 세 종류의 그물감에 대해 그들을 구성하는 다리의 denier 수를 기준으로 하면, 관통마디가 가장 강하고, 매듭의 강도는 관통마디의 강도의 $69\~76\%$ 정도이다. 랏쉘마디는 종인시는 관통마디 강도의 $71\~74\%$ 로서 매듭과 거의 같은 강도를 가지지만, 횡인시는 매듭의 강도보다 약하여 $62\~67\%$를 나타낸다.

• Geomechanics and Engineering
• /
• 제34권1호
• /
• pp.103-113
• /
• 2023

This study focused on understanding the relationship between the design of a tunnel boring machine disc cutter ring and its rock-breaking efficiency, as well as the applicable conditions of different cutter ring types. The discrete element method was used to establish a numerical model of the rock-breaking process using disc cutters with different ring types to reveal the development of rock damage cracks and variation in cutter penetration load. The calculation results indicate that a sharp-edged (V-shaped) disc cutter penetrates a rock mass to a given depth with the lowest load, resulting in more intermediate cracks and few lateral cracks, which leads to difficulty in crack combination. Furthermore, the poor wear resistance of a conventional V-shaped cutter can lead to an exponential increase in the penetration load after cutter ring wear. In contrast, constant-cross-section (CCS) disc cutters have the highest quantity of crack extensions after penetrating rock, but also require the highest penetration loads. An arch-edged (U-shaped) disc cutter is more moderate than the aforementioned types with sufficient intermediate and lateral crack propagation after cutting into rock under a suitable penetration load. Additionally, we found that the cutter ring wedge angle and edge width heavily influence cutter rock-breaking efficiency and that a disc cutter with a 16 to 22 mm edge width and 20° to 30° wedge angle exhibits high performance. Compared to V-shaped and U-shaped cutters, the CCS cutter is more suitable for soft or medium-strength rocks, where the penetration load is relatively small. Additionally, two typical case studies were selected to verify that replacing a CCS cutter with a U-shaped or optimized V-shaped disc cutter can increase cutting efficiency when encountering hard rocks.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.97-100
• /
• 2005

The recent Bistable Nematic ($BiNem{(R)}$) LCD technology presents long term bistability, high level passive matrix multiplexing and high optical quality. The BiNem device, based on anchoring breaking, needs specific low anchoring strength materials - alignment layers and liquid crystal mixtures. We present here our approach to develop nematic mixtures with wide enough temperature range and low zenithal anchoring energy.

• 한국염색가공학회지
• /
• 제24권1호
• /
• pp.69-78
• /
• 2012

This paper surveys the physical properties of the MWNT dispersion solution dispersed with the three types of solvents and of the polyurethane composite film for improvement of mechanical properties and electrical characteristics of PU/MWNT composite film. For this purpose, the MWNT dispersed solution was mixed with three types of solvent such as IPA, MEK and Toluene and then mixed with polyurethane (100part) with variation of loading content (0, 10, 20, 30, 40, 50 part) of MWNT dispersed solution in the ultrasonic wave dispersion apparatus. And eighteen PU/MWNT composite films were prepared as specimens. The various physical properties of these PU/MWNT films were measured and discussed with the loading content of three types of MWNT dispersed solutions. The highest absorbancy among the three types of dispersed solutions was shown in the IPA/MWNT solution. But the absorbancy of PU/MWNT films was not same as the solution. The low electrical surface and volume resistivity of PU/MWNT film were shown at the condition of 20 and 10 parts loading of IPA/MWNT dispersed solution, respectively. The low triboelectricity of PU/MWNT film was shown at the condition of above 30part loading of IPA/MWNT dispersed solution. The breaking strength and strain of PU/MWNT film prepared with IPA/MWNT dispersed solution were decreased with increasing loading content of IPA/MWNT from 10 to 40 parts. The maximum breaking strength and breaking strain according to the dispersion solution were shown on the IPA/MWNT dispersed solution. The uniform dispersion of PU/MWNT film according to the loading content of MWNT solution was shown by surface image analysis on the films dispersed with IPA.

• Bulletin of the Korean Chemical Society
• /
• 제15권10호
• /
• pp.857-860
• /
• 1994

We have calculated the ${\pi}$-electron density, atom self-polarizability, and free valence on each atom of N-(2-chlorobenzyl)-pyridinium, N-(benzyl)-2-chloropyridinium, and N-(2-chlorobenzyl)-2-chloropyridinium salts using a simple Huckel method in order to discuss their intramolecular photocyclization reaction in a qualitative method. Our calculation qualitatively predicts that photocyclization occurs through forming radicals as a reaction intermediate by breaking a C-Cl bond after photoexcitation into a triplet state via intersystem crossing from an initially excited singlet state. We noticed that this C-Cl bond breaking is aided by ${\pi}$-complex formation between a chlorine atom and the ${\pi}$ -electrons of the neighboring ring in the triplet state and a stronger ${\pi}$-complex bond makes C-Cl bond breaking, i.e., radical formation, much easier. A chlorine atom will form a stronger ${\pi}$ -complex bond to a benzyl ring of N-(benzyl)-2-chloropyridinium than a pyridinium ring of N-(2-chlorobenzyl)-pyridinium because the former can donate its ${\pi}$-electron more easily than the latter. The chlorine at position 15 of N-(2-chlorobenzyl)-2-chloropyridinium salt in the excited state also provides its ${\pi}$-electron to the benzyl ring. So this ${\pi}$-electron can increase the bond strength of the $\pi-complex.$ Therefore, the strength of ${\pi}$-complex follows the order of N-(2-chlorobenzyl)-2-chloropyridinium, N-(benzyl)-2-chloropyridinium, and N-(2-chlorobenzyl)-pyridinium salts and thus the radical formation rate. This provides us with an intramolecular photocyclization reaction rate of the same order as given above.

• Asian-Australasian Journal of Animal Sciences
• /
• 제9권6호
• /
• pp.723-726
• /
• 1996

A water loaded pressure device using water as the breaking force was developed to evaluate eggshell strength and compared with a dropping ball techniques. Further, relationships of shell thickness and weight of eggs to shell strength were also studied. Values for both of the shell strength measuring methods showed a highly significant correlation (p < 0.001) with shell thickness. The water loaded pressure method had a much higher simple correlation coefficient for shell thickness (r = + 0.786) than the dropping ball method (r = + 0.577). The shell strength measured by the water loaded pressure method appeared not to be correlated to egg weight. On the other hand, the negative sign of the standard partial regression coefficient and the partial regression coefficient of egg weight in the estimated multiple regression equation implied that for a given shell thickness a larger egg tended to have less shell strength than a smaller egg.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.25-28
• /
• 2016

The Schmidt hammer test is one of the best nondestructive tests to measure the strength without breaking structures, which has been used to measure the strength of concrete structures in a simple way at construction sites. However, the future research is needed to apply Schmidt hammer in cold regions. This study is intended to investigate the correlation between unconfined compression test result of the oil storage facilities foundation taken at the King Sejong Antarctic Station and Schmidt hammer test result at the sample-taking site. Also, the equation for uniaxial compression strength using Schmidt hammer rebound value is proposed.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.619-624
• /
• 2012

In this study, MMT/fiber/polymer composites were fabricated by impregnating chopped strand glass mat into a vinylester resin mixed with clay. Tensile tests has been performed by using a universal testing machine to determine the effect of MMT addition on the tensile properties of MMT/chopped strand glass fiber/vinylester composites. And some pictures which are magnified cross section of breaking parts are has been taken by using a FE-SEM to confirm the behavior at breaking. The contents ratio of MMT applied in the composites were 0.5, 1.0, 1.5, and 2.0 wt% respectively. It has been found that the tensile strength and elastic modulus of MMT/chopped strand glass fiber/vinylester composites were improved at a proper content of MMT. Tensile strength and elastic modulus were maximized at a content of 1.0 wt% due to most effective dispersion of MMT. On the contrary, the failure strain was increased as MMT content was increased.