• Journal of Advanced Marine Engineering and Technology
• /
• 제40권7호
• /
• pp.574-579
• /
• 2016

기존의 연구에서 저항 성능을 정도 높게 추정하던 격자 시스템은 모형선의 길이 6-8m, 동적 트림 ${\pm}1^{\circ}$ 이하인 일반 대형 상선에 최적화되어 있다. 이러한 격자 시스템을 소형 어선과 같이 프루드 수 0.3~0.8, 동적 트림이 ${\pm}3^{\circ}$ 이상인 대상선에 적용할 경우 수치적 불안정성을 야기한다. 본 연구에서는 이러한 문제를 해결하기 위해 부심으로부터 입구 경계 조건의 길이를 줄이고, 자유수면의 각도에 따라 밀집된 격자 형태를 갖는 격자 시스템을 구성하였다. 상기 격자 시스템을 이용하여 설계 흘수와 밸러스트 흘수에서 다양한 선속에 대해 어선에 작용하는 저항을 수치 해석으로 계산하였으며, ITTC-1978 2차원 해석법을 이용하여 소형 어선의 유효마력을 추정하였다. 준추진효율 계수는 기존의 모형시험 자료를 활용하였으며, 설계 흘수에서 제동마력 추정을 통해 속도 성능을 평가하였다.

• 한국해안해양공학회지
• /
• 제19권5호
• /
• pp.418-428
• /
• 2007

Boussinesq 방정식에 의한 파랑전파의 계산과정 중 파랑의 비선형 상호작용 및 쇄파발생에 의하여 수치잡음이 흔히 발생하며 이 잡음을 적절히 제어하지 않을 경우 해가 급속히 발산하게 된다. 본 연구에서는 계산 중간과정에 주기적으로 적용하여 수치잡음을 제거하기 위한 세가지 형태의 저파수통과 필터(FFT 필터, 가우스 필터, 그리고 Shapiro 필터)의 특성에 대하여 고찰하였다. 경사면 파동장에 대한 기존의 수리실험 결과와 본 수치해석 결과를 비교하고 각 필터의 잡음 제거효과, 주 시그널의 보존성, 그리고 계산 소요시간에 대하여 검토하였다. 그 결과, Shapiro 필터의 매개변수(필터 요소수와 통과수, 그리고 필터적용주기)를 적절히 설정함으로써 계산의 정확성과 효율성을 잘 달성할 수 있는 것으로 나타났다. 적정한 매개변수 선정을 위해서는 다소의 시행착오적 계산이 요구되나 대체적으로 필터 요소수 4에 대하여 50이내의 필터 통과수와 $100{\sim}200$ 시간스텝 정도의 적용주기가 타당한 것으로 판단된다.

• 한국화재소방학회논문지
• /
• 제27권5호
• /
• pp.15-18
• /
• 2013

본 연구는 자연 발생적인 화재 및 방화자에 의한 화재를 탐지하는 고효율 저비용의 옥외형 화재경보시스템으로 중소문화재, 천연기념물 및 옥외 시설물 등 화재 발생 시 관리 감시가 취약한 곳을 대상으로 한 소방시스템의 옥외 적용시 성능 및 시험에 대한 것이다. 재래적 화재감지시스템으로부터 탈피하여 지능적인 이동형 무인 화재감지시스템의 도입을 위해 화재경보시스템 성능시험, 기능시험, 옥외 환경시험, 불꽃시험 및 EMI/EMS 적합시험 등을 실시하였다. 성능시험, 기능시험, 불꽃시험 및 옥외방치시험을 3개월간 실시한바 양호하였고, 온도변화 성능시험도 $-30{\sim}70^{\circ}C$에서 양호하였으며 EMI/EMS 시험도 적합하였다. 불꽃검출거리는 75 m까지 증가되었고 대기모드 전원은 4시간 증가, 운영모드 전원에서의 동작시간은 3일까지 가능하였으며 센서뿐만 아니라 영상으로 상황을 인지하는데 적합함을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제29권3호
• /
• pp.217-224
• /
• 2004

This research was conducted to test the feasibility of utilizing high-pressure water jets of over 1.0㎫ as a means of breaking and peeling garlic bulbs. High-pressure plunger pumps and flat-spray nozzles of varying orifice diameters and spray angles were utilized to supply water jets into a prototype peeling chamber made of transparent acrylic plates. Water jets were discharged from a total of six nozzles installed in such a way that three parallel nozzles face the other three. The cross-sectional area of the peeling chamber and the installation angle of the nozzles had critical effects on peeling performance. Small cross-sectional area was required so that total impact force of water jets on garlic could be increased. The optimum installation angles were around 4, 8, and 16$^{\circ}$ for the nozzles having 15, 40, and 65$^{\circ}$ spray angles, respectively. Best performance with 61.4% of completely-peeled garlics was obtained at a pressure of 1.94㎫ and a flow rate of 9.07 $\ell$/min for each nozzle. The peeling efficiency of the system was generally unsatisfactory due to the limited flow rate of the plunger pumps utilized. For better performance, it is recommended to increase flow rate while reducing operating pressure by utilizing other type of pumps.

• 수산해양기술연구
• /
• 제29권4호
• /
• pp.260-271
• /
• 1993

Due to depletion of fish resources as time goes on, the trawl fishing industries which have caught the demersal fish is confronting with financial difficulties. For the purpose of breaking these difficulties, trawlers are expanding the fishing targets to the midwater from bottom stock. The trawlers become to be able to detect the fish schools not only vertical but also horizontal direction by equipping the sonar system on board. Even though the operator locates the fish school by sonar, it is not easy to make a desirable catch of the fish school which is detected, for the reason of the maneuverring characteristics of trawler. For the purpose of enhancing the efficiency of a fish catch, the auther performed a series of on board experiments to investigate the maneuverablilites of midwater trawaler. The obtained results are summerized as follows: 1. The higher the RPM of main engine, the smaller the magnitude of turning circle. And it is smaller in the right than in the left turning 2. Towing speed varies irregularly under turning novenment. When the RPM of main engine being 560, 680 the angular velocities are 11.3deg/min, 22.5deg/min respectively. 3. The difference of new course distance between calculated by maneuverring indices and measured by experimental ship is high when altering course being large and towing speed low. 4. The faster the towing speed is, the shorter the new course distance becomes. When towing speed is same in right and left turning movement, the now course distance is shorter in case of right turning movement than in left. 5. It is considered to be convenient for a navigator to utilize the curves for altering course in order to steer the ship rapidly and accurately.

• 한국분말재료학회지
• /
• 제17권3호
• /
• pp.216-222
• /
• 2010

Self-standing $TiO_2$ nanotube arrays were fabricated by potentiostatic anodic oxidation method using pure Ti foil as a working electrode and ethylene glycol solution as electrolytes with small addition of $NH_4F$ and $H_2O$. The influences of anodization temperature and time on the morphology and formation of $TiO_2$ nanotube arrays were investigated. The fabricated $TiO_2$ nanotube arrays were applied as a photoelectrode to dye-sensitized solar cells. Regardless of anodizing temperature and time, the average diameter and wall thickness of $TiO_2$ nanotube show a similar value, whereas the thickness show a different trend with reaction temperature. The thickness of $TiO_2$ nanotube arrays anodized at $20^{\circ}C$ and $30^{\circ}C$ was time-dependent, but on the other hand its at $10^{\circ}C$ are independent of anodization time. The conversion efficiency is low, which is due to a morphology breaking of the $TiO_2$ nanotube arrays in manufacturing process of photoelectrode.

• 한국환경과학회지
• /
• 제27권2호
• /
• pp.75-81
• /
• 2018

At present research on mining backfill materials is being carried out to prevent ground subsidence and breaking by underground cavern of exhausted mines. However, backfill materials can cause secondary environmental issues such as ground pollution. To solve these issues, liner and cover materials are constructed before backfill materials constructed, to inhibit toxic substances form moving to the surroundings. Liner and cover materials, however, should have an accelerating performance after construction and when the accelerating performance is degraded, the work efficiency can be lowered, and the construction cost can be increased, by many rebound content. Therefore, this study develops mining liner and cover materials, and evaluates their accelerating performance and physical properties of liner and cover materials by types and content of accelerating agent. In case of aluminate accelerating agent, it is mixed with more than 5% of liner and cover materials(binder/ratio); thus an accelerating performance satisfying Korean Industrial Standards(KS) occurs, and in case of alkali-free accelerating agent, when it is mixed with more than 7%(binder/ratio), accelerating performance satisfying KS occurs. The more the accelerating agent capacity increases, the more compressive strength decreases. In addition, it is confirmed that compressive strength of aluminate accelerating agent is more degraded than compressive strength of the alkali-free accelerating agent. It is also confirmed that drying shrinkage stability of the alkali-free accelerating agent is better than the drying shrinkage stability of the aluminate accelerating agent.

• 한국철도학회논문집
• /
• 제12권2호
• /
• pp.254-259
• /
• 2009

국내 도시철도시스템에서 채용한 직류급전시스템에서 다이오드 정류시스템을 사용하여 역방향 조류가 불가능하다. 이에 따라 전동차의 감속 또는 제동시에 발생하는 회생 전력을 재활용하지 못하고 열에너지로 소비하게 된다. 잉여 회생 전력의 재활용은 에너지 이용의 극대화, 전동차의 제동 성능 향상 및 분진 감소 등의 환경 친화적인 효과를 얻을 수 있으며, 정류기와 역병렬로 인버터를 설치하여 타 계통으로 전달하거나 저장하는 형태로 가능하다. 본 논문에서는 발생한 잉여 회생 전력을 교류 전력으로 변환하여 고압배전계통이나 한전 계통으로 역송전이 기능한 회생용 인버터의 시험 설비 개발 및 성능시험에 대하여 제안하였다. 회생용 인버터 개발 후 개발품의 성능 시험을 위하여 직류급전시스템을 모의할 수 있는 교/직류 전원 설비 및 부하설비를 이용하여 회생용 인버터의 고유 성능을 시험 및 분석하였다.

• 한국실내디자인학회논문집
• /
• 제16권6호
• /
• pp.116-124
• /
• 2007

The purpose of this study is to find out the spatial characteristics of the multi-housing units in Seoul and Kyung-gi area since 2006. Literature review and content analysis were used for this study and 82units of the big size over $165m^2$ were analyzed to review such design characteristics as spatial composition, layout and linkage. Through this study, the following conclusions have been reached; 1) Most unit plans had 4LDK and 3bath types including family room as a public space. This results shows that family-room and bathroom has recently become more important than number of rooms in multi-housing units planning. 2) Diversity of plan figures such as mass-mixing, mass-separation and polygons(L, V-type)was showed in most unit plan, breaking from the standardized forms of box types. 3) Intermediated spaces such as foyers and halls in entrance zone were planned and sub-entrance into kitchen were planned for the various types of circulation and work-efficiency. Cases had private space separated from public space, the dispersion of rooms with the increase of connection by corridors, L-DK meaning the living room isolated from the dining and kitchen, partially located living room for a view in area distribution. The spatial planning of master-zone mostly consists of the types of two-rooms and an entry into a foyer(library, dress-powder room, bathroom and master bedroom). This study has a significant meaning on grasping current trend in Korean multi-housing and to provide information for future direction on housing-unit design.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.25-32
• /
• 2002

This study was conducted to develop a dry paddy seeder of strip tillage. The prototype is 8 rows drill seeder, which is composed of a strip tillage, sowing and fertilizing device, and pressing wheels to do the strip tillage, sowing, fertilizing, and draining ditch, simultaneously. The performances of prototype was evaluated through the investigation of fuel consumption, tillage torque, ratio of soil breaking, and economical efficiency and the results were compared with these of a dry paddy seeder that needs whole tillage. According to the USDA textural classification, the experiment field was composed of sandy loam which consisted of 56.8 of sand, 30.2 of silt and 13.0 % of clay, respectively. Its hardness ranged from 952 to 1,673 kPa depending on the soil depth, and its soil moisture content was 24.9%(d. b.) Fuel consumption of the prototype was 5,015g/hr at 2,000 rpm of engine, which was consequently 64% smaller than that of the conventional dry paddy seeder. For the tillage torque, it ranged from 132 to 206N$.$m depending on the tillage pitch, which was 10∼30% smaller than that of the conventional dry paddy seeder. The ratio of soil braking of the prototype was 87∼98%, whereas that of the conventional dry paddy seeder was 80∼97%. The working performance of the prototype was surveyed to be 3.8hours/ha, which was about 5 times higher than that of the conventional dry paddy seeder. The cost reduction of 26.3% was obtained by using the prototype.