• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.96-101
• /
• 2004

When the wind blows hard, most waves are breaking in sea. Breaking waves occur, exceeding limitation of wave steepness(wave height/wave length=l/7). Because a wave of single angular frequency couldn't generate the breaking phenomena at two dimensional ocean engineering basin, the breaking wave can be generated by the superposition of waves with various angular frequencies. We research how are the particle kinematics in the breaking wave and the magnitude of the breaking wave exciting force. We compare the force in a regular wave which has same specifications(wave height, period and length) as the breaking wave. Also the experimental results of wave exciting force and particle velocity are investigated by comparison on the analytic results using the potential theory.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.18-24
• /
• 2007

When the wind blows strong, most waves are breaking at sea. Breaking waves occur by exceeding the limitation of wave steepness (wave height/wave length = 1/7). Because a wave of single angular frequency couldn't generate the breaking phenomena at a two-dimensional ocean engineering basin, the breaking wave can be generated by the superposition of waves with various angular frequencies based on dispersion relation. This study investigates the particle kinematics in the breaking wave and the magnitude of the breaking wave exciting force at the breaking point and breaking region. We compare the regular wave load in a regular wave, which has same specifications (wave height, period and length), with the breaking waveload. Also, the experimental results of wave exciting force and particle velocity are investigated, by comparison with the analytic results using the potential theory.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1948-1953
• /
• 2005

The Teakwondo is composed of the breaking, competition and poomsea. In the hand breaking, the breaking impact of human is affected by the breaking posture. In this paper, impact analysis of the human model for breaking posture is carried out. The LifeMOD is used in breaking modeling and simulation. The simulation model createsthe human model to hit and to grasp a pine board. For the breaking, the poomsea motion of the hand joint inputs the splines pass condition. As the results, the reaction of human joint is presented

• Ocean Systems Engineering
• /
• 제12권4호
• /
• pp.439-459
• /
• 2022

This paper describes experimental studies of impact pressure generated by breaking regular waves in shallow water on a vertical cylinder. Experimental work was carried out in a shallow water flume using a 1:30 - scale model of a vertical rigid circular hollow cylinder with a diameter 0.2 m. This represents a monopile for shallow water offshore wind turbines, subjected to depth induced breaking regular waves of frequencies of 0.8 Hz. The experimental setup included a 1 in 10 sloping bed followed by horizontal bed with a constant 0.8 m water depth. To determine the breaking characteristics, plunging breaking waves were generated. Free surface elevations were recorded at different locations between the wave paddle to the cylinder. Wave impact pressures on the cylinder at a number of elevations along its height were measured under breaking regular waves. The depth-induced wave breaking characteristics, impact pressures, and wave run-up during impact for various cylinder locations are presented and discussed.

• 한국염색가공학회지
• /
• 제9권5호
• /
• pp.1-9
• /
• 1997

In the single yarn spinning process by the ring spinning system, the finer the fineness of yarn and the lower the twist coefficient, the lower the breaking strength and breaking elongation. The change of yarn specific volume to yarn number agreed with Peirce's formula in the range of Ne 50 to 70, but above that range the values of the experiment are higher than that of the formula. The change of diameter of yarn to the reciprocal of the square root of yarn number agreed with Peirce's formula in the range of under 0.14, but above that value the values of the experiment are higher than that of the formula. In breaking strength variation according to twist constant of single yarn, as the twist coefficient increased, breaking strength increased. At 5.8∼6.0 of twist coefficient the maximum breaking strength was shown, but above that value breaking strength decreased. Breaking elongation also showed a similar tendency. But at 6.0∼6.5 of twist coefficient the maximum breaking elongation was shown. Also spinning tension increased as twist coefficient increased. Twist coefficient, breaking strength and breaking elongation according to the number of coils stayed almost the same. Yarn spinning tension according to the number of coils at the maximum of diameter was the lowest value. The speed of the traveller at the maximum of diameter was the highest value.

• 한국항해항만학회지
• /
• 제39권5호
• /
• pp.385-391
• /
• 2015

In offshore, various external forces such as wind force, tidal current and impulsive breaking wave force act on offshore wind tower. Among these forces, impulsive breaking wave force is especially more powerful than other forces. Therefore, various studies on impulsive breaking wave forces have been carried out, but the soil reaction are incomplete. In this study, the p-y curve is used to calculate the soil reaction acting on the offshore wind tower when an impulsive breaking wave force occurs by typhoon. The calculation of offshore wind tower against impulsive breaking wave force is applied for the multi-layered soil. The results obtained in this study show that although the same wave height is applied, the soil reaction generated by impulsive breaking wave force is greater than the soil reaction generated by wave force.

• 한국해안해양공학회지
• /
• 제4권3호
• /
• pp.178-186
• /
• 1992

어떤 특정 위치에서 파속이 빠른 파가 느린 파를 추월하도록 여러가지 다른 주파수의 파를 중첩시킴으로써 심해쇄파에 대한 실험을 수행하였다. 예상 쇄파지점 근처에서 큰 파고를 갖는 붕괴파와 권파를 조파시켰다. 쇄파점에 가까워 질수록 붕괴파와 권파의 파형경사가 뚜렷하게 증가되었고 쇄파 후에는 감소되었다. 격렬한 권파시에는 파형경각가 보다 더 증가됨을 볼 수 있었다. 파군 중의 기본적인 주파수들은 파낭의 전파과정이나, 특히 격렬한 권파시에도 별 변동이 없었다.

• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 2002년도 한국해안해양공학발표논문집 Proceedings of Coastal and Ocean Engineering in Korea
• /
• pp.14-23
• /
• 2002

Wave breaking and breaking wave-induced hydrodynamics are very important subjects in the field of coastal and ocean hydrodynamics and engineering. In the coastal zone, a submerged breakwater has been increasingly popular, since it is one of nature-matching structures with multi- functions such as (1) wave energy dissipation by wave breaking and friction, (2) oxygen supply to sea by wave breaking and breaking wave, (3) water purification by entrained air bubbles, (4) keeping. good seascape. and (5) good habitat for sea livings. Recently, the breaking wave-induced high frequency pressure over a submerged breakwater is said to have a function of gathering sea livings around the structure, which has encouraged the construction of the submerged breakwater in coastal zone. (omitted)

• 한국해양환경ㆍ에너지학회지
• /
• 제5권1호
• /
• pp.11-18
• /
• 2002

방향 및 주파수 성분을 포함하는 파랑집중에 의해 다방향 쇄파를 생성하였으며, 등기울기 및 등진폭 스펙트럼 모델을 적용하였다. 생성된 다방향 쇄파는 초기쇄파, 단일쇄파 다중쇄파로 구분된다. 다방향 쇄파의 특성을 파정 기울기 및 비대칭성으로 정의되는 파형인자들의 함수로 고찰하였다. 또한 파랑집중의 효율성 관점에서 쇄파 파랑특성의 전개를 분석하였다. 파정 전면 기울기 및 연직 비대칭성은 쇄파과정에 영향을 미치는 중요한 인자이나, 파정후면 기울기 및 수평 비대칭성은 쇄파 과정에서 거의 상수 값을 갖는다. 방향 성분의 중첩은 파랑집중의 효율성을 크게 강화하며, 이는 다방향파의 쇄파 특성이 일방향파의 쇄파 특성과 상이함을 나타낸다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.45-51
• /
• 1999

In this study to assess chip breaking characteristics of cold-drawn free machining steels a newly developed non-dimensional parameter chip breaking index CB has been adopted. And for comparison with free machining steels chip breaking characteristics of conventional carbon steels were investigated. Properly controlled chips were produced with the CB value of 0.05-0.2 regardless of steel types. In case of cold-drawn free machining steels however cycle times of chip breaking are relatively shorter than those of conventional steels. And properly controlled chips were obtained from wider range of feed rate.