• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.107-115
• /
• 2015

The objective of the this study is to find the breakage index and changes in permeability of Bottom ash from thermoelectric power plants in Korea. Bottom ash was crushed by compaction according to compaction energy from 0 to $1661.4\;kN/m^2$. The particle size distribution was estimated by sieve analysis. The various breakage indexes were used for analyzing the change in particle size distribution and effect of compaction energy. In the result, breakage indexes were increased as compaction energy and initial upper 4.75 mm diameter ratio, but values and tendencies of breakage indexes appeared in different as calculation method of breakage indexes. The coefficient of permeability was decreased with particle breakage, but decreasing ratio of permeability was very small. Bottom ash has a higher permeability than the weathered soil and it is considered high usability as a permeable materials.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.36-43
• /
• 1997

In order to make unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for tool wear and breakage during turning operation. Developing economic sensing and identification methods for turning processes, sound pressure measurement and digital signal processing technique are proposed. The validity of the proposed system is confirmed through the large number of cutting tests.

• Geomechanics and Engineering
• /
• 제25권2호
• /
• pp.159-170
• /
• 2021

Particle size of tailings in different areas of dams varies due to sedimentation and separation. Saturated hydraulic conductivity of high-stacked talings materials are seriously affected by void ratio and particle breakage. Conjoined consolidation permeability tests were carried out using a self-developed high-stress permeability and consolidation apparatus. The hydraulic conductivity decreases nonlinearly with the increase of consolidation pressure. The seepage pattern of coarse-particle tailings is channel flow, and the seepage pattern of fine-particle tailings is scattered flow. The change rate of hydraulic conductivity of tailings with different particle sizes under high consolidation pressure tends to be identical. A hydraulic conductivity hysteresis is found in coarse-particle tailings. The hydraulic conductivity hysteresis is more obvious when the water head is lower. A new hydraulic conductivity-void ratio equation was derived by introducing the concept of effective void ratio and breakage index. The equation integrated the hydraulic conductivity equation with different particle sizes over a wide range of consolidation pressures.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.221-221
• /
• 2022

Chromosome breakage occurred by DNA methylation inhibitor. Zebularine is known as DNA methylation inhibitor and suitable for water solubility among different DNA methylation inhibitors as 5-Azacytidine and 5-aza-2'-deoxycytidine. We used zebularine as mutagen according to different methods by roots absorption and seed imbibition. After zebularine treatment, DNA methylation inhibitor, we observed mitotic chromosome behavior what is different according to two different treatment methods. First, seed imbibition treatment in 1,000 μM of zebularine solution for 72 hours in dark conditions. The second treatment to seedlings of Keumkang was also treated in 1,000 μM of zebularine solution for 72 hours after germination. Root and shoot showed different elongations in each treatment. Root absorption treatment(3.01±0.48, 2.00±0.26) showed the shortest elongation in root and shoot than control(8.16±0.61, 4.03±0.48) and seed imbibition treatment(4.33±0.80, 2.48±0.36). It can be explained root tip meristematic cell activity was damaged by DNA methylation inhibitor. Primary root tips were collected in DW for 24 hours at low temperature(0℃) and fixed in fixation solution for 3 days to chromosome observation in mitosis. Mitotic index, chromosome structure and chromosome aberration were observed by phase-contrast microscope. Mitotic index of the control(0.29) showed twice mitotic cells as the treated groups(imbibition 0.15, absorption 0.14). Observation of chromosomes showed some short chromosomes and loosen chromosomes affected by zebularine. It is considered because of zebularine damage DNA in mitosis. We observed "gap by chromosome breakage" in chromosomes that have loose parts between centromere and telomere. It seems demethylation of zebularine occurs chromosome breakage.

• 자원리싸이클링
• /
• 제19권3호
• /
• pp.52-61
• /
• 2010

1990년대 후반 이후 국내 건설폐기물의 발생량은 급격하게 증가하였으며, 이를 처리하기 위해 많은 노력을 기울인 결과 97%이상 재활용이 이루어지고 있다. 이 과정에서 폐콘크리트는 단순 파쇄를 통해 순환골재로 생산되고 있으며, 대부분 뒤채움재나 매움재 등 저급한 용도로 재활용되고 있는 실정이다. 그 이유는 골재와 모르타르의 단체분리가 원활히 이루어지지 않아 천연골재 대비 낮은 품질의 순환골재가 생산되기 때문이다. 이에 본 연구에서는 기존 순환골재 생산 공정의 문제점을 파악하기 위하여 기존 공정에서 대표적으로 사용되고 있는 파분쇄 장비를 이용한 폐콘크리트 파분쇄 실험을 통해 골재와 모르타르의 단체분리 특성을 분석하였다. 이 과정에서 골재와 모르타르의 단체분리 효율을 향상시키기 위하여 가열 전처리 방법을 도입하였으며, 우수한 단체분리 특성을 확인하였다. 파분쇄 실험 결과 기존 파분쇄 장비를 통해 생산된 순환골재는 골재와 모르타르의 계면을 따라 선택적인 파분쇄가 발생하지 않아 그 품질이 저하되었으며, 나아가 골재 자체가 충격을 받아 파괴가 일어나는 문제가 존재하였다. 이를 해결하기 위하여 골재와 모르타르의 계면에서의 선택적인 파분쇄를 유도시키는 새로운 분쇄 메커니즘인 gentle breakage를 도입하였으며, 이를 위한 기초 실험으로 폐콘크리트를 자유낙하시켜 순환골재를 생산한 결과 기존 파분쇄 장비에 비해 우수한 단체분리 특성을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제26권3호
• /
• pp.315-341
• /
• 2007

A sudden change of stiffness in a structure, associated with the events such as weld fracture and brace breakage, will cause a discontinuity in acceleration response time histories recorded in the vicinity of damage location at damage time instant. A new damage index is proposed and implemented in this paper to detect the damage time instant, location, and severity of a structure due to a sudden change of structural stiffness. The proposed damage index is suitable for online structural health monitoring applications. It can also be used in conjunction with the empirical mode decomposition (EMD) for damage detection without using the intermittency check. Numerical simulation using a five-story shear building under different types of excitation is executed to assess the effectiveness and reliability of the proposed damage index and damage detection approach for the building at different damage levels. The sensitivity of the damage index to the intensity and frequency range of measurement noise is also examined. The results from this study demonstrate that the damage index and damage detection approach proposed can accurately identify the damage time instant and location in the building due to a sudden loss of stiffness if measurement noise is below a certain level. The relation between the damage severity and the proposed damage index is linear. The wavelet-transform (WT) and the EMD with intermittency check are also applied to the same building for the comparison of detection efficiency between the proposed approach, the WT and the EMD.

• 폴리머
• /
• 제28권6호
• /
• pp.545-550
• /
• 2004

광조사에 의하여 발색단 분해를 유도함으로써 고분자의 굴절률을 변화시켜 공중합체 박막의 굴절률을 조절하고, FTIR과 UV/Vis 분광 실험으로 굴절률에 영향을 미치는 구조의 변화를 조사하였다. 광표백에 따라 공중합체 박막의 굴절률이 작아지는 것은 광반응에 의하여 발색단 내 C=C 이중결합이 끊어져 고분자의 편극률이 작아지기 때문이다. 입사되는 빛의 전기장 방향에 의존하는 선택적인 광반응에 의하여 필름 면에 평행한 방향으로 존재하는 발색단이 먼저 분해가 되면서 고분자 필름 면에 평행한 방향의 굴절률이 수직한 방향에서 보다 더 급격하게 감소하였다. 이와 같은 고분자 박막 내의 굴절률 차이를 편광 ATR-FTIR 실험에서 얻어지는 고분자 특성 피크의 변화를 조사하여 증명하였다.

• 한국작물학회지
• /
• 제66권4호
• /
• pp.318-325
• /
• 2021

이 연구에서는 인공 염색체 절단의 유발원인 제부라린을 두 종류의 Leymus 염색체가 첨가된 이중 일가 외래 염색체 첨가 밀 계통의 생식세포 분열기에 처리함으로써 인공 염색체 절단이 상동성이 결여된 외래 염색체 사이의 염색체 조합에 미치는 영향을 확인하고자 수행하였다. 밀의 유전적 배경에서 두 외래 염색체의 행동은 genomic in situ hybridization을 이용하여 확인하였다. 결과적으로 생식세포분열 전기 초반에 인공 염색체 절단은 두 외래 염색체의 핵형 차이인 말단의 이질염색질을 제외한 전장에서 발생하였으며, 그로 인하여 염색체 융합이 이루어져 이가 외래 염색체의 형태가 형성되는 것을 확인하였다. 이처럼 제부라린 처리에 의한 인공 염색체 절단이 체세포분열(mitosis) 염색체뿐만 아니라 생식세포분열 염색체에 염색체 접합과 유사한 현상을 유발시키는 것을 확인하였으며, 이를 통하여 상동성을 엄격하게 조절하는 Ph1 유전자를 가지고 있는 밀의 유전적 배경에서 동조 또는 비상동 관계에 있는 염색체 사이에서 염색체 결합이 이룰 수 있는 것을 확인하였다. 반면, 인공 염색체 절단은 두 외래 염색체의 소실과 일반적인 이가 염색체의 형태가 아닌 비정상적인 형태의 외래 이가 염색체도 유발하는 것을 확인하였다. 이러한 현상은 보통 형태와 유사한 이가 외래 염색체가 형성되었음에도 불구하고 생식세포 분열의 사분자의 포자에 자매염색분체의 분포 비율에 부정적인 영향을 미침으로써 염색체 조합의 빈도를 나타내는 상동성 지수에 유의미한 차이를 나타내지 못했다. 따라서 인공 염색체 절단에 의한 염색체 결합의 빈도와 발생부위에 대한 조절을 작물학적 관점에서 이용하려면 앞으로 지속적인 염색체 연구를 바탕으로 좀 더 구체적이고 세밀한 제부라린의 투여량, 처리시간 및 처리방법에 대한 연구가 필요할 것으로 생각한다.

• Journal of Plant Biology
• /
• 제38권4호
• /
• pp.321-328
• /
• 1995

Calli obtained from basal disc explants of Allium victorialis var.platyphyllum wre grown in three kinds of nutrient media (MS, BDS, and B5), and the frequencies of mitotic index and the chromosomal aberrations were analysed. The mitotic index varied from 0.55% to 1.01% with respect to culture media and ages. The mitotic irregularities like micro-, bi- and multi-nuclei, chromosome bridge and laggards were noted in each types of calli. The chromosome number variations observed in metaphase stage were identified aneuploid and tetraploid. Structural variations such as dicentric chromosomes, centromere breakage and small chromosomes were observed. Relationship between basal medium and chromosomal variability was not observed in this study. But, in BDS medium, NAA and BA had a more effect on number variation than kinetin.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.1045-1055
• /
• 2017

Tensile strength is considered key properties for characterizing rock material in engineering project. It is determined by direct and indirect methods. Point load test is a useful testing method to estimate the tensile strengths of rocks. In this paper, the effects of rock shape on the point load index of gypsum are investigated by PFC2D simulation. For PFC simulating, initially calibration of PFC was performed with respect to the Brazilian experimental data to ensure the conformity of the simulated numerical models response. In second step, nineteen models with different shape were prepared and tested under point load test. According to the obtained results, as the size of the models increases, the point load strength index increases. It is also found that the shape of particles has no major effect on its tensile strength. Our findings show that the dominant failure pattern for numerical models is breaking the model into two pieces. Also a criterion was rendered numerically for determination of tensile strength of gypsum. The proposed criteria were cross checked with the results of experimental point load test.