• The Korean Journal of Pain
• /
• 제23권1호
• /
• pp.78-81
• /
• 2010

Spinal cord stimulation (SCS) has become an established clinical option for treatment of refractory chronic pain. Current hardware and implantation techniques for SCS are already highly developed and continuously improving; however, equipment failures over the course of long-term treatment are still encountered in a relatively high proportion of the cases treated with it. Percutaneous SCS leads seem to be particularly prone to dislocation and insulation failures. We describe our experience of lead breakage in the inserted spinal cord stimulator to a complex regional pain syndrome patient who obtained satisfactory pain relief after the revision of SCS.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.95-103
• /
• 1993

In the manufacturing field, some traditional manufacturing and machining methods become weakened the productivity, the external competitive power, and accuracies of the products. In these point of view, the unmanned and intelligent manufacturing systems are proposed by some manufacturing companies. The real-time monitoring technology of the cutting tool conditions i.e. tool wear, tool breakage, crack, and chipping anre necessarily reauired to realize those system, especially. In this study, we constructed the multi- sensing system using the acceleration sensor, the current sensor, and the loadmeter of a machine tool. Also, we analyzed the nose breakage, the massive signal, and some monitoring features by means of the developed system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1201-1202
• /
• 2008

This paper describes what causes the breakage of the toughened glass stem insulators. Several plausible hypotheses were proposed by surveying the field, hearing evidence, analyzing the broken specimens, etc. The hypotheses were classified into a couple of patterns and the hypotheses were selected and listed in order of the possibility. As a result, the most convincing cause of the breakage was the resonance of the vibrations incoming from the H-frame side and the feeder side. In addition, the collision of ballasts and the impurities in the toughened glass could be also the causes.

• 한국안전학회지
• /
• 제6권4호
• /
• pp.21-27
• /
• 1991

Acoustic Emission was monitored during tensile test and loading-holding-unloa-ding cycle test for two types (notched and unnotched) of CFRP specimens. AE activities showed that the fiber breakage during tensile tests depended upon the specimen geometry. We obtained new AE parameter such as the ration (damage ratio= AE events during unloading test / AE events during loading test) and the felicity ratio from which we investigated dynamic fracture process of CFRP specimens. The damage ratio of AE events was shown to be a good indicator to distinguish the generated fracture mechanism, such as fiber breakage and delamination. Also, ultrasonic testing results after loading-holding-unloading cycle test were good agreement with AE test results to detect defects or fiber breakage.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.451-456
• /
• 1995

This study investigates the feasibility of the real time detection of tool breadage in face milling operation. The proposed methodology using an ART2 neural network overcomes a cumbersome task in terms of the learning or determining a threshold value. The features taken in the researchare the AR parameters modelled from a RLS, and those are proven to be good features for tool breakage from experiments. From the results of the off line application, we can conclude that an ART2 neural network can be well applied to the clustering of tool states in real time regardless of the unsupervised learning.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.9-10
• /
• 2007

In this paper, we investigated the effect of solar cell breakage on maximum output power of PV module. The test result using artificial light source didn't give any change in output power in case of crack near electrical ribbon. Also, there was a reduction in output power in case of increasing of crack area far from electrical ribbon. But, this experiment is under artificial light source test method. So, when such a PV module is outdoor for a long time, there would be problems on electrical output power and durability because of thermal aging phenomenon of solar cell breakage.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.130-143
• /
• 1995

This paper presents a new methodology for on-line tool breadage detection by sensor fusion of an acoustic emission (AE) sensor and a built-in force sensor. A built-in piezoelectric force sensor, instead of a tool dynamometer, was used to measure the cutting force without altering the machine tool dynamics. The sensor was inserted in the tool turret housing of an NC lathe. FEM analysis was carried out to locate the most sensitive position for the sensor. A burst of AE signal was used as a triggering signal to inspect the cutting force. A sighificant drop of cutting force was utilized to detect tool breakage. The algorithm was implemented on a DSP board for in-process tool breakage detection. Experiental works showed an excellent monitoring capability of the proposed tool breakage detection system.

• 한국생산제조학회지
• /
• 제6권3호
• /
• pp.36-43
• /
• 1997

In order to make unmanned machining systems with satisfactory performances, it is necessary to incorporate appropriate condition monitoring systems in the machining workstations to provide the required intelligence of the expert. This paper deals with condition monitoring for tool wear and breakage during turning operation. Developing economic sensing and identification methods for turning processes, sound pressure measurement and digital signal processing technique are proposed. The validity of the proposed system is confirmed through the large number of cutting tests.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.9-14
• /
• 1994

The modern CNC machine require increasingly an exact monitoring and control of cutting process. They are to make final taret which construct full automation factories as unmanned system. In this study, we decided that we develop new techique to monitor and detect tool breakage on the machining operation using face milling machine with multi-point throwaway tips. The technology in which the tool is illuminated by an beam of Laser is used by image of tool fracture through CCD camera.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.172-175
• /
• 2006

Owing to the strike of lighting a breakage of insulator would happen. This breakage may give rise to many problems such as increment of reclosing failure, a drop for reliance and a hardship of maintenance and repair. To solve those problems, this study develop a protected equipment for insulator which is suitable to 22.9kV distribution line towers and is purposed to investigation for a proper adaption, protection efficiency of insulator and effect of adaption.