• 폴리머
• /
• 제25권6호
• /
• pp.833-839
• /
• 2001

광산란 장치를 이용하여 메탈로센 촉매 하에 제조된 메탈로센 선형 저밀도 폴리에틸렌의 결정화거동을 Ziegler-Natta 촉매에 의하여 제조된 선형 저밀도 폴리에틸렌과 비교하여 보았다. 특히 branching수와 길이 그리고 공단량체의 함량이 결정화 거동에 미치는 영향을 중점적으로 살펴보았다. 같은 수의 branching 수를 가지고 있는 메탈로센 선형 저밀도 폴리에틸렌은 기존의 선형 저밀도 폴리에틸렌에 비하여 결정화를 시작하기 위한 induction time이 길어짐을 알 수 있으나 구정의 성장속도는 두 경우가 유사함을 확인하였다. 메탈로센 선형 저밀도 폴리에틸렌의 branching 수를 감소시킬 경우 induction time과 구정성장속도가 모두 빨라짐을 알 수 있었다. 또한 일반적으로 최대 구정의 크기는 branching 수에 관계없이 메탈로센 선형 저밀도 폴리에틸렌이 기존의 선형 저밀도 폴리에틸렌에 비하여 커짐을 알 수 있었다.

• 대한수의학회지
• /
• 제47권1호
• /
• pp.7-17
• /
• 2007

The left main descending artery (LMDA) of left coronary artery (LCA) in rats runs around the left side of conus arteriosus after arising from the aortic sinus and descends to the apex of heart with branching several branches into the wall of left ventricle (LV). The ligation site of LMDA for myocardial infarction (MI) is the 2~4 mm from LCA origin, between the pulmonary trunk and left auricle. The characteristics that rat heart has no interventricular groove on the surface and its coronary arteries run intramyocardially with branching several branches give the difficulty in surgery for MI which resulted in expected size. This study was aimed to elucidate the branching patterns of the left coronary artery for analysis of MI size and for giving the basic data to producing small MI intentionally in 2 male species that are widely used, Sprague-Dowley (SD) and Wistar-Kyoto (WKY), in the world. Red latex casting was followed by the microdissection in 27 and 28 hearts of SD and WKY male rats, respectively. The branching patterns of LMDA were classified into 3 major types and others based on the left ventricular branches (L). The Type I, Type II, Type III and others are shown in 55.6%, 22.2%, 14.8%, and 7.4% in SD, 60.7%, 10.7%, 7.1%, and 21.5% in WKY, respectively. The branching number of the first left ventricular branch (L1) that are distribute the upper one third of LV was 1.2~1.5, and its branching sites were ranging 0.9~2.1 ᒠfrom LCA origin. L2, the second left ventricular branch distributing middle one third of LV, was the number of 1.2~1.4 and branching out ranging 5.1~5.7 mm. L3, the third left ventricular branch of LMDA distributing lower one third of LV, was the number of 1~1.5 and branching out ranging 7.0~9.3 mm from LCA origin. The common branch of L1 and L2 was branched from LMDA with the number of 1.1, and its site was located in the distance of mean of 1.5 mm and 2.8 mm in SD and WKY, respectively. The common branch of L2 and L3 was branched from LMDA with the number of 1, and its site was located in the distance of mean of 7.2 mm and 2.9 mm in SD and WKY, respectively. The right ventricular branches (R) of LMDA were short and branched in irregularly compared with L. The number of 1~4 of R were branched from LMDA. With regarding to the distribution area of L and the ligation site for MI, moderate MI (25~35% of LV) might be resulted in 70.4% and 60.7% in SD and WKY rats. Small MI might be produced intentionally if the ligation would be located at the 4~6 mm from LCA origin in the left side of LMDA. These data wold be helpful to expect the size of MI and to reproduce of small MI, intentionally, in rat hearts.

• Journal of applied mathematics & informatics
• /
• 제14권1_2호
• /
• pp.157-172
• /
• 2004

An age-dependent branching process where disasters occur as a renewal process leading to annihilation or survival of all the cells, is considered. For such a process, the total mean sojourn time of all the cells in the system is analysed using the regeneration point technique. The mean number of cells which die in time t and its asymptotic behaviour are discussed. When the disasters arrival as a Poisson process and the lifetime of the cells follows exponential distribution, elegant inter- relationships are found among the means of (i) the total number of cells which die in time t (ii) the total sojourn time of all cells in the system upto time t and (iii) the number of living cells at time t. Some of the existing results are deduced as special cases for related processes.

• 한국약용작물학회지
• /
• 제2권2호
• /
• pp.140-145
• /
• 1994

형질이 고정되지 않은 도입 삼도시호의 유용초형을 선발하고자 다변량 해석법에 의해 개체간의 유전적 거리를 추정하고 이를 ‘기초로 Cluster analysis로 초형군을 분류를 하였던바 그 결과를 요약하면 다음과 같다. 1. 시호의 지상부 및 지하부 8개 형질을 대상으로 Complete linkage cluster 방법 에 의해 초형을 분류한 결과 6개 군(群)으로 분류할 수 있었다. 최초 분지 착생절위가 낮은 개체는 분지수가 많아 다분지형으로 최초분지 착생절위가 높은 개체는 분지수가 적어 소분지형 초형으로 구분되었다. 2. 초형 II군(群)과 VI군(群)은 다분지형으로 그리고 I군(群), III군(群), IV군(群) 및 V군(群)은 소분지형으로 분류되었다. 3. 시호의 건근중은 분지수와 고도(高度)로 유의(有意)한 정상관(正相關)을 보였으며, 최초분지 착생결위와는 유의힌 부(負)의 상관(相關)을 나타내었다.

• 한국작물학회지
• /
• 제29권4호
• /
• pp.376-385
• /
• 1984

참깨의 개화, 착삭습성을 조사하여 참깨 다수종품 종육성 및 재배법 개선을 위한 기초자료로 이용코자 8개의 초형을 공시하여 조사한 결과 다음과 같은 몇가지 결론을 얻었다. 1. NMB(단경형, 1과성2실4방)형에서는 총37화중 평균 81％의 착삭률을 나타내었으며 NMQ(단경형 1과성4실8방)형에서는 66화중 평균 70％의 착삭률을 보였다. 2. 착삭부위별 착삭률은 NMB형에서는 착화하위부 94％, 중위부 89％, 상위부 63％의 착삭률을 나타낸데 대해서 NMQ형에서는 하위부 77％, 중위부 82％, 상위부에서 불과 50％의 착삭률만을 보여 차이가 컸다. 3. NTB(단경형, 3과성 2실4방)형에서는 109화중 84화에서 삭이 형성되어 평균 77％의 착삭률을 나타냈으며 NTQ(단경형, 3과성4실8방) 형에서는 75화중 53화에서 삭이 형성되어 70％의 착삭률을 보였다. 4. 착화부위별 착삭률은 NTB형에서 착화하위부 89％, 중위부 87 ％, 상위부 44％의 착삭률의 보인데 대해서 NTQ형에서는 하위부 76％, 중위부 78％ 상위부 45％의 착삭률을 보여 단경형 4실8방에서만은 착삭률에서 중위부 ＞ 하위부 ＞ 상위부의 특별한 습성을 보였다. 5. BMB (분지형 1과성2실4방)형에서는 110화중 83％의 높은 착삭률을 나타냈으며 BMQ(분지형 1과성 4실8방)형에서는 88화중 67％의 낮은 착삭률을 보였다. 6. BMB형의 주경에서는 88％, 분지에서는 80％의 양호한 착삭률을 보였으며 BMQ형에서는 주경 81％, 분지 53％로서 분지착삭률이 낮았다. 7. BTB (분지형 3과성 2실4방)형에서는 200화중 62％의 저조한 착삿률을 보였으나 화수와 착삭수는 전공시초형 중 가장 많았으며 BTQ형에서는 113화중 62％의 낮은 착삭률을 보였다. 8. BTB형의 주경착삭률은 70％, 분지착삭률은 58％를 나타냈으며, BTQ형의 주경착삭률은 66％ 분지착삭률은 42%를 나타내어 착삭률이 모든 초형중에서 가장 낮았다. 9. 분지형에서는 주경착삭률 평균 73％ 분지착삭률 평균 61％이며 주경에서는 하위부 85％, 중위부 72％, 상위부 57％인데 대해서 분지에서는 하위부가 74％, 상위부가 48％의 착삭률을 보였다. 10. 착삭수와 착삭률등 착삭습성을 좌우하는 것은 삭실의 형태(실방수)가 가장 크게 영향을 미치는 것으로 판단되었다. 11. 참깨의 다수성 품종육종 방향은 분지성에 3과성인 2실4방형 (BTB형) 초형특성을 구비한 계통을 선발하는데 있다.

• 환경위생공학
• /
• 제5권2호
• /
• pp.100-104
• /
• 1990

The geometrical branching pattern was studied through the time by a few parameters: the branching lengths, angles and number of branches. Ratios of moving amounts of nutrients between branches was decreased more in a terminal branch than in a proximal one. As the time increased, the more branches and leaves were also increased, while the influx of sunlight was decreased in the lower portion of inner crown which increased the mortality rate of branches.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.49-51
• /
• 2003

This test data informs to compare components from different manufactured coupler type. On the point of reliability, less than 1x8 output branching number, fuse type coupler was more stable than PLC type coupler. But more than 1x8 output branching number, PLC type coupler was more stable. This test data showed critical branching point, on the point of reliability.

• Anatomy and Cell Biology
• /
• 제57권3호
• /
• pp.346-352
• /
• 2024

Studies reveal variations in the in the origin, number, and branching patterns of the lateral circumflex femoral artery (LCFA). The present study aimed to document such variations and their potential clinical applicability. Thirty-two femoral triangles of 16 embalmed adult human cadavers were dissected to investigate the variation in the origin, number, and branching patterns of LCFA. The main branches of the LCFA were tracked independently for numerical variations in branching pattern. The distance between the origin of LCFA and mid inguinal point (MIP) was also measured in each case. LCFA was most commonly arising from profunda femoris (PF), followed by femoral artery (FA) and common trunk of the femoral artery (CFA). Duplication LCFA was observed in 15 (46.87%) limbs, in 5 (31.25%) cases duplication was only on right side, in 4 (25%) cases duplication was only on left side and in 3 (18.75%), duplication was bilateral. Cases with duplication of LCFA, showed numerical variations with descending pattern being the most common. The average distance of LCFA1 and LCFA2 from mid-inguinal point was 5.77±1.35 cm and 6.14±2.05 cm respectively. Detailed information regarding the occurrence of duplication will be great importance for surgeons, interventional radiologists, and other medical professionals performing procedures in the femoral region. Knowledge of variation of branching pattern of LCFA is utmost important as surgeons use the descending branch of the LCFA in bypass grafting and vascular reconstruction surgeries.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.325-335
• /
• 2004

Molecular weight distributions of poly(vinyl neo-decanoate) produced by the bulk polymerization of the monomer to low conversions were investigated to obtain values of the rate constants for the chain transfer to monomer ( $C_{M}$). The value of $C_{M}$ of 7.5($\pm$0.6)${\times}$10$^{-4}$ was obtained from a logarithmic plot of the number distribution at 5,25, and 5$0^{\circ}C$, which suggests that the activation energy for chain transfer is on the order of 20-25 kJ ㏖$^{-1}$ . These plots were linear between the number and weight-average degrees of polymerization, but not over the whole molecular weight range for which a significant signal was observed in the gel permeation chromatography (GPC) trace. Modeling suggests that the deviations observed at high molecular weights can be explained by branching of the chains through chain transfer to the polymer, with a branching density as low as 10$^{-5}$ , without affecting the slope at low values of the number of monomer unit, N. This deviation from the expected distribution of linear chains was used to estimate the branching densities at low conversion.ion.

• 산업경영시스템학회지
• /
• 제19권39호
• /
• pp.9-18
• /
• 1996

Many algorithms have been developed for optimizing the asymmectric traveling salesman problem known as a representative NP-Complete problem. The most efficient ones of them are branch and bound algorithms based on the subtour elimination approach. To increase efficiency of the branch and bound algorithm. number of decision nodes should be decreased. For this the minimum bound that is more close at the optimal solution should be found or an effective bounding strategy should be used. If the optimal solution has been known, we may apply it usefully to branching. Because a good feasible solution should be found as soon as possible and have similar features of the optimal solution. By the way, the upper bound solution in branch and bound algorithm is most close at the optimal solution. Therefore, the upper bound solution can be used instead of the optimal solution and information of which can be applied to new branching criteria. As mentioned above, this paper will propose an effective branching rule using the information of the upper bound solution in the branch and bound algorithm. And superiority of the new branching rule will be shown by comparing with Bellmore-Malone's one and carpaneto-Toth's one that were already proposed.