• 자동차안전학회지
• /
• 제5권2호
• /
• pp.11-16
• /
• 2013

This paper presents a unified control algorithm of independent braking and steering for collision avoidance. The desired motion of the vehicle in the yaw plane is determined using the probabilistic risk assessment method based on target state estimation. For the purpose of coordinating the independent braking and steering, a non-linear vehicle model has been developed, which describes the vehicle dynamics in the yaw plane in both linear and extended non-linear ranges of handling. A control allocation algorithm determines the control inputs that minimize the difference between the desired and actual vehicle motions, while satisfying all actuator constraints. The performance of the proposed control algorithm has been investigated via computer simulations conducted using the vehicle dynamics software CARSIM and Matlab/Simulink.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.23-29
• /
• 1993

In this study, the method of deciding simulation test conditions is developed by computer program compared to actual vehicle test as accurately as possible. These results of analytical test conditions are conformed by simulation test using the brake dynamometer by comparison with test results of actual vehicle. Results of simulation test by these analytical results show good agreement with the vehicle test results. The analytical simulation test conditions provide the input data to brake dynamometer which follows : - each test inertia corresponding to braking deceleration - test condition of input control : brake line pressure - test condition of output control : braking torque

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.887-895
• /
• 2018

본 논문은 수송량 증대를 위한 열차제어시스템의 안전거리 설계와 전동차 제동설계에 활용할 수 있는 제동모델을 제시한다. 제동모델을 위해 6량 1편성으로 운행되는 전동차의 제동특성을 시험하였다. 제동특성에 영향을 줄 수 있는 인자로는 마찰계수, 제동압력의 변화, 회생제동 등이 있으며 시험을 통해 확인하였다. 제동압력은 상용제동과 비상제동으로 구분하고 차량의 특성을 반영하였다. 주행하는 철도차량에 작용하는 외력은 주행저항을 측정 시험과 후처리 방법을 제시하고 있는 KS R 9217에 따라 시험을 수행하고 2차 다항식 형태로 해당 열차의 주행저항을 제시하였다. 차량의 재원, 마찰계수, 제동압력, 주행저항을 바탕으로 직선 평탄 선로를 주행하는 전동차의 동적 거동은 다물체 동역학 해석 소프트웨어를 이용하여 해석하였다. 해석결과는 상용제동과 비상제동에 대하여 시험결과와 비교 검증하였으며 상당히 합리적인 결과를 도출하였다. 검증된 모델은 제동초기 속도에 따른 정지거리를 분석하고 감속도 중심의 제동모델과 비교하였다. 또한, 운영기관의 마찰계수 한계치에 따라 열차제어시스템을 위한 안전거리는 변화할 수 있음을 확인하였다. 본 연구의 결과는 철도차량들을 연결하여 운행하는 열차의 동적 거동해석에 활용할 수 있을 뿐 아니라 차량 설계에서 제동에 영향을 미치는 다양한 선로환경 분석과 제동 성능향상의 기초자료로 활용할 수 있을 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.377-382
• /
• 2003

In tread braking of freight cars, braking force is produced by the friction between the wheel and the braking shoe. Friction coefficients such as the brake power, weight variation and brake shoe types should be sensitively treated as the design parameters. The conditions of the car, empty and weighted, should also be taken into consideration in brake force design and the control of brake force has some limitations in terms of the brake system design so that the brake materials selection should be considered as important measures to solve that difficulties. Friction characteristics of brake materials should remain within the range of maximum and minimum value and the friction performance should remain stable regardless of braking time and temperature. This study presented an experimental evaluation method to secure optimum braking performance by keeping safe braking effect and braking distance by the friction coefficient of the brake shoe of the freight cars.

• International Journal of Automotive Technology
• /
• 제3권4호
• /
• pp.165-170
• /
• 2002

For a vehicle Anti-lock Braking System (ABS), the control target is to maintain friction coefficients within maximum range to ensure minimum stopping distance and vehicle stability. But in order to achieve a directionally stable maneuver, tire side forces must be considered along with the braking friction. Focusing on combined braking and turning operation conditions, this paper presents a new control scheme for an ABS controller design, which calculates optimal target wheel slip ratio on-line based on vehicle dynamic states and prevailing road condition. A fuzzy logic approach is applied to maintain the optimal target slip ratio so that the best compromise between braking deceleration, stopping distance and direction stability performances can be obtained for the vehicle. The scheme is implemented using an 8-DOF nonlinear vehicle model and simulation tests were carried out in different conditions. The simulation results show that the proposed scheme is robust and effective. Compared with a fixed-slip ratio scheme, the stopping distance can be decreased with satisfactory directional control performance meanwhile.

• 자동차안전학회지
• /
• 제12권2호
• /
• pp.7-13
• /
• 2020

Recently, there is a big issue of downsizing on brake system according to fuel efficiency and regenerative braking cooperation control. Especially, small cars have improved in a variety ways such as electric vehicle and smart car compared to previous small cars. So, small brake system is strongly required in the car industry. A new small brake system for light compact vehicles was proposed in this paper. For this system, the solid type disc and caliper were newly developed. And the important design factors were considered to reduce brake size. First, we calculated the temperature rise of disc through heat capacity formula and CAE analysis. Second, we analyzed the housing and carrier stiffness of caliper to select the reasonable condition. Finally, the superiorities of the developed brake system were verified by heat capacity, consumption liquid level, braking feeling, judder, wear test and regenerative braking cooperation control analysis. A developed brake system is expected to be useful for brake system of light compact platform.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권11호
• /
• pp.611-616
• /
• 1999

The introduction of the eddy current braking(ECB) system in HSRT(high speed railway train) is known to be advantageous, in that the system is independent on wheel-rail adhesion coefficient which is greatly affected by weather condition. It also minimize the maintenance of the brake system and does not require any additional electric energy because it is powered form the regenerated power at the time of the braking. In this study, the braking and attraction forces of the ECB are simulated by 2-D FEM and are experimentally verified on a down-scaled prototype. A control algorithm of the ECB is proposed to generate constant braking torque using linear variation of the reference current according to speed. Experimental results shows that the constant torque is generated over all operating speed region by developed control algorithm.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.56-61
• /
• 2013

This paper presents a development of the Advanced Emergency Braking (AEB) Algorithm for passenger vehicles. The AEB is the system to slow the vehicle and mitigate the severity of an impact when a rear end collision probability is increased. To mitigate a rear end collision, the AEB comprises of a millimeter wave radar sensor, CCD camera and vehicle parameters of which are processed to judge the likelihood of a collision occurring. The main controller of the AEB algorithm is composed of the two control stage: upper and lower level controller. By using the collected obstacle information, the upper level controller of the main controller decides the control mode based not only on parametric division, but also on physical collision capability. The lower level controller determines warning level and braking level to maintain the longitudinal safety. To decide the braking level, Last Ponit To Brake and Steer (LPTB/LPTS) are compared with current driving statues. To demonstrate the control performance of the proposed AEBS algorithm's, closed-loop simulation of the AEBS was conducted by using the Matlab simlink and CarSim software.

• 한국항행학회논문지
• /
• 제24권4호
• /
• pp.280-284
• /
• 2020

현재 공기제동의 문제점을 보완하기 위한 유지보수와 환경문제, 효율성, 경제성 등을 개선하기 위하여 정지에서 고속영역까지의 전 영역에서 전기 브레이크의 모든 주행 범위와 관련된 제동력을 제시하였다. 결과적으로 는 제동력의 효율과 첨단 기술은 에너지 활용을 확장 시켰으며, 본 논문을 통하여 모든 주행 범위에서의 소음이 저감되며, 유지 보수 비용의 절감 효과가 있었다. 트랙션 모터는 인버터의 최대 전압을 제어하는 고속 운전 특성 구동을 위해 트랙션 모터의 가변 속도와 트랙션 모터의 단자 전압을 가져 와야 한다. 따라서 시뮬레이션을 통한 구동 및 브레이크 변경에 대해 연구하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제9권4호
• /
• pp.8-13
• /
• 2012

Recently, researches about the eco-friendly vehicles such as hybrid electric vehicle, fuel cell vehicle and electric vehicle have been actively carried out. The regenerative braking system is a key technology to improve the vehicle energy utilization efficiency because it transforms the kinetic energy to the electric energy through the electric motor. This new braking system requires cooperative control between electric controlled brake and regenerative brake. Therefore, it is necessary to establish fault-diagnosis and fail-safe evaluation criteria to secure reliability of the regenerative braking system. In this paper, the failure types and causes in regenerative braking system were analyzed. The transient behavior characteristics were examined based on fault-diagnosis and fail-safe upon failure of regenerative braking system.