• 제목/요약/키워드: boxed-heart square timber

검색결과 3건 처리시간 0.106초

소나무 수심 정각재의 건조 중 3차원 함수율 분포와 변이 (Three-dimensional Distribution and Variation of Moisture Content of Boxed-heart Square Timber of Pinus densiflora During Drying)

  • 강욱;이형우;정우양
    • Journal of the Korean Wood Science and Technology
    • /
    • 제34권1호
    • /
    • pp.7-14
    • /
    • 2006
  • 국산 소나무 간벌재를 이용한 수심 정각새(단면치수 $150{\times}150mm$)의 안전하고 신속한 건조를 위하여 열풍건조와 마이크로파건조중 수심 정각새의 함수율 분포와 그 변이를 3차원적으로 탐색하였다. 실험결과 마이크로파건조를 통하여 72시간 이내에 함수율 10% 미만까지 건조가 가능하였고 표면할열 발생도 최소화할 수 있었다. 건조 중 함수율 분포는 마이크로파건조의 경우 초기함수율 분포에 영향을 크게 받았다. 그러나 열기건조의 경우 초기함수율 분포가 건조초기에만 영향을 미치는 것으로 나타났다.

Finite Difference Evaluation of Moisture Profile in Boxed-heart Large-cross-section Square Timber of Pinus densiflora during High Temperature Drying

  • Kim, Hyunbin;Han, Yeonjung;Park, Yonggun;Yang, Sang-Yun;Chung, Hyunwoo;Eom, Chang-Deuk;Lee, Hyun-Mi;Yeo, Hwanmyeong
    • Journal of the Korean Wood Science and Technology
    • /
    • 제45권6호
    • /
    • pp.762-771
    • /
    • 2017
  • Predicting the amount and distribution of moisture content within wood allows calculating the various mechanical dynamics of the wood as well as determining the drying time. For boxed-heart wood with a large cross-section, since it is difficult to measure the moisture content of the interior, it is necessary to predict the moisture content distribution. This study predicted the moisture movement in boxed-heart red pine timber, during high temperature drying, by using the three-dimensional finite difference method for the efficient drying process. During drying for 72 h, the predicted and actual moisture content of the tested wood tended to decrease at a similar rate. In contrast, the actual moisture content at 196 and 240 h was lower than predicted because surface checking of the wood occurred from 72 h and excessive water emission was unexpectedly occurred from the checked and splitted surface.

대단면 수심정각재 건조를 위한 포화-과열증기 연속 건조 공정의 이용가능성 평가 (Applicability of Continuous Process Using Saturated and Superheated Steam for Boxed Heart Square Timber Drying)

  • PARK, Yonggun;CHUNG, Hyunwoo;KIM, Hyunbin;YEO, Hwanmyeong
    • Journal of the Korean Wood Science and Technology
    • /
    • 제48권2호
    • /
    • pp.121-135
    • /
    • 2020
  • 본 연구에서는 대단면 목재의 건조를 위해 포화증기와 과열증기를 연속 적용하는 공정의 이용 가능성을 평가해보고자 하였다. 낙엽송 수심 정각재를 건조하는 동안 표면층, 내부층 및 중심층의 슬라이스 시험편을 통해 함수율 변화를 확인한 결과 포화증기 건조 중에는 표면층과 내부층 사이에서, 과열증기 건조 중에는 내부층과 중심층 사이에서 함수율 경사가 크게 발생하였다. 하지만 각 슬라이스 층간의 함수율 경사에도 불구하고, 표면 할렬은 발생하지 않았으며, 내부 할렬은 수나 미성숙재 부근에서만 발생하였다. 슬라이스의 탄성 변형률과 낙엽송의 접선 방향 탄성계수를 통해 건조 중인 낙엽송 정각재의 건조 응력의 최댓값은 1.30 MPa이었고, 건조 응력이 최대인 시점 온도와 함수율 조건에서 낙엽송의 접선 방향 인장강도는 5.21 MPa로 추산된다. 즉, 포화증기 및 과열증기를 연속 건조 공정에서 목재의 건조 응력이 접선 방향 인장강도를 초과하지 않았기 때문에 표면에서 할렬이 발생하지 않았다. 내부 할렬 발생 억제를 위한 과열증기 건조 조건 완화와 같은 추가 연구를 통해 포화-과열증기 연속 건조 공정이 대단면 목재 건조에 이용 가능할 것이라 기대된다.