• 대한전자공학회논문지
• /
• 제25권8호
• /
• pp.950-958
• /
• 1988

We have implemented a RTA system using W-halogen lamps and tried to recrystallize the phosphorus ion implanted amorphous silicon on insultor (SOI) taking advantages of seeding window. The purpose of this study is to investigate the possibility of a typical crystalline orientation occurred during the solidifying process of molten amorphous silicon layer. Experimental results show that several twin boundaries are found on the seeding window region after annealing for 15 sec at 1040\ulcorner. These twin boundaries represent that the recrystallization is partialy possible and when the annealing is done at 1150\ulcorner, (100) etch pits with <110> facets are found on the solidified amorphous silicon layer. Consequently, Hall mobility of recrystallized silicon film is measured and the thermal behavior of grain boundary is also observed by SEM.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.91-102
• /
• 2015

Analytical solutions for the forced convection heat transfer of viscoelastic fluids obeying the Giesekus model are obtained in a concentric annulus under laminar flow for both thermal and hydrodynamic fully developed conditions. Boundary conditions are assumed to be (a) constant fluxes at the walls and (b) constant temperature at the walls. Temperature profiles and Nusselt numbers are derived from dimensionless energy equation. Subsequently, effects of elasticity, mobility parameter and viscous dissipation are discussed. Results show that by increasing elasticity, Nusselt number increases. However, this trend is reversed for constant wall temperature when viscous dissipation is weak. By increasing viscous dissipation, the Nusselt number decreases for the constant flux and increases for the constant wall temperature. For the wall cooling case, when the viscous dissipation exceeds a critical value, the generated heat overcomes the heat which is removed at the walls, and fluid heats up longitudinally.

• 한국전기전자재료학회논문지
• /
• 제21권3호
• /
• pp.197-202
• /
• 2008

In this paper, we proposed an analytical model for TFT which has series of the polycrystalline structures. An average speed is defined as carrier speed by the electric field. The effective square is suggested as the area of grain without depletion for the changed grain size. First, physical parameters such as grain size, channel lenght and trap density, have been changed to prove the validity of the average speed model and the value of the effective square has been estimated through drain-source current.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1059-1061
• /
• 2002

A FE model is to develop a personalized biomechanical model of the scoliotic spine that will allow the design of clinical test providing optimal estimation of the post-operation results. A flexible multi-body model of the spine including rib cage, clavicle, and scapular was developed to simulate several mobility simulations. Vertebrae, clavicle and scapular were represented using rigid bodies and ribs and sternum were modeled as flexible bodies. Kinematical Joints and spring elements were used to represent the intervertebral disc and ligaments respectively. Postero-anterior and lateral radiographics of a scoliotic spine were used to represent a 3D reconstruction. CT data for same patient were also used to verify vertebrae rotation driven from postero-anterior and lateral radiographic images. Simulated results showed good reducibility almost uniformly distributed along the spinal segments. It was also found that boundary and loading conditions, required to mimic the operation procedures, were proven to be very sensitive parameters to its results rather than its mechanical properties

• 한국주거학회논문집
• /
• 제11권1호
• /
• pp.103-113
• /
• 2000

The main purpose of this paper is to provide useful infonnation for residential site design in Korea by analyzing Japanese case. The important characteristics of Japanese design techniques are follows. First, the characteristics of residential site development can be expressed as "eco-friendly" and "public order". The patterns of spatial use also focuses on living environment improvement. Second, variety replaces unity in internal mobility plans. For example the width of street, size of park are not same in a site boundary. Third, to avoid street parking and commodity exhibition, commercial buildings are set-back and public parking lot is constructed. Fourth, fences of private house are made of trees rather than bricks. It connects green environment between internal and external space of houses.nal space of houses.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.693-698
• /
• 1995

We fabricated Zinc Oxide transparent conductive thin films with 2wt% of A1203 doping using rf magnetron sputtering. And we investigated electrical and optical characteristics of them which were made with conditions ; rf power 60-300W, thickness of film 3000 11000.angs.. Resistivity, carrier concentration and Hall mobility were investigated for electrical characteristics. Transmittance and optical band gap were investigated with Spectrophotometer in the wavelength range between 200-900 nm. As a result, ZnO thin film fabricated with rf power of 180W and thickness of 5000.angs. showed the best properties. At the best condition, the sample has resistivity of 1*10$\^$-4/.ohm.cm and transmittance of 95% in the visible range.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권12호
• /
• pp.559-561
• /
• 2003

We report a new excimer laser annealing method which successfully results in a single grain boundary formation in the channel of polycrystalline silicon thin film transistor. The proposed method is based on lateral grain growth and employs aluminum patterns which act as selective beam mask and lateral heat sink. The maximum grain size obtained by the proposed method is about 1.6${\mu}{\textrm}{m}$ in the length. The grainboundaries should be arranged parallel with the direction of current flow for the best device performance, so we propose a new device fabrication method and a new poly-Si TFT structure. Poly-Si TFT fabricated by the proposed method exhibits considerably improved electrical characteristics, such as high field effect mobility exceeding 240 $cm^2$/Vsec.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.430-430
• /
• 2010

MICC 방법으로 제작된 TFT는 large grain과 그에 따른 grain boundary의 감소로 인하여여, 소자의 전기적 특성을 좋게 할 수 있다. 본 연구에서는 bi-layer channel의 large grain size TFT를 제작하여 소자의 전기적 특성을 비교하였다. Channel의 width / length의 크기는 각 각의 경우 $7/5{\times}2$, $10/5{\times}2$, $15/5{\times}2$ (${\mu}m$)로 하였다. 소자의 성능 측정 결과 Field-effect mobility의 경우에는 channel width가 증가할 수록 감소하는 경향성을 나타내었으며, Threshold voltage의 경우에는 조금 감소하는 경향성은 있었으나 변화의 폭이 매우 작았다. Output characteristics 의 경우에는 모든 set에서 좋은 saturation 특성을 보였다. 이것은 current croding이 없었다는 것을 의미하는데, 큰 grain size로 인한 효과로 해석 할 수 있다. 본 연구에서는 bi-layer channel에서 corner effect에 중점을 두어 소자의 전기적 특성 변화에 대하여 논하였다.

• 대한지하수환경학회지
• /
• 제5권3호
• /
• pp.155-161
• /
• 1998

토립자 표면에서의 흡착에 의한 토양에서의 중금속의 지연효과는 잘 알려진 현상이다. 본 연구에서는 배치시험과 주상시험을 수행함으로써 사질 토양에서 Zn의 이동성에 대한 지연효과를 조사하였다. 주상시험은 파과곡선(BTC)으로 알려진 시간에 따른 용액의 농도를 측정함으로써 수행되었다. 추적자로는 10 g/L 농도의 NaCl과 ZnCl$_2$를 사용하였고, 각각의 용액을 토양시료의 상부경계에 순간주입한 후 정상류 상태에서 배출구로 빠져나온 용탈수의 농도를 EC-meter와 ICP-AES를 이용하여 측정하였다. 배치시험은 표준절차에 근거하여 이루어졌으며, 토양시료로부터 선별된 미세입자들을 다양한 초기농도의 ZnCl$_2$용액과 반응시켜 평형상태의 Zn 이온의 농도를 ICP를 이용하여 분석하였다. 주상시험의 결과는 i) ICP-AES에 의해 분석된 ZnCl$_2$의 첨두농도는 NaCl이나 총전기전도도로부터 구한 값보다 상당히 낮았고, ii) 두 종류의 추적자 모두 첨두농도의 도달시간은 상당히 일치하였다. 상대적으로 낮은 Zn의 농도는 Zn과 다른 양이온들간의 이온교환반응이 일어났고, 용탈수의 pH가 높은 값의 범위(7.0~7.9)에 있는 것으로 보아 Zn(OH)$_2$의 형태로 침전되었을 가능성이 있다는 것으로 설명될 수 있다. 첨두농도의 도달시간이 일치한다는 결과는 토양시료에서 지연효과가 일어나지 않았다는 것을 지시한다. Zn 이온의 뚜렷한 감소를 설명할 수 있는 유일한 방법은 CDE 모델에 용액상태에서 Zn 이온의 절대적 감소를 고려하는 감쇄계수(decay or sink coefficient)를 적용하는 것이었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.55.1-55.1
• /
• 2010

Cost efficient and large area deposition of superior quality $Al_2O_3$ doped zinc oxide (AZO) films is instrumental in many of its applications including solar cell fabrication due to its numerous advantages over ITO films. In this study, AZO films were prepared by a highly efficient rotating cylindrical dc magnetron sputtering system using AZO target, which has a target material utilization above 80%, on glass substrates in argon ambient. A detailed analysis on the electrical, optical and structural characteristics of AZO thin films was carried out for solar cell application. The properties of films were found to critically depend on deposition parameters such as sputtering power, substrate temperature, working pressure, and thickness of the films. A low resistivity of ${\sim}5.5{\times}10-4{\Omega}-cm$ was obtained for films deposited at 2kW, keeping the pressure and substrate temperature constant at 3 mtorr and $230^{\circ}C$ respectively, mainly due to an increase in carrier mobility and large grain size which would reduce the grain boundary scattering. The increase in carrier mobility with power can be attributed to the columnar growth of AZO film with (002) preferred orientation as revealed by XRD analysis. The AZO films showed a high transparency of>87% in the visible wavelength region irrespective of deposition conditions. Our results offers a cost-efficient AZO film deposition method which can fabricate films with significant low resistivity and high transmittance that can find application in thin-film solar cells.