• Economic and Environmental Geology
• /
• v.20 no.3
• /
• pp.203-209
• /
• 1987

The gravity measurement has been conducted at 69 points with an interval of about 1km along the national road between Masan and Busan through Kimhae to study on the subsurface geology and structure of Kyongsang basin. The Bouguer gravity anomalies were obtained from the observed gravity values, and interpreted by means of the Fourier-series method and Talwani method for 2-dimensional body. The depth of Conrad discontinuity is about 14.8km at the west end of survey line, and increases smoothly to about 13.6km at the east end. But it is uplifted by about 500m between Yangsan and Dongnae faults. The depth of the basement of Kyongsang basin is about 4.8km at the west end. It decreases gradually passing Masan, and reaches the maximum depth of 5.6km at the 15km east of Masan. Hereafter, it starts to increase to 4.3km at the east end. It is also uplifted by about 500m between Yangsan and Dongnae faults. The Bulgugsa granites which cause two low Bouguer gravity anomaly zones are distributed in the vicinity of Masan at depth of about 3.5km and Kimhae area at depth of about 5.3km. Diorite, granodiorite, aplite, and felsite are distributed with various depth of about 1~1.7km, and Jusasan andesitic rocks, except porphyritic one located at the west of Kimhae, are distributed with depth of about 1km. Three fracture zones associated with faults are located at the places where v-shaped Bouguer gravity anomalies are appeared.

• Journal of the Korean earth science society
• /
• v.24 no.3
• /
• pp.205-215
• /
• 2003

A precise and dense Bouguer anomaly is one of the most important data to improve the knowledge of our environment in the aspect of geophysics and physical geodesy. Besides the precise absolute gravity station net, we should consider two parts; one is to improve the precision in gravity measurement and correction of it, and the other is the density of measurement both in number and distribution. For the precise positioning, we have tested how we could use the GPS properly in gravity measurement, and deduced that the GPS measurement for 5 minutes would be effective when we used DGPS with two geodetic GPS receivers and the baseline was shorter than 40km. In this case we should use a precise geoid model such as PNU95. By applying this method, we are able to reduce the cost, time, and number of surveyors, furthermore we also get the benefit of improving in quality. Two kind of computer programs were developed to correct crossover errors and to calculate terrain effects more precisely. The repeated measurements on the same stations in gravity surveying are helpful not only to correct the drifts of spring but also to approach the results statistically by applying network adjustment. So we can find out the blunders of various causes easily and also able to estimate the quality of the measurements. The recent developments in computer technology, digital elevation data, and precise positioning also stimulate us to improve the Bouguer anomaly by more precise terrain correction. The gravity data of various sources, such as land gravity data (by Choi, NGI, etc.), marine gravity data (by NORI), Bouguer anomaly map of North Korea, Japanese gravity data, altimetry satellite data, and EGM96 geopotential model, were collected and processed to get a precise and dense Bouguer anomaly in and around the Korean Peninsula.

• Journal of the Korean earth science society
• /
• v.18 no.6
• /
• pp.522-528
• /
• 1997

Gravity surveys with accompanying spirit levelings were carried out in Mt. Hangye area. From these survey results, orthometric height correctioins were calculated. The correction reaches 5 cm when the height difference is 900 m in this area. The corrections were also calculated using an available Bouguer anomaly map, and they are little different from the previous results. In conclusion, orthometric height corrections are necessary in precise spirit leveling, specially in higher lands, and they can be easily calculated from an available Bouguer anomaly map without laborious gravity surveys.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.88-95
• /
• 2010

An airborne gravity survey using a helicopter was carried out in October 2008, offshore along the northern Noto Peninsula, to understand the shallow and regional underground structure. Eleven flight lines, including three tie lines, were arranged at 2 km spacing within 20 km of the coast. The total length of the flight lines was ~700 km. The Bouguer anomalies computed from the airborne gravimetry are consistent with those computed from land and shipborne gravimetry, which gradually decrease in the offshore direction. So, the accuracy of the airborne system is considered to be adequate. A local gravity low in Wajima Bay, which was already known from seafloor gravimetry, was also observed. This suggests that the airborne system has a structural resolution of ~2 km. Reduction of gravity data to a common datum was conducted by compiling the three kinds of gravity data, from airborne, shipborne, and land surveys. In the present study, we have used a solid angle numerical integration method and an iteration method. We finally calculated the gravity anomalies at 300 m above sea level. We needed to add corrections of 2.5 mGals in order to compile the airborne and shipborne gravity data smoothly, so the accuracy of the Bouguer anomaly map is considered to be nearly 2 mGal on the whole, and 5 mGals at worst in limited or local areas.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.283-293
• /
• 2021

The homogeneity of the compacted ground was analyzed using drone-based remote terrain and gravity field data. Among the topographic elements calculated by the hydrological algorithm, the topographic curvature effectively showed the shape of the surface that occurred during the compaction process, and the non-uniformly compacted area could be identified. The appropriate resolution of the digital topography requires a precision of about 10 cm. Gravity field Interpretation was performed to analyze the spatial density change of the compacted ground. In the distribution of residual bouguer gravity anomaly, the non-homogeneously compacted area showed a different magnitude of gravity than the surrounding area, and the difference in compaction was identified through gravity-density modeling. From the results, it is expected that the topographic element and gravitational field analysis method can be used to evaluate the homogeneity of the compacted ground.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.285-296
• /
• 1998

As a part of the study for understanding the deep geological structure of the Ogcheon Zone, both gravity and geomagnetic surveys are performed. A 70km survey line of which direction is nearly perpendicular to major faults in the southern tip of the Zone. The observed data are corrected and transformed into Bouguer and total magnetic intensity anomalies, respectively. Recent studies for petrology and geochemistry in the southwestern Ogcheon Zone in the vicinity of the survey line are reviewed for better interpretation. Both gravity and geomagnetic anomalies abruptly change around Janghung area, the southern boundary of the, Ogcheon Zone. This rapid increase of Bouguer anomaly around Janghung area can be explained by a deep seated normal fault with fairy large displacement between Precambrian gneisses and the denser intermediate plutonic rocks. It is believed that the fault acted an important role for the formation and evolution of the Ogcheon Zone. A pseudomagnetic intensity anomaly is calculated from the Bouguer anomaly assuming that the both anomalies are associated with the common source. From the origin of the survey line to the 50km point, the calculated anomaly coincides with observed magnetic anomaly. Whereas both anomalies show negative correlation in the outside 50km. From the residual Bouguer anomalies, the subterranean geological structure is provided through the iterative forward method. The initial model is obtained from informations about the surface geology as well as the results of the inverse method.

• Journal of the Korean earth science society
• /
• v.33 no.6
• /
• pp.534-543
• /
• 2012

The relationship between tectonic uplift and geophysical analysis of gravity anomalies and the in-situ stress fields in the Otway Ranges, SE Australia is addressed in this study to understand the nature and possible mechanism for the neotectonic movements. The uplift axis of the ranges is coincident with the regional Bouguer gravity highs whereas thick Tertiary sedimentary successions are highly correlated with the gravity lows along the basin rift geometry. This result suggests that the gravity highs are separated by the thick Tertiary sedimentary successions. Regional structural trends associated with faults and foldings of the deformed surfaces are consistent with the prevailing NW-SE $S_{Hmax}$ trend in this part of the continent. The anomalously positive correlation between topography and Bouguer gravity fields suggests possibly a lithospheric flexural deformation mode at a long wavelength (order of $10^2$ kms) in the region. It also suggests that the reactivation of pre-existing lithospheric structures driven by plate boundary forces plays a key role in this mode.

• Economic and Environmental Geology
• /
• v.2 no.2
• /
• pp.1-35
• /
• 1969

The structure and geologic history of the Triassic basin in southern Connecticut have been interpreted by using gravimetric data. A gravity survey of 800 gravity stations was made by the U.S. Geological Survey in the southern Connecticut area. The resulting data were reduced by the Bouguer method and then plotted and contoured along with the generalized geology. Residual gravity maps were prepared by different methods to obtain the most plausible agreement with the known geology of the area. Seven gravity profiles across the basin are presented to show the distribution of the Triassic deposits that could produce the measured anomalies. It is concluded that the basin was formed by successive step faulting in the late Triassic period and that the sediments accumulated progressively in this basin. The deepest portion of the basin is located in the middle of the present Triassic belt and reaches a depth of about 2 miles below the surface. The data also appear to indicate the possible source areas for the basalt which at present forms the lava flows, sills, and dikes exposed in the Cheshire and Gaillard regions. The information concerning the tectonic history of the Connecticut Triassic Valley aids considerably in establishing the geologic history of the Appalachians in late Triassic time.

• The Korean Journal of Petroleum Geology
• /
• v.13 no.1
• /
• pp.17-23
• /
• 2007

Gravity characteristics are investigated in the vicinity of the DASAN scientific station, located at the Svalbard Archipelago, the Arctic using ArcGP data. Boundary effects of free-air gravity anomalies, which appeared generally at the continental margin, are erased after Bouguer correction was applied. Complete Bouguer anomalies produced after terrain correction by GrOPO30 show that gravity anomalies increase from continent to marine. This phenomena seem to be related to the rise of Moho discontinuity. The cut-off frequency of 0.16 was decided after power spectrum analysis and the gravity anomalies were divided into two parts. Residual anomalies in high frequency part show that characteristics of high values along the faults and of low values related to thick sediments in the continent. Characteristic is low values from basement subsidence of continental slope or thick sediments in the marine. The undulation of Moho discontinuity from 3-D inversion modeling show typical characteristics of continental margin that become higher from Svalbard archipelago to Knipovich ridge bordering Eurasian plate.

• Geophysics and Geophysical Exploration
• /
• v.22 no.1
• /
• pp.37-43
• /
• 2019

We present gravity anomaly maps based on KIGAM's gravity data measured from 2000 to 2018. Until 2016, we acquired gravity data on about 6,400 points for the purpose of regional mapping covering the whole country with data density of at least one point per $4km{\times}4km$ for reducing the time of the data acquisition. In addition, we have performed local gravity surveys for the purpose of mining development in and around the NMC Moland Mine at Jecheon in 2013 and in the Taebaeksan mineralized zone from 2015 to 2018 with data interval of several hundred meters to 2 km. Meanwhile, we carried out precise gravity explorations with data interval of about 250 m on and around epicenter areas of Gyeongju and Pohang earthquakes of relatively large magnitude which occurred in 2016 and in 2017, respectively. Thus we acquired in total about 9,600 points data as the result. We also used additional data acquired by Pusan National University for some local areas. Finally, gravity data more than 16,000 points except for the repetition and temporal control points were available to calculate free-air, Bouguer, and isostatic gravity anomalies. Therefore, the presented anomaly maps are most advanced in spatial distribution and the number of used data so far in Korea.