• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.554-558
• /
• 2016

The solubility of nickel ferrite in an aqueous solution of boric acid was studied by varying the pH at the temperatures ranging from $25^{\circ}C$ to $320^{\circ}C$. A flow-through autoclave system was specially designed and fabricated to measure the solubility of Fe in hydrothermal solutions under high temperature and pressure. The performance of this flow-through system was directly compared with the conventional static state technique using a batch-type autoclave system. The stability of fluid velocity for the flow-through autoclave system was verified prior to the solubility measurement. The influence of chemical additives, such as boric acid and $H_2$, on the solubility of nickel ferrite was also evaluated.

• 한국세라믹학회지
• /
• 제41권11호
• /
• pp.804-811
• /
• 2004

본 연구는 colemanite원광을 출발원료로 하여 붕산을 추출하는 공정에서 마이크로파 적용에 대한 연구로, 황산을 첨가하고 가열하여 colemanite의 칼슘 성분을 황산칼슘으로 분리하여 내고, 액상에 존재하는 붕소 성분은 붕산으로 재결정화 하여 제조하였다 Colemanite에 황산을 첨가해 가열하는 공정에 마이크로파를 적용하면, 일반 가열원을 사용하였을 때와 비교하여 적은 양의 황산을 사용하여 추출이 가능하고, 가열시간을 단축하는 것이 가능하였다. 생성된 붕산의 순도는 일반 가열원을 사용하였을 때와 동등한 수준이고 열 특성 또한 동일하였으나, 입자의 크기는 작아졌다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.49-57
• /
• 2023

This research aimed to evaluate the durability of Samama (Anthocephalus macrophyllus) wood treated with boron preservatives, citric acid (CA), and heating against termites. Wood samples were impregnated firstly with 5% boron solutions, such as boric acid, borax and boric acid + borax combination at 1:1 (w/w). The second impregnation used 5% CA. The impregnations were conducted in a pressure tank at 7 kg/cm² for 4 hours. After impregnation, the samples were heat treated at 80℃ or 160℃. All the treated and control samples were exposed to decay fungi, drywood termites and subterranean termites based on SNI 7207:2014 standard. The results showed that boron preservatives reduced fungal attacks on Samama wood. The combination treatment of boric acid, CA and heat treatment at 160℃ was also effective to increase the resistance of Samama wood against white- and brown rot fungi, and drywood termites. Heat treatment consistently improved the resistance of Samama wood from decay fungi.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권4호
• /
• pp.1-7
• /
• 2004

납으로 오염된 토양을 정화하는 방법인 토양수세기법에 가장 효율적인 용출제를 선정하기 위해서 여러 가지 유기산의 납 제거효율을 측정한 결과 0.01M의 EDTA 주입 시 납 제거효율은 $69.4\%$로 같은 농도의 다른 유기산과 비교해서 가장 높은 효율을 보였다. 또한 0.01M의 EDTA에 0.1M의 여러 가지 무기산을 혼합한 후 납 제거효율을 비교한 결과 EDTA와 붕산 혼합용출제가 pH5에서 $68.8\%$로 가장 높았다. EDTA와 붕산 혼합용출제의 경우 0.01M의 EDTA에 붕산의 주입농도를 0.1M에서 0.4M로 증가시킬 경우 납의 탈착/제거율은 $68\%$에서 $45\%$로 감소하였다. 그러나 0.1M의 붕산에 EDTA의 주입농도를 0.01M에서 0.04M로 증가시킬 경우 투수율은 $6.98{\times}10^{-4}cm/sec$에서 $5.99{\times}10^{-4}cm/sec$로 감소하였다. 이처럼 EDTA는 납의 탈착/제거율을 증가시키는 반면 투수율를 감소시키는 단점이 있다. 그러나 0.03M EDTA에 0.1M 붕산을 첨가한 경우 EDTA만을 주입한 경우와 비교해서 투수율이 $4.41{\times}10^{-4}cm/sec$에서 $6.26{\times}10^{-4}cm/sec$로 약 $30\%$ 증가되었다. 실제 중금속 오염토양에서 납의 제거효율은 납의 탈착/제거율과 오염토양 내 용출제의 투수율의 함수로 정의할 수 있으며, 최적의 [EDTA]/[붕산] 몰비는 [0.01M]/[0.1M]로 조사되었다.

• 분석과학
• /
• 제21권5호
• /
• pp.397-402
• /
• 2008

이산화우라늄을 질산 및 미량의 불산으로 녹인 다음 우라늄 매트릭스로부터 규소를 분리하지 않고 분광광도계(spectrophotometer)로 측정할 수 있는 분석조건을 검토하였다. 분광광도계로 미량의 규소를 측정할 때 미량의 불산이 규소 분석에 미치는 영향을 조사하였으며, 불산의 간섭을 방지하기 위하여 붕산을 사용하였다. 우라늄 용액에서 미량의 불산이 존재할 경우 포화붕산 사용 유무에 따른 규소의 회수율은 각각 $103.3{\pm}0.8$ 및 $76.6{\pm}6.8%$이었다. 포화붕산의 양은 규소의 회수율에 크게 영향을 미치지 않았다. 따라서 본 방법으로 이산화우라늄 분말 중의 불순물로 존재하는 미량의 규소를 분리 과정없이 바로 UV-VIS 분광광도법으로 정량할 수 있었다.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.7-12
• /
• 1992

The smouldering combustibility of cellulose insulation treated with boric acid-borax-aluminium sulfate as combustion retardants are examined by cigarette ignition method and electrical cardrige heater method. The effectiveness of Aluminium sulfate as a third combustion are acceptable both smouldering resistance and flame resistance at 18% level of all examined formulation. As the proportion of Aluminium sulfate in the formulation was increased, the flame resistance of cellulose insulation was improved.

• 한국응용곤충학회지
• /
• 제43권1호
• /
• pp.55-60
• /
• 2004

담배거세미나방 핵다각체병바이러스(SINPV)의 살충력 증가를 위하여 유기산 및 기능성 물질을 첨가하여 활성을 검정한 결과는 다음과 같다. 핵다각체병바이러스(NPV) 1${\times}$$10^{5}$ PIBs/$m\ell$에 ascorbic acid, succinic acid, sulfanilic acid 2,000ppm을 바이러스 1${\times}$$10^{5}$ PIBs/$m\ell$에 첨가하였을 때 각각 7.0일, 7.일, 10.7일로 바이러스 단독으로 처리한 6.0일보다 더 높게 나타났으나 boric acid 2,000ppm을 첨가한 경우 L $T_{50}$은 4.5일로서 단독처리보다 1.5일 짧았다. 유충 체중변화에서도 boric acid는 2,000ppm에서 7일째 이후 생존하는 개체가 없어 가장 효과가 좋은 것으로 나타났으며 1,000ppm과 500ppm에서도 체중이 증가하지 않아 바이러스 활성 증진을 지속시키는 물질로 판단되었다. 기능성 물질과 혼합 처리에서는 바이러스 1${\times}$$10^4$ PIBs/$m\ell$ 단독 처리는 L $T_{50}$이 7.4일이 걸리는 반면 담배거세미나방 핵다각체병바이러스와 전해산화수, 키토산, 목초액 혼합처리는 모두 살충기간이 길어져 혼합효과가 없었다. 담배거세미나방 핵다각체병바이러스 농도 1.0${\times}$10$_{6}$, $10^{8}$ PIBs/$m\ell$와 기능성 물질을 혼합하였을 때도 같은 경향으로 오히려 바이러스 병원성 억제효과가 나타났다.

• Nuclear Engineering and Technology
• /
• 제28권4호
• /
• pp.349-358
• /
• 1996

The leaching behavior of uranium from unirradiated CANDU UO$_2$ fuel pellet in the spent fuel wet storage and disposal conditions has been investigated. A modified IAEA leach test method was used, and then the extent of leaching was monitored by analysis for uranium in the leachant. The leach test has been performed in various leachants(demineralized water and boric acid solution at pH=6, synthetic granite groundwater) for a long-term period of 5.4 years, and the effect of temperature on the leach rate of uranium has been analyzed. The leach rates of uranium at $25^{\circ}C$ were dependent on the leachants. Over initial 100 days of leach periods, the leach rate in groundwater was the highest in three leachants and no significant differences of leach rates ore observed in the demineralized oater and boric acid solution. But these leach rates in three leachants around 2,000 days at $25^{\circ}C$ appeared to be reached the steady rates in the range of 1~5$\times$10$^{-8}$ g/$\textrm{cm}^2$ day. The leach rate of uranium in groundwater shooed to be independent of the temperature, but those in both demineralized water and boric acid solution increased with temperature. These results show that the leaching behavior of uranium from UO$_2$ fuel in both the demineralized water ann boric acid may be controlled tv the surface oxidative.dissolution reaction of UO$_2$ and the leach rate of uranium in groundwater at room temperature could mainly be controlled by the complex reaction of dissolved uranyl ions with carbonate ions and no variation of leach rate of UO$_2$ in groundwater with temperature may be due to the local deposition of passivating uranyl phases on the surface.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.315-325
• /
• 2020

Boron compound had many advantages as wood preservative, but it was prone to leaching. Improving boron preservation was required to extend the service life of fast growing and low durability red jabon (Antochephalus macrophyllus) hardwood. This study aimed to evaluate the dimensional stability, color change and durability of modified red jabon wood by double impregnation with boron and methyl methacrylate (MMA) and heat treatment. Impregnation I used boric acid or borax, and impregnation II used MMA, while heat treatment used temperatures of 90 ℃ or 180 ℃ for 4 hours. The dimensional stability, leachability, water absorption, color change and decay resistance of modified red jabon wood were tested. The results showed that MMA impregnation increased the dimensional stability of red jabon wood, while the leaching and water absorption in the wood significantly reduced. Heating at 180 ℃ caused less water absorption and higher dimensional stability of the wood than that of heating at 90 ℃. Impregnation with boric acid and MMA followed by heating at 90 ℃ resulted in the highest wood ASE, 89.9%. The color change (∆E^*) of wood increased significantly after MMA impregnation and heating at 180 ℃. Boric acid impregnation caused more resistant wood than borax impregnation against decay fungi and termites. Impregnation with boric acid and MMA followed with heating at 180 ℃ increased significantly the wood resistance against decay fungi and termites.

• 한국표면공학회지
• /
• 제18권4호
• /
• pp.153-163
• /
• 1985

In the electroless nickel plating bath which contained nickel sulfate, sodium hypophosphite, boric acid and triethanolamine, effect of their concentration on the rate of deposition was tested by gravimetric method and polarization method. The polarization method that polarize small range of voltage anodicaly and cathodicaly at the mixed potential in the electroless plating bath can calculate mixed current (depositing rate) from $i_{mp}=\frac {i}{\eta}\;\frac{RT}{nF}\;or\;i_{mp}=\frac{i}{\eta}\;\frac{1}{2.3}(\frac{b_a\;\;b_c}{b_c+b_a})$ Where $i_{mp}$ is the depositing current, i is the polarized current, ${\eta}$ is the polarized voltage, $b_a\;and\;b_c$ are the Tafel slop of anodic and cathodic polarization curves respectively. The calculated mixed current ($i_{mp}$) is proportional to the depositing rate obtained by gravimetric method and corresponded mostly to the real depositing rate by multifying supplementary constant. The polarization method can be used for founding inclination of reaction on various concentration of each composition. Decreasing or increasing concentration of triethanolaminc as a complexing agent , the depositing rate is decreased and when the bath contained 25-50mL/L of triethanoloamine, the depositing rate is increased. The depositing rate is increased with increasing the concentration of boric acid, and when the bath contained 0.5M of boric acid, the depositing rate is increased abruptly. The optimum composition of the electroless nickel bath was estimated 0.1M of nickel sulfate, 0.25M of sodium hypophosphite, 0.5M of boric acid, and 25-50mL/L of triethanalamine.