• 제목/요약/키워드: boric acid

검색결과 221건 처리시간 0.035초

붕소 화합물로 처리된 편백나무 시험편의 연소특성 (Combustion Characteristics of Cypress Specimens Painted with Solutions of Boron Compounds)

  • 정영진;진의
    • 한국화재소방학회논문지
    • /
    • 제32권2호
    • /
    • pp.1-6
    • /
    • 2018
  • 붕산과 5붕산암모늄으로 처리한 편백나무 시험편의 연소특성에 관한 실험을 ISO 5660-1 표준에 따른 콘칼로리미터를 이용하여 수행하였다. 그 결과 붕산과 5붕산암모늄의 혼합된 투여는 그들의 시너지 효과에 의해 화재성능지수 값을 향상시켰다. 또한 붕소 화합물로 처리한 시험편은 공시편보다 총열방출율 값이 6.1~14.1% 감소되었다. 붕소화합물로 처리된 시편의 총연기방출율은 연소과정 전반에 걸쳐 감소되었으나 붕산/5붕산암모늄은 예외였다. 일산화탄소 최대농도는 15.8~25.5% 정도 감소하는 경향성이 있었다. 대체적으로 난연제로 처리한 목재는 화재 위험성이 낮아진 것으로 이해된다.

구조용(構造用) 내화처리(耐火處理) 합판(合板)의 재건조(再乾燥)에 관(關)한 연구(硏究) (Redrying Fire - Retardant - Treated Structural Plywood)

  • 이필우;이.엘,샤풔
    • Journal of the Korean Wood Science and Technology
    • /
    • 제9권4호
    • /
    • pp.1-21
    • /
    • 1981
  • 미송(美松) 및 포푸라 내수합판(耐水合板)을 내장용내화제(內裝用耐火劑)로 가압처리한 다음 저온(低溫), 중온(中溫) 및 고온건조상태(高溫乾燥狀態)에서 재건조(再乾燥)를 실시(實施)하였다. 붕사(硼砂)-붕산(硼酸), 크롬화(化) 염화아연, 미나리스, 파이레소오트 및 일종(一種)의 상업용(商業用) 내화제(耐火劑)로 내화처리(耐火處理)를 실시(實施)하였다. 건조방법(乾燥方法)은 키른건조(乾燥)와 열판건조(熱板乾燥)를 적용(適用)하였으며 건조속도(乾燥速度)와 건조결함(乾燥缺陷)에 관하여 검토(檢討)하였다. 붕사(硼砂)-붕산(硼酸)은 수분처리합판(水分處理合板)과 유사(類似)한 건조속도(乾燥速度)를 나타내었으나 기타(其他)의 내화제(耐火劑)는 일층(一層) 늦은 건조속도(乾燥速度)를 나타내었고 더 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 특(特)히 크롬화(化) 염화아연은 가장 건조속도(乾燥速度)가 느렸으며 가장 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 열판건조(熱板乾燥)는 키른 건조(乾燥)와 비교(比較)하여 같은 온도수준(溫度水準)에서 삼배(三倍)나 더 빨리 건조(乾燥)하였으나 열판압력을 50 $1b/in^2$(3.52$kg/cm^2$)를 적용(適用)하였기 때문에 두께 수축율(收縮率)은 이배(二倍)를 나타내었다.

  • PDF

Physical and Mechanical Properties and Fire-endurance Characteristics of Recycled Particleboards

  • Suh, Jin-Suk;Han, Tae-Hyung;Park, Joo-Saeng;Park, Jong-Young
    • 한국가구학회지
    • /
    • 제19권6호
    • /
    • pp.475-486
    • /
    • 2008
  • In this study, fire-retardant chemicals were melt with mixed composition ratios of dibasic ammonium phosphate and each half of boric acid and borax in hot water, in which hammer-milled chips were immersed to increase swelling of waste particleboards. Also, fire-retardant treated particles from sawn lumber chip and recycled particleboard chip were composed in ratio of 70:30 in core layer to improve boards' properties. Retention ratio of fire-retardant chemicals for the particles for face layer was high due to high specific surface area, and that of sawn lumber chips was somewhat higher than that of recycled particleboard chips. The mixture of particles from sawn lumber chips and recycled PB of 70:30 in weight ratio exceeded bending strength of 100 $kgf/cm^2$. It seemed that the relatively greater portions of dibasic ammonium phosphate affected adversely to dimensional stability, however fire-retardants treatment resulted in distinct effect lowering formaldehyde emission such as $E_0$ type(0.5mg/$\ell$ or less) in KS F 3104. In fire-retardancy, the recycled boards with a mixed ratio of dibasic ammonium phosphate to boric acid borax(50:50 mixture) of 70% to 30% in weight satisfied fire-retardancy 3rd grade in KS F 2271, and also this composition from cone calorimeter test met same standard grade figuring total heat release of 4.6MJ/$m^2$.

  • PDF

Corrosion behavior of SA508 low alloy steels exposed to aerated boric acid solutions

  • Lim, Yun Soo;Hwang, Seong Sik;Kim, Dong Jin;Lee, Jong Yeon
    • Nuclear Engineering and Technology
    • /
    • 제52권6호
    • /
    • pp.1222-1230
    • /
    • 2020
  • The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe2O3, and Fe3O4. As the boron concentration decreased and the temperature was increased, the formation of Fe3O4 was more favorable as compared to the formation of FeO(OH) and Fe2O3. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe2O3 forms as a corrosion product.

기포탑 반응기에서 조작변수가 meta 붕산 생성반응 전환율에 미치는 영향 (Effects of Operating Variables on the Conversion of Meta Boric Acid Formation in a Bubble Column Reactor)

  • 조수행;도재범;강용
    • 공업화학
    • /
    • 제7권3호
    • /
    • pp.573-579
    • /
    • 1996
  • 공업적 기포탑 반응기의 설계, scale-up, 조절, 개발 및 운전에 매우 긴요한 기초자료들을 얻기 위하여 실험 실적 규모의 기포탑 반응기에서 각 실험변수들이 ortho 붕산으로부터 meta 붕산의 생성 반응전환율에 미치는 영향을 연구하였다. 반응시간 및 압력, 반응물의 입자크기 및 기체 유속 등을 실험변수로 선택하였으며, 이들 실험변수들이 기포탑 반응기내의 기체 체류량에 미치는 영향들을 반응의 전환율과 연계하여 또한 검토하였다. 연구의 결과, 다음과 같은 최적 반응조건을 얻을 수 있었다 : 반응시간 ; 35~40(분), 반응압력 ; 92~95(kPa), 반응입자의 크기 ; $0.6{\times}10^{-3}(m)$ 이하, 기체 유속 ; 0.07~0.08(m/s).

  • PDF

내화처리 목재의 기계적 성질 (Mechanical Properties of Fire-Retardant Treated Wood)

  • 이현미;김종만;변희섭
    • Journal of the Korean Wood Science and Technology
    • /
    • 제32권5호
    • /
    • pp.1-11
    • /
    • 2004
  • 국내에서 성장하고 있는 소나무재(Pinus densiflora Sieb. et Zucc)와 이태리포플러재(Populus euramericana Guinier)에 제1인산암모늄(monoammonium phosphate, MAP)과 붕산(boric acid)을 혼합 약제로 처리하여, 난연재이면서 방부재인 처리재를 백색부후균(Trametes versicolor)과 갈색부후균(Tyromyces palustris)으로 부후시켜 처리재와 무처리재의 종압축강도를 측정하고 주사전자현미경으로 판독하였다. 무처리재보다 처리재의 비중과 압충강도가 높은 것을 알 수 있었고 수종별에 따르면 이태리포플러재보다 소나무재의 비중과 압축강도 역시 높은 것으로 나타났다. 그리고 주사전자현미경의 사진상에서 무처리재와 약품처리재에 T. versicolor균과 T. palustris균으로 부후시킨 결과 부후가 진행됨에 따라 무처리재가 처리재보다 세포벽의 파괴가 현저함을 보여 주었고, 또한 T. versicolor균과 T. palustris균의 부후성을 보면 T. palustris균의 목재 열화가 다소 증가하였다.

붕소 엽면시비가 참깨가 생육 및 수량에 미치는 영향 (Effect of Foliar Application of Boron on Growth and Yield in Sesame)

  • 정병관;김동관
    • 한국작물학회지
    • /
    • 제41권4호
    • /
    • pp.441-449
    • /
    • 1996
  • 붕소의 엽면살포에 따른 참깨의 생육, 수량 및 여러 형질의 변화를 구명하고자 평휴, 휴고(15cm) 처리별로 구분하고, 붕소의 농도를 무살포, 0.2%, 0.4%별로 주경 11절기에 각각 전엽면에 살포하였던 결과를 요약하면 다음과 같다. 1. 붕소 살포에 의한 엽면적의 증가는 평휴, 휴고 15cm모두 농도 증가에 비례하여 5절엽과 11절엽에서 증가 효과를 나타냈고, 경태는 평휴에서만이 붕소 엽면살포 농도에 비례하여 증가하였으며, 지상부 건경엽중은 붕소 엽면살포에 의하여 평휴, 휴고 15cm 모두 증가효과를 가져왔다. 2. 주당 꼬투리수는 평휴에서만이 붕소 엽면살포 농도에 비례하여 증가하였고, 1,000립중은 평휴 처리시 중단부위 이하의 꼬투리에서 붕소살포농도와 비례적으로 무거워진 경향이었으나, 휴고 15cm에서는 0.2% 농도에서 만이 증가경향을 나타냈다. 3. 종실중은 평휴, 휴고 15cm 처리 모두 붕소 살포농도가 증가할수록 건경엽중, 주당 꼬투리수, 1,000립중 등의 증가로 증수되었고, 이 경향은 평휴에서 현저하였다. 4. 붕소 엽면살포 효과를 절위별 꼬투리내 종실중비로서 보면 상단부위의 종실중은 평휴보다 휴고 15cm에서 7%가 무거워진 경향이었고, 붕소 엽면살포에 의한 종실중 증가와 유관한 형질들은 평휴 처리시 엽면적, 경태, 주당 꼬투리수 및 중단부 이하의 천립중 등이었고, 휴고 15cm 처리시는 건경엽중 뿐이었다. 5. 붕소 엽면살포에 의한 여러 형질들 간의 상호관계를 보면 평휴에서 경태는 엽면적 및 하단부위의 천립중과 그리고 엽면적은 주당 꼬투리수, 건물중 및 중단부 이하의 천립중 등과, 건물중은 중단부 이하의 천립중과 유관하였으나, 평휴 15cm는 엽면적과 주당 꼬투리수 간에 비례적인 상호관계가 있을 뿐이었다.서 높았으며, 두처리 모두 시비수준이 높을수록 높았으나, 무경운재배에 비하여 경운재배에서는 시일의 경과에 따라서도 차이가 크지 않았고 함량도 낮았다. 6. 양이온함량은 모두 경운 유 ㆍ무에 관계없이 시비수준이 높을수록 높은 경향을 보였고, 10일에 최고수준을 보인 후 완만한 감소를 나타냈으며, $K^{+}$, $Ca^{2+}$에 비해 $Mg^{2+}$이 보다 낮은 함량을 보였다.989년산 일반계를 10분도와 12분도로 도정하였을 때 도정도에 따른 밥맛의 차이는 없었다.X>$CoO_x$는 $Co_3O_4$로 존재하고, 반응 전의 경우에는 이와는 다른 chemical state를 보여주었다. XRD 및 XPS 결과를 바탕으로, 촉매표면에 존재하는 $Co_3O_4$의 외부표면이 $Co_2TiO_4$$CoTiO_3$ 같은 $CoTiO_x$로 encapsulation되어 있는 모델구조를 제안할 수 있고, 이는 반응시간의 함수로 나타나는 촉매활성에 있어서 전이영역의 존재를 잘 설명할 수 있을 뿐만 아니라, XRD와 XPS에서 얻어진 촉매의 물리화학적인 특성을 잘 반영할 수 있다. 나타냈고, 골격근과 눈 조직에서 피루브산에 대한 LDH의 친화력이 상당히 크므로 LDH가 혐기적 조건에서 효율적으로 기능을 하는 것으로 사료된다.5) and "Cleanliness of clothes & features" (p <0.05) of VIP ward were significantly higher than those of a general ward.tive to apply.아울러 고려(考慮)해야 한다

  • PDF

니켈도금액중의 붕산 신속정량법 (Rapid Analysis of Boric Acid in Nickel Plating Solutions)

  • 염희택
    • 한국표면공학회지
    • /
    • 제3권1호
    • /
    • pp.7-12
    • /
    • 1970
  • Only mannitol or glycerine is generally used for the determination of boric acid in a nickel plating solution in order to make its acidic property so strong that it can be titrated with NaOH. However, these solutions give very amgiguous color change of indicator due to the precipitation of nickel salts . Therefore, only experienced dchemistsorwell trained workimen can accurately confirm the actual end point of the titratiion. For eliminating such interference of nickel salts and easily confirming the end point by any persons , the author attempted to find out a solution which produces no precipitates during the titration in these experiments, and also he tried to funish the reason for ambiguousness in titration. The following results were obtained after many experiments. (1) In any titrations which produce nickel salts such nI(oh)$_2$, the salt is formed umption very approximate to the end point, which shows some error by the consumption of titrant(NaOH) . Then, the pink color of phenolphthalein is absorbed by Ni(OH)$_2$ and the pH jumping at the end pint is also diminished to as little as less than 15% of the total phenophthalein ph range. (2) Known methods by complex salts of citrate,w hich do not produce precipitates of Ni(OH)$_2$, are also not very satisfactory, because, the pH jumping at the end point is only about 35% and the color change of phenolphthalein is form blue-green to purple-blue. (3) New method by complex salts of oxalate were attempted in these experiments. They also did not produce precipitates of Ni(OH)$_2$ and were very satisfactory in color change at the end of point was about 65% and the color change was from blue-green to purpled. In this methods, analytica cost was minimized by the use of less amounts of cheaper chemicals than the conventional citrates complex methods. The mixture of chemicals used was composed methods. The mixture of chemical used was composed of 37g/ι of sodium oxalate(Na$_2$C$_2$O$_4$$.$5H$_2$O), 2g/ι of phenolphthalein, and 400ml /ι of glycerin. The accuracy of analysis was within the error of 0.5%. (4) The procedure of analysis was as follows. One ml of nickel plating solution was taken out and to it were added 20ml of water and 20 ml of the above mixture for the indicator. The solution was titrated with 0.1N NaOH. The quantity of boric acid was calculated by the following equation. Boric acid (g/ι) = 6.184${\times}$F${\times}$ml .

  • PDF

붕소/실리콘 졸 화합물로 도포된 편백 목재의 연기유해성 평가 (Smoke Hazard Assessment of Cypress Wood Coated with Boron/Silicon Sol Compounds)

  • 진의;정영진
    • 한국화재소방학회논문지
    • /
    • 제34권1호
    • /
    • pp.1-10
    • /
    • 2020
  • 본 연구는 건축 및 내구재용 목재인 편백 목재에 붕소/실리콘 졸 화합물을 처리한 후 화재위험성을 연기 유해성에 대하여 연기성능지수(SPI), 연기성장지수(SGI)와 연기강도(SI)를 중심으로 조사하였다. 화합물은 Tetraethoxyorthosilicate를 Boronic acid와 Boric acid 유도체와 반응시켜 합성하였다. 연기 특성은 편백목재에 대하여 Cone calorimeter (ISO 5660-1) 장비를 이용하여 조사하였다. 화재강도는 50 kW/㎡의 외부 열 유속(External heat flux)으로 고정시켰다. 연소 반응 후 측정된 연기성능지수는 편백목재와 비교하여 13.4~126.7% 증가하였다. 연기성능지수에 의한 화재위험성은 편백목재, PBA/Si, IBBA/Si, BA/Si 순서로 감소하였다. 연기성장지수는 편백목재와 비교하여 12.0~57.5% 감소하였다. 연기성장지수에 의한 화재위험성은 편백목재, PBA/Si, IBBA/Si, BA/Si 순서로 낮아졌다. 연기강도에 의한 화재위험성은 3.2~57.8% 감소하였으며 편백목재, PBA/Si, IBBA/Si, BA/Si 순서로 낮아졌다. COpeak 농도는 85~93 ppm였으며 공시편과 비교하여 37~43% 감소하였다. 화재위험성을 연기유해성에 대해 종합적으로 평가하면 편백목재, PBA/Si, IBBA/Si, BA/Si순서로 낮아졌다.