• Journal of Korean Orthopaedic Sports Medicine
• /
• 제3권1호
• /
• pp.22-24
• /
• 2004

Snowboarding has become one of the premier alpine sports. The past decade has seen the popularity of snowboarding increase dramatically and the recent Winter Olympic Game showcased the strong visual appeal of the sport and the youth-oriented lifestyle and culture that accompanies it. The injury profile of the sport has also undergone change along with technological advances in boot and binding systems and the changing demographics of the sports participants. Central to the development of injury-prevention strategies is knowledge of the profile of injuries that occur, understanding those who are at particular risk and, if possible, the biomechanical factors involved in each injury type. Snowboarding was initially considered a dangerous, uncontrolled, alpine sport - an opinion based on little or no scientific evidence. That evidence has rapidly grown over the past decade and we now know that snowboard injury rates are no different to those in skiing; however, the injury profile is different. The purpose of this review is to give some perspective to the current snowboard injury literature. It discusses not only the demographic profile of those injured and the type of injuries that occur, but also gives some insight into the progress that has occurred in determining the impact of specific prevention strategies, such as splints to prevent injuries to the wrist/forearm. As the literature indicates, however, some things will not change, e.g. injuries are more likely to occur in beginners and lessons need to be reinforced as a fundamental aspect of any injury-prevention strategy.

• Journal of The Korean Society of Grassland and Forage Science
• /
• 제12권3호
• /
• pp.173-177
• /
• 1992

This experiment was carried out to determine the effect of harvesting dates on the dry matter yield and quality of "Kool grazer" winter rye(Seca1e cereale L.) as a soilage crop at the Forage Experimental Field of College of Agrlc. and Life Sciences, SNU, Suweon. Four-day harvasting interval was allocated to measure the growth, yield and quality of rye from April 14 to May 18, 1987. Rye was rapidly grown as 3 cm/day and the growth was linearly recorded from the elongation to flowering stage. The dry matter and in vitro digestible dry matter(1VDDM) yields per ha were linearly increased up to 0.26 and 0.19 tonlday from April 14 to May 4 and April 14 to 29, respectively, but major breaks in yield increases occurred at the 50% heading stage, than yields increased. The highest crude protein yield was observed at the first heading stage of April 29, then decreased. Acid detergent fiber (ADF) and crude protein(CP) contents of rye at the heading stage of May 5 were 35 and 17%, respectively and the nutritive value of rye in terms of ADF and CP contents was evaluated as the I st grade hay, but neutral detergent fiber(NDF) content of rye was 47 % at the boot stage ofApril 22 and evaluated as the 2nd grade hay in terms of NDF content. The results indicate that the first heading stage or the end of April would be the most suitable harvesting time for early maturing winter rye as a soilage crop in terms of yield and quality in the middle northwestern coast rcgion of Korea. of Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제21권2호
• /
• pp.316-321
• /
• 2017

With the recent wide adoption of Linux in the fields of IoT, embedded, mobile, desktop and server industries, the importances of understanding the Linux system architecture as well as customizing the Linux system are increasing very steeply. Accordingly, the capabilities of building every component of Linux system from source code files have been important. The LFS (Linux From Scratch) site[1] guides the steps of building the basic Linux system from source files. The steps consist of build host preparation step, temporary system building step, final system building step, and system configuration and boot preparation step. However, the underlying concepts behind the steps used in building LFS are difficult to understand, particularly to the beginner. This paper analyzes the LFS build steps and reveal the core build concepts and principles used in each step. Additionally, this paper shows the measured package build times obtained from our build experience.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제9권6호
• /
• pp.1696-1704
• /
• 2008

The conventional hard disk has been the dominant database storage system for over 25 years. Recently, hybrid systems which incorporate the advantages of flash memory into the conventional hard disks are considered to be the next dominant storage systems. Their features are satisfying the requirements like enhanced data I/O, energy consumption and reduced boot time, and they are sufficient to hybrid storage systems as major database storages. However, we need to improve traditional index management schemes based on B-Tree due to the relatively slow characteristics of hard disk operations, as compared to flashmemory. In order to achieve this goal, we propose a new index management scheme called FNC-Tree. FNC-Tree-based index management enhanced search and update performance by caching data objects in unused free area of flash leaf nodes to reduce slow hard disk I/Os in index access processes. Based on the results of the performance evaluation, we conclude that our scheme outperforms the traditional index management schemes.

• KIPS Transactions on Computer and Communication Systems
• /
• 제5권12호
• /
• pp.491-498
• /
• 2016

Recently leakages of confidential information and internal date have been steadily increasing by using booting technique on portable OS such as Windows PE stored in portable storage devices (USB or CD/DVD etc). This method allows to bypass security software such as USB security or media control solution installed in the target PC, to extract data or insert malicious code by mounting the PC's storage devices after booting up the portable OS. Also this booting method doesn't record a log file such as traces of removable storage devices. Thus it is difficult to identify whether the data are leaked and use trace-back technique. In this paper is to propose method to help facilitate the process of digital forensic investigation or audit of a company by collecting and analyzing BIOS firmware images that record data relating to BIOS settings in flash memory and finding traces of portable storage devices that can be regarded as abnormal events.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제11권2호
• /
• pp.239-247
• /
• 2007

In this paper, we propose a system that the Linux is ported in embedded system with peripheral devices of CIS(CMOS Image Sensor) and GPS module. The system acquires GGA sentence from GPS module by recognizing camera and GPS is used module in Linux kernel. And then the received location information is used to include still image acquired through CIS According to this paper, We compose hardware for embedded system, attach board (including camera), port Linux BootLoader and Kernel. And. then we realize that it insert kernel in CIS control device driver and GPS module device driver.

• Geomechanics and Engineering
• /
• 제2권1호
• /
• pp.1-18
• /
• 2010

The analysis of structure response and design of buried structures subjected to dynamic destructive loads have been receiving increasing interest due to recent severe damage caused by strong earthquakes and terrorist attacks. For a comprehensive design of buried structures subjected to blast loads to be conducted, the whole system behaviour including simulation of the explosion, propagation of shock waves through the soil medium, the interaction of the soil with the buried structure and the structure response needs to be simulated in a single model. Such a model will enable more realistic simulation of the fundamental physical behaviour. This paper presents a complete model simulating the whole system using the finite element package ABAQUS/Explicit. The Arbitrary Lagrange Euler Coupling formulation is used to model the explosive charge and the soil region near the explosion to eliminate the distortion of the mesh under high deformation, while the conventional finite element method is used to model the rest of the system. The elasto-plastic Drucker-Prager Cap model is used to model the soil behaviour. The explosion process is simulated using the Jones-Wilkens-Lee equation of state. The Concrete Damage Plasticity model is used to simulate the behaviour of concrete with the reinforcement considered as an elasto-plastic material. The contact interface between soil and structure is simulated using the general Mohr-Coulomb friction concept, which allows for sliding, separation and rebound between the buried structure surface and the surrounding soil. The behaviour of the whole system is evaluated using a numerical example which shows that the proposed model is capable of producing a realistic simulation of the physical system behaviour in a smooth numerical process.

• The Journal of the Convergence on Culture Technology
• /
• 제9권1호
• /
• pp.347-353
• /
• 2023

Currently, soldiers enlisted in the military (Army) are receiving measurements (automatic, manual) of body parts and trying on sample clothing at boot training centers, and then receiving clothing in the desired size. Due to the low accuracy of the measured size during the measurement process, in the military, which uses a relatively more detailed sizing system than civilian casual clothes, the supplied clothes do not fit properly, so the frequency of changing the clothes is very frequent. In addition, there is a problem in that inventory is managed inefficiently by applying the measurement system based on the old generation body shape data collected more than a decade ago without reflecting the western-changed body type change of the MZ generation. That is, military uniforms of the necessary size are insufficient, and many unnecessary-sized military uniforms are in stock. Therefore, in order to reduce the frequency of clothing replacement and improve the efficiency of stock management, deep learning-based automatic measurement of body size, big data analysis, and machine learning-based "Personalized Combat Uniform Automatic Recommendation System for Enlisted Soldiers" is proposed.

• Journal of Korean Foot and Ankle Society
• /
• 제27권1호
• /
• pp.12-16
• /
• 2023

Purpose: Postoperative exercise for acute Achilles tendon rupture is important for a patient's return to daily life and sports. On the other hand, the protocol requires considerable effort to educate patients and continuous checking. This study evaluated the outcome of a new simple and delayed rehabilitation protocol after Achilles tendon rupture repair. Materials and Methods: From July 2014 to November 2020, one hundred eighty-three patients were operated on by one surgeon. The exercise protocol was classified into two methods. One group (immediate protocol, control group) started immediate full weight bearing with a 20° plantar flexion range of motion from two days postoperatively. Ankle dorsiflexion was restricted to 0°. The other group (delayed protocol, case group) started full weight bearing with a controlled ankle motion boot from two weeks postoperatively. No range of motion exercise was allowed until six weeks postoperatively. Age, sex, body mass index, ankle range of motion, muscle power, time to return to previous physical activity, functional score, and complication rate were evaluated. The results of the two groups were compared using a Mann-Whitney test. Statistical significance was set as p<0.05. Results: The range of motion, double heel rising, and one-leg standing were achieved faster in the control group (p<0.05). However, single-heel rising, repeated single-heel rising, return to previous activity (work, run, and sport), and functional scores showed no statistical difference (p>0.05). Conclusion: Simple and delayed postoperative rehabilitation of acute Achilles tendon rupture without active range of motion exercises showed satisfactory functional results and a low complication rate.

• Journal of Industrial Convergence
• /
• 제22권6호
• /
• pp.61-71
• /
• 2024

The study aimed to examine the mediating effect of ego resiliency and smartphone dependence in the relationship between children's attachment to mother and happiness. For the purpose, 1,143 research subjects were selected from the 12th data of the Korean Children's Panel surveyed by the Korea Institute of Child Care and Education. As for the analysis methods, frequency analysis, descriptive statistics analysis, and correlation analysis were executed, while the mediating effect was analyzed by applying Process Macro Model Number 4 analysis. The indirect effect of ego resiliency and smartphone dependence were verified by using boot-strapping. The findings are as follows. First, children's attachment to mother was found to increase their happiness. Second, ego-resilience was shown to play a partial mediating role in the relationship between children's attachment to mother and happiness. Third, the effect of children's attachment to mother on happiness was partially mediated by smartphone dependence. Based on the results, the study suggested the various practical programs to improve children's happiness.