• 한국균학회지
• /
• 제50권1호
• /
• pp.61-64
• /
• 2022

In July and September 2020, a severe outbreak of stem rot was observed on bonnet bellflower (Codonopsis lanceolata) plants in a farm located in Chuncheon, Gangwon Province, Korea. The symptoms initially appeared on the stem at or above the soil line. Later, the infected stem completely rotted and blighted. The incidence of diseased plants in the field was 2-30%. Ten isolates of Rhizoctonia sp. were obtained from the stem lesions of diseased plants. All isolates were identified as Rhizoctonia solani AG-4 based on the morphological characteristics and anastomosis test. Three isolates of R. solani AG-4 were tested for pathogenicity on bonnet bellflower plants through artificial inoculation. All tested isolates induced stem rot symptoms on the inoculated plants. The symptoms were similar to those observed in plants from the farm. This is the first report of R. solani AG-4 causing stem rot in bonnet bellflower.

• Composites Research
• /
• 제28권2호
• /
• pp.46-51
• /
• 2015

본 연구에서는 차량용 본넷의 구조 설계 및 해석을 수행하였다. 구조 설계를 위해 아마/비닐 에스테르 복합재료가 적용되었다. 아마 섬유 복합재 본넷의 제조공법은 VARTML(Vacuum Assisted Resin Transfer Molding-Light) 제조공법이 적용하였다. VARTML 공법은 한쪽 면은 견고한 금형을 사용하고 다른 면은 진공과 함께 유연한 금형을 사용하여 압력차를 이용하여 내부에 적층된 섬유에 수지를 신속하게 함침 시켜 성형하는 방법이다. 아마/비닐 에스테르 패널로 부터 시편을 가공하여 재료의 기계적 물성치를 획득하기 위한 시편 시험을 수행하였다. 이를 기반으로 자동차 본넷의 구조 설계를 수행하였다.

• 한국정밀공학회지
• /
• 제21권5호
• /
• pp.131-141
• /
• 2004

In this study a 3-D automatic die design supporting system for a bonnet panel has been developed using Pro/ROGRAM of the widespread CAD software Pro/ENGINEER A standard drawing die was defined in terms of the punch profile, the die face geometry, and the blank sheet size. The strip layout of a trimming die was defined, in addition, in terms of the trimming line and the locations of scrap cutters. Necessary relations for each design step are formulated and rules for bottom-up type 3-D die design were set up for the automatic design of drawing and trimming dies of a bonnet. With the input geometric data of punch profile, die face, and blank sheet, this 3-D design supporting system could complete the basic design process, in case of the bonnet drawing die, in a time 78% shorter than that required by a typical 2-D CAD system. The new design system showed remarkable design efficiency also when it was applied to the case of redesign and modification of the previous standard output for a different car type.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.675-681
• /
• 2002

Parametric modeling and configuration design method are a important methods for rapid design in manufacturing. This paper proposes a relation rules which parametrically models a bonnet trimming tool based on Pro/Engineer. The concept of desogn is applied a trimming die of the bonnet outer panel. Trimming die have a many parameters. Each a parameter is related the die face and punch profile. A design system consists of a Pro/Engineer, a Pro/program.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.382-386
• /
• 2001

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but Application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D Lay-Out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape

• 한국CDE학회논문집
• /
• 제7권4호
• /
• pp.233-239
• /
• 2002

This paper explores the applications of feature-based representation and design in the area of design for manufacturing to incorporate the tooling and process considerations into the early stages of bonnet tool design. The goal of this research is apply the concepts of feature-based design and to development an interactive design tool using relations and arrive at optimal design for the given process conditions. This paper illustrates the development of a tool design aided system that was constructed using these concepts and applied to designing bonnet sheet metal parts.

• 한국정밀공학회지
• /
• 제19권8호
• /
• pp.194-202
• /
• 2002

Die design of bonnet drawing is composed of upper die, lower die and blank holder. It has been performed by checked and re-design method, which cause economic and financial loss. Nowadays, CAD/CAM system is excellent, but application is low. Therefore, in specific item, drawing die of bonnet outer draw by 3-D lay-out. In this study purpose, Bonnet drawing die is designed rapidly, correctly. It's method that shape modify to resemble. This purpose lead to 3-D Lay-Out. It is to react the standard die. In rule relation, input data change all of the shape.

• 대한수학회보
• /
• 제38권2호
• /
• pp.303-315
• /
• 2001

In this paper, we investigate the topology of complex Finsler manifolds. For a complex Finsler manifold (M, F), we introduce a certain condition on the Finsler metric F on M. This is a generalization of Kahler condition for the Hermitian metric. Under this condition, we can produce a Kahler metric on M. This enables us to use the usual techniques in the Kahler and Riemannian geometry. We show that if the holomorphic sectional curvature of $ M is\geqC^2>0\; for\; some\; c>o,\; then\; diam(M)\leq\frac{\pi}{c}$ and hence M is compact. This is a generalization of the Bonnet\`s theorem in the Riemannian geometry.

• Structural Engineering and Mechanics
• /
• 제51권3호
• /
• pp.471-485
• /
• 2014

Until now, the finite corner stiffness of the right-angle frames used as horizontal girders in a bonnet, have not been considered during the design process to result in not a precise result. This paper presents a design equation set for right-angle frames used as horizontal girders in a bonnet assuming rigid corner stiffness. By comparing the center stresses of the right-angle frame according to the design equation set with the results of the finite element method, the master curves for the empirical corner stiffness can be determined as a function of slenderness ratio. A second design equation set for a right-angle frame assuming finite corner stiffness was derived and compared with the first equation set. The master curves for the corner stiffness and the second design equation set can be used to determine the design moments at the centers of the girder so that the bending stresses can be analyzed more precisely.

• Composites Research
• /
• 제28권5호
• /
• pp.291-296
• /
• 2015

본 연구에서는 자동차 구조물의 경량화를 위해 자연섬유 복합재료를 적용하여 차량용 패널의 구조 설계 및 해석을 수행하였다. 구조 설계를 위해 Flax/vinyl ester 복합재료를 적용하였다. 섬유 복합재 패널의 제조공법은 VARTML(Vacuum Assisted Resin Transfer Molding-Light) 제조공법이 적용되었다. 구조 설계 후 충돌에 의한 구조물의 안전성을 분석하기 위해 충돌 실험을 수행하였다. 충돌 실험은 유럽 보행자 보호 기준에 맞게 수행하였으며 해석 결과를 검증하기 위하여 시편을 제작해 충격 실험을 수행하였다. 또한 충격 손상 후 구조물의 잔류강도를 측정하기 위해 손상을 가한 시편의 압축강도 실험을 수행하였다.