• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.555-558
• /
• 2011

Purpose: It is relatively unusual that infraorbital rim fracture is accompanied by nasal bone fracture. In order to correct effectively, subciliary approach and intranasal manipulation are applied simultaneously. But if reduction is not successful, intranasal manipulation may become aggressive and this often causes complications. We introduce a method using intermaxillary fixation screws for decreasing such complications and effective reduction of fracture. Methods: Total seven patients with fracture of frontal process of maxilla were treated with this method. The fracture site was exposed through the subciliary approach, and one or two screws were inserted into the displaced fracture fragment. During the traction of the screws using the wire, the fracture fragment was pushed upward from the intranasal side using an elevator supplementarily and fixed with a plate and the screws. Results: In all patients, the fracture fragment was reduced successfully and no complication occurred during one year's postoperative follow-up. Conclusion: When reduction cannot be attained through a bone hook or an elevator alone, reduction of fracture fragment can be done easily using intermaxillary fixation screws. This method is less likely to cause a mucosal injury because intranasal manipulation is not aggressive. Furthermore, as the screw can be inserted and removed easily, this method is considered effective not only for fracture of frontal process of maxilla but also for fractures in other regions.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.155-156
• /
• 1998

Screw loosening and subsequent pullout can be attributed to the reduction in bone mineral density in the vertebrae manifested by osteoporosis in which the decrease in fixation strength between the cancellous bone and screw threads are accelerated by repeated loads exerted by patients own weight and activities following the surgery. In this study, the change in pullout strength of the pedicle screws was investigated before and after repeated loads were imparted. For this purpose. Diapason pedicle screws $(6.7\times40mm)$ were inserted onto fresh porcine spine specimens (T1-L5) after bone mineral density was measured using a DEXA. With an MTS, an axial load was applied at a loading rate of 0.33mm/sec until failure to measure the maximum pullout strength. Flexion moment of 7.5N-m was then imparted at 0.5Hz for 2000 cycles. It was found that the maximum pullout strength was exponentially related to BMD regardless of load types ($107.71\;\times\;\exp^{(1.43{\times}BMD)}r^2=0.93$, P<0.0001 without repeated load; ($107.71\;\times\;\exp^{(2.19{\times}BMD)}r^2=0.78$, P<0.0001 with repeated load). The results suggest that the reduction in pullout strength for pedicle screws is far more prominent in osteoporotic spine than in normal spine especially as number of repeated load was increased. More importantly, it was demonstrated that the level of bone mineral density and the activity level of the patient should be evaluated in more detail for successful implementation of pedicle screw systems in spinal surgery.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.8
• /
• pp.984-991
• /
• 2011

The aim of this study is to develop a humeral Intramedullary fixation nail (HIFN) suitable for Korean people. In this study, CT images were obtained from 72 Korean cadaveric humeral bones and 3D Korean humeral bone models were reconstructed based on the CT images to investigate anatomical characteristics. Major design parameters of HIFN were selected using the morphological measurement information of the Korean humeral bone models. Through finite element analysis and mechanical tests, the developed HIFN prototype was compared with the Polarus HIFN ($ACUMED^{(R)}$, USA), and it was found that the HIFN prototype showed similar and/or superior mechanical performance compared to the Polarus HIFN. Also, clinical validation for the HIFN prototype was carried out to check predictable troubles in surgical operations. Finally, optimal design modification was proposed to prevent the possible axillary nerve injury due to the locking screw system of the HIFN prototype.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.4
• /
• pp.503-508
• /
• 2018

Objective : Anterior odontoid screw fixation is a safe and effective method for the treatment of odontoid fractures. The surgical technique is recommended for perforation of the apical cortex of the dens by the lag screw. However, overpenetration of the apical cortex may lead to potentially serious complications such as damages of adjacent vascular and neural structures. The purpose of this study was to assess the role of three-dimensional computed tomography (CT) scan to evaluate the safe margin beyond dens tip to ventral dura for anterior odontoid screw fixation. Methods : We retrospectively analyzed the three-dimensional CT scans of the cervical spines in 55 consecutive patients at our trauma center. The patients included 38 males and 17 females aged between 22 and 73 years (mean age${\pm}$standard deviation, $45.8{\pm}14.2years$). Using sagittal images of 3-dimensional CT scan, the safe margins beyond dens tip to ventral dura as well as the appropriate screw length were measured. Results : The mean width of the apical dens tip was $9.6{\pm}1.1mm$. The mean lengths from the screw entry point to the apical dens tip and posterior end of dens tip were $39.2{\pm}2.6mm$ and $36.6{\pm}2.4mm$. The safe margin beyond apical dens tip to ventral dura was $7.7{\pm}1.7mm$. However, the safe margin beyond the posterior end of dens tip to ventral dura was decreased to $2.1{\pm}3.2mm$, which was statistically significant (p<0.01). There were no significant differences of safe margins beyond dens tip to ventral dura with patient gender and age. Conclusion : Extension by several millimeters beyond the dens tip is safe, if the trajectory of anterior odontoid screw is targeted at the apical dens tip. However, if the trajectory of the screw is targeted to the posterior end of dens tip, extension beyond dens tip may lead to damage immediately adjacent to the vental dura mater.

• Journal of Korean Foot and Ankle Society
• /
• v.20 no.3
• /
• pp.131-134
• /
• 2016

Purpose: This study aimed to evaluate the outcomes, including the complications, of open reduction and internal fixation using a headless cannulated compression screw for a fifth metatarsal base fracture. Materials and Methods: We retrospectively investigated 11 patients with 5th metatarsal base fracture who were treated with a headless cannulated compression screw. The mean follow-up period was 13 months (8~15 months), and the mean age was 46.5 years (21~70 years). We analyzed the patients' sex, age, time to union, amount of fracture displacement, and complications. The American Orthopaedic Foot and Ankle Society (AOFAS) midfoot score was used for clinical assessment. Results: The average amount of displacement decreased significantly from 3.4 mm (2.1~5.2 mm), preoperatively, to 0.4 mm (0~1.3 mm), postoperatively (p<0.001). The average bone union time was 54.1 days (41~68 days). There were no complications, such as a metal failure, irritation, and loss of a reduction. The mean AOFAS midfoot score was 97.7 (90~100) at 6 months, postoperatively. Conclusion: We suggest that a headless cannulated compression screw for 5th metatarsal base fracture is a useful and alternative method for a firm fixation without complications.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.2
• /
• pp.131-134
• /
• 2010

Inappropriate treatment of osteochondral fracture can cause osteoarthritis, pain, functional disorder. With large osteochondral fracture, reduction and fixation of the fragment using metal implant. However, when the bone fragment had less than 2mm, the fragment extracted because of difficulty of fragment fixation. Authors treated patients with fracture fragment thickness less than 2mm of osteochondral dissecans in medial femoral condyle and patella fracture using biodegradable meniscus screw, and then we obtained good result.

• Clinics in Shoulder and Elbow
• /
• v.19 no.1
• /
• pp.8-14
• /
• 2016

Background: The purpose of this study was to investigate the difference between two nailing approaches of intramedullary screw fixation, the retrograde nailing versus the anterograde nailing, on the radiological and clinical outcomes in patients with clavicle shaft fractures. Methods: From April 2002 to August 2014, we enrolled a total of 22 patients with clavicle shaft fractures to participate in this study. Twelve patients received retrograde intramedullary nailing and 10 received anterograde nailing. The average duration of follow-up was 12 months. In all the patients, we took follow-up radiographs of the anteroposterior and the axial views to assess the postoperative radiological outcomes. We measured the visual analogue scale (VAS) score, American Shoulder and Elbow Surgeons (ASES) score, and the range of motion (ROM). Results: Clinically, we did not find a statistically significant difference in the retrograde group and the anterograde group in terms of the duration to bone union, the VAS score the ASES score and the ROMs. Radiologically, we found that the difference in the clavicle shortening of the affected arm and the unaffected arm did not show a statistically significant difference at the immediate postoperative assessment. we found that the difference in the clavicle shortening of the affected arm between the immediate postoperative and the final follow-up value did not show a statistically significant difference. Conclusions: We found that both the retrograde nailing and the anterograde nailing gave a favorable outcome for clavicle shaft fractures. Although we saw evidence of clavicle shortening after intramedullary screw fixation, this was not a factor that influenced clinical outcome.

• Clinics in Shoulder and Elbow
• /
• v.20 no.1
• /
• pp.37-41
• /
• 2017

Background: Increased frequency of comminuted clavicle mid-shaft fractures and importance of functional satisfaction through early joint exercise has resulted in higher emphasis on surgical treatments. This study aimed to evaluate the clinical radiological results of treatment of clavicle mid-shaft fractures by open reduction and internal fixation using a plate with a small incision. Methods: The subjects of this study were 80 clavicle mid-shaft fracture cases treated with internal fixation using a plate from October 2010 to July 2014. Clavicle mid-shaft fractures were internally fixated using anatomical plates or locking compression plates. Achievement of bone union, union period, and clavicle length shortening were evaluated radiologically, and clinical assessment was done by using Constant and University of California at Los Angeles (UCLA) scores. Results: All 80 cases were confirmed to have achieved bone union through radiographs with an average union period of 10.9 weeks (range: 7-18 weeks). The average clavicle length of shortening in the affected side was 1.8 mm (range: 0-17 mm). The average UCLA score and Constant score were 33.6 (range: 25-35) and 92.5 (range: 65-100), respectively. Regarding complications, four cases reported skin irritation by metal plates, and one case reported a screw insertion site fracture due to minor trauma history. Conclusions: We were able to induce successful bone union and obtain clinically satisfactory results in displaced mid-shaft fractures of the clavicle without major complications such as nonunion through treatment of internal fixation using a plate.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.5 no.1
• /
• pp.75-80
• /
• 2006

Purpose: To evaluate the efficiency of Acutrak screw fixation for radial head fracture (Mason type 2) without considering the safe Bone of radial head. Materials and Methods: Consecutive seven radial head fracture of Mason type II underwent internal fixation with Acutrak screws from May 2001 to February 2003. The mean follow-up period was 1.2years (ranged, $6 months{\sim}2.5 years$). The mean age of patients was 47 years old (ranged, $36{\sim}60years$ old). The cause of injury were fall down -4 cases and traffic accident -3 cases. The results were evaluated by Mayo Clinic results scoring system. Results: Functional Rating Index of Mayo Clinic was excellent- 2 cases and good- 5 cases. There were no nonunion, loosening, heterotopic ossification, infection or degenerative changes. The postoperative range of motion in elbow joint is nearly full for flexion, extension, pronation and supination in this study Conclusion: Consideration of safe zone is not necessary when Acutrak screws are used for radial head fracture. It seems to be a useful method that Acutrak screw fixation for radial head fracture (Mason type II) could achieve good radiologic and clinical results without influencing proximal radio-ulnar joint and has powerful fixation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.15 no.3
• /
• pp.157-170
• /
• 1993

To prove the effct of semi-rigid fixation which utilize wire and rigid fixation which utilizes miniplate toward cranio-facial growth and development of growing children for teenagers, 28 rabbits-6 weeks, about 1.5kg-were experimented. They were classified three groups the semi-rigid group was 12 rabbits which were fixed with 26 gauge stainless steel wire to cross a fronto-nasal suture, the rigid group was the other 12 rabbits which were fixed with miniplate and screw, the control group was 4 rabbits which were get rid of only periosteum. The sample of fronto-nasal of rabbits which were sacrified after 2 weeks, 4 weeks, 8 weeks, and 12 weeks of the operation were investigated and made a comparative study with the light microscops. 1. At the control group, the central part of bony suture was connected with colagen bundle, the osteoblastic layer was investigated at the bony ending, new bone which covered the inside and outside faces of the bone suture was formed between periosteum. 2. Two weeks later from the experiment, ran slightly irregularly the collagen bundle which connects both bony endings of the rigid group. 3. Four weeks later from the experiment, collagen bundle of bone surface were arranged parally a little and comparing to the semi-rigid group, newly formed woven bone of surface of the adjacent bone was made obviously a little. 4. Eight weeks later from the experiment, collagen bundle which is located between both bony ending become close. Both the semi-rigid group and the rigid group showed significant formation of new bone at the periosteum and the bone surface. 12 weeks later from the experiment, both the semi-rigid group and the rigid group showed the regular running in the collagen bundle and smooth, dense periosteum. Then they assumed a similar aspect of the control group. I think that it does not give the influence to the cranio-facial growth of children or teenager to utilize a rigid fixation for a short period. Because as the time goes on, the surface of the bone suture was recovered and adjacent bone surface of the miniplate fixation showed compensatory growth, although both the semi-rigid group which utilized wire and rigid group which utilized a miniplate brought about the change of the area of the bone suture at the early period.